any semi-gloss black trucks?

[brett3xx]

Some people call it satin black others call it hot rod black, Im looking for pics of 67-72 semi-gloss black, not flat, but close...
Thanks in advance!!

something like this...

[oldblue1968chevy]

Nice camaro! Theres a thread for just satin black trucks somewer..

[67chevylongbed]

Here's mine, satin black:

[Longhorn Man]

both of mine used to be, but the burb has faded to a grayish, and the longhorn is a faded rusty mess.

[brett3xx]

Id love to see a satin black swb stepside, dropped, with black wheels! Anyone have a pic of that?

[Spoof]

ESLL was the last word on satin black GMCs. RIP brother.

[STP67-72]

Here are a couple of pictures of my satin black 72. It is called Hot Rod black by Medallion paint.Pictures are not that good.

[montefreak]

our 67 with Kirker hot rod black

[dave69]

here is my black 69

[darkhorse970]

This is a rendering that I saved, not exactly Satin Black, but should give you the idea.

[Spoof]

There's no denying it...satin black looks really good on our trucks. I've often wondered how a full trim satin black truck with the white mid-body paint would look, especially if the white was a nice pearl.
Thought about doing it to my truck but I chickened out and went with gloss black.

[johnyoung]

I am fairly new to the forum and will try to post photo of "El Diablo" my 67 short step side, big block, loaded down with options. 3/5 drop and 18" 338's with 8" on the front and the 9 1/2 on the back. We have been building on this evil truck since summer. Anyone out there ever had a truck fight them on eveything. I first called it the money pit and it still is but we changed the name to "El Diablo" as it just want give in. I'll try to post some pictures tonight. We were ready to fire up the 454 yesteday for the first time and the spark plug wires the guy got me are the wrong ones - everything has been like that. Anyone know how to exercise the demons out of my truck or at least lay hands on it.
Pictures this evening.

[epashhans]

Originally Posted by STP67-72

Here are a couple of pictures of my satin black 72. It is called Hot Rod black by Medallion paint.Pictures are not that good.

Hey STP67-72, what are you running for tire size on those 338's?

[DZL1]

Heres mine. First pic is Rustoleum satin black with white roof on black rallies. Second is same but with boss 338's.

DZL1.

[67chevemall]

May switch too the john deer satin...Put my kill count tally on the door

[STP67-72]

Front is 255-45s and rear is 275-45s 8.5 and 10 inch wheels
Front is 2.5 spindles with 1 coil cut and rear is about 6 inch

[sleepingbag]

Heres mine getting there...

[Rochlow]

[epashhans]

Originally Posted by STP67-72

Front is 255-45s and rear is 275-45s 8.5 and 10 inch wheels
Front is 2.5 spindles with 1 coil cut and rear is about 6 inch

Thanks Steve. Any more shots...from the side? My 67 is set up almost exactly with that same drop and I am trying to figure out what size tires. I was thinking 275-45's all the way around because I don't like the really small sidewall...but the 255-45s look pretty decent as far as sidewall goes in that picture.

[STP67-72]

Yes i should have some pictures. I will try to take some this weekend. I wanted to go 295s on rear but didn't. Most people on this board are using the 245, 255, 275, 295 series but 40,s little shorter. I will post pictures asap.

[GRUMPYONE]

I just bought a 70 step side for the wife. going to take it to the paint book and spray simi black. putting 16 smoothies ww and then going down to the interior shop and putting red and black interior. Got luck i aprentice at both shops so just out material. I will start a build thread when get it going.

[bobshotrodblazer]

check out mine on my profile page (Kirker hot rod black)

[bosco200]

Heres mine

[myoldchevytruck]

Here's mine - 3/6 static drop, ralley's and definetly keeping the in-cab tank

[myoldchevytruck]

Originally Posted by Rochlow

Sweeeet looking truck