I need help locating a part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

baclay9 · 12-06-2010, 05:29 PM

1984 Chevy K20

Passenger size spindle

We were pressing out the ball joints on my Dad's truck and instead of it pressing out the ball joint it bent the Shikaka out of the spindle. No salvage yards around me have them so I am reaching out to you guys.

I am guessing 81-87 Chevy 3/4 4x4. I don't know if half ton spindles are the same but I seriously doubt it. Any help you could give me in locating one is greatly appreciated. Just let me know what you want for it.

RandyP · 12-06-2010, 05:56 PM

car-part.com

http://www.carsandpartsbytim.net/

http://www.north69salvage.com/

Both show to have one, off a 3/4 suburban, should be the same.

Also, 1/2 and 3/4 4x4 spindles are the same. They are available from GM still, but sorta pricey at $337 list, part # is 464039, same left to right.

benoit454 · 12-06-2010, 06:06 PM

does lmc sell them?

baclay9 · 12-06-2010, 06:11 PM

Nobody is making them. They are only available through GM.

Thanks Randy. Good to know 1/2 tons are the same. Opens up possibilities a little. I talked to the first place and they no longer are available. I have a call into the place in Mcalester and they are checking for me.

As of now I am still looking.
Posted via Mobile Device

12-06-2010, 05:29 PM	#1
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	I need help locating a part 1984 Chevy K20 Passenger size spindle We were pressing out the ball joints on my Dad's truck and instead of it pressing out the ball joint it bent the Shikaka out of the spindle. No salvage yards around me have them so I am reaching out to you guys. I am guessing 81-87 Chevy 3/4 4x4. I don't know if half ton spindles are the same but I seriously doubt it. Any help you could give me in locating one is greatly appreciated. Just let me know what you want for it.

12-06-2010, 05:56 PM	#2
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: I need help locating a part car-part.com http://www.carsandpartsbytim.net/ http://www.north69salvage.com/ Both show to have one, off a 3/4 suburban, should be the same. Also, 1/2 and 3/4 4x4 spindles are the same. They are available from GM still, but sorta pricey at $337 list, part # is 464039, same left to right. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

12-06-2010, 06:06 PM	#3
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: I need help locating a part does lmc sell them? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

12-06-2010, 06:11 PM	#4
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: I need help locating a part Nobody is making them. They are only available through GM. Thanks Randy. Good to know 1/2 tons are the same. Opens up possibilities a little. I talked to the first place and they no longer are available. I have a call into the place in Mcalester and they are checking for me. As of now I am still looking. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.