VA Tubular upper and Lower control arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 12-11-2010, 02:34 AM

LOWERED PRICE>>>final offer before I keep them

Brand NEW
Suicide Doors lower tubular control arms and DJM uppers. They have 73-87 ball joints in them and are set up for the 73-87 tie rod ends so you can use the modern hardware that's cheaper and easily found at parts stores....just purchase a 73-87 spindle when buying and you're ready to go.

Here's a link to the SD site with the lowers
http://www.*****************/-63-87-f...lar-lower-arms

The uppers are powdercoated silver vein from DJM. THe lowers have been painted satin black.

Will sell separate for
450 lowers
200 uppers

or 600 plus shipping for both.

I will keep these for my next project if they don't sell so I am firm on the price. First to say they take them in the thread will get them. I accept paypal if you pay the fees or w/ personal funds or postal money order (or cash in person

)

VA72C10 · 12-12-2010, 01:51 AM

Pictures of actual parts

closeup of upper arms finish....

C10CORIE · 12-12-2010, 02:30 AM

What is the part number stamped into the uppers??

VA72C10 · 12-12-2010, 05:10 PM

don't see part numbers on either uppers or lowers.

VA72C10 · 12-14-2010, 11:34 AM

New lowered FIRM price....these are now officially a STEAL

scooterskoolkustoms · 12-19-2010, 06:44 PM

ok so how much for the uppers

VA72C10 · 12-19-2010, 07:00 PM

200 plus shipping for the uppers.

STOCKISH · 12-19-2010, 10:24 PM

Might be a dumb question, but do they make a bolt in cup so you can run coil springs in these?

VA72C10 · 12-19-2010, 10:38 PM

Quote:

Originally Posted by 1972SuperCheyenne

Might be a dumb question, but do they make a bolt in cup so you can run coil springs in these?

Not that I know of as far as a pre-made piece.

The coil spring ones have a bump stop perch in them also.

C10CORIE · 12-23-2010, 10:09 PM

Interested in the uppers if you'll ship to Canada.

Can you measure the bushings for me. Need the inside (part that slides on cross shaft) and the outside (part that fits inside control arm) dimensions.

VA72C10 · 12-24-2010, 12:34 AM

Quote:

Originally Posted by C10CORIE

Interested in the uppers if you'll ship to Canada.

Can you measure the bushings for me. Need the inside (part that slides on cross shaft) and the outside (part that fits inside control arm) dimensions.

No problem shipping at your expense. Can't figure how I'd measure the bushings w/out disassembling the cross shaft which I don't want to do because it's already greased and ready to mount....the poly bushings (red) measure 1" inside at the cross shaft (rectangular with a round edge you can see) and 1 3/4" overall diameter.

VA72C10 · 12-29-2010, 11:18 PM

TTT...C10CORIE still interested?

C10CORIE · 12-29-2010, 11:24 PM

I'll let you know in a couple days, if someone wants them in the meantime........sell them.

VA72C10 · 01-21-2011, 09:26 PM

Quote:

Originally Posted by VA72C10

TTT for a good deal

VA72C10 · 01-25-2011, 08:15 PM

have local interest on these...

6t9ls1 · 01-26-2011, 10:52 AM

ill take them all if you still gottem. Just let me know shipping to Chase city Va. 23924!

VA72C10 · 01-27-2011, 11:09 PM

SOLD locally

12-11-2010, 02:34 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Tubular upper and Lower control arms LOWERED PRICE>>>final offer before I keep them Brand NEW Suicide Doors lower tubular control arms and DJM uppers. They have 73-87 ball joints in them and are set up for the 73-87 tie rod ends so you can use the modern hardware that's cheaper and easily found at parts stores....just purchase a 73-87 spindle when buying and you're ready to go. Here's a link to the SD site with the lowers http://www.***************/-63-87-f...lar-lower-arms The uppers are powdercoated silver vein from DJM. THe lowers have been painted satin black. Will sell separate for 450 lowers 200 uppers or 600 plus shipping for both. I will keep these for my next project if they don't sell so I am firm** on the price. First to say they take them in the thread will get them. I accept paypal if you pay the fees or w/ personal funds or postal money order (or cash in person ) Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 12-14-2010 at 11:33 AM.

12-12-2010, 01:51 AM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tubular upper and Lower control arms Pictures of actual parts closeup of upper arms finish.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-12-2010, 02:30 AM	#3
C10CORIE Registered User Join Date: Sep 2009 Location: Calgary Alberta Posts: 202	Re: Tubular upper and Lower control arms What is the part number stamped into the uppers??

12-12-2010, 05:10 PM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tubular upper and Lower control arms don't see part numbers on either uppers or lowers. __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-14-2010, 11:34 AM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tubular upper and Lower control arms New lowered FIRM price....these are now officially a STEAL __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-19-2010, 06:44 PM	#6
scooterskoolkustoms Registered User Join Date: Feb 2010 Location: so cal Posts: 436	Re: Tubular upper and Lower control arms ok so how much for the uppers __________________ big old burb in primer.lot of work to do.

12-19-2010, 07:00 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tubular upper and Lower control arms 200 plus shipping for the uppers. __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-19-2010, 10:24 PM	#8
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Tubular upper and Lower control arms Might be a dumb question, but do they make a bolt in cup so you can run coil springs in these? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-23-2010, 10:09 PM	#10
C10CORIE Registered User Join Date: Sep 2009 Location: Calgary Alberta Posts: 202	Re: Tubular upper and Lower control arms Interested in the uppers if you'll ship to Canada. Can you measure the bushings for me. Need the inside (part that slides on cross shaft) and the outside (part that fits inside control arm) dimensions.

12-29-2010, 11:18 PM	#12
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tubular upper and Lower control arms TTT...C10CORIE still interested? __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-29-2010, 11:24 PM	#13
C10CORIE Registered User Join Date: Sep 2009 Location: Calgary Alberta Posts: 202	Re: Tubular upper and Lower control arms I'll let you know in a couple days, if someone wants them in the meantime........sell them.

01-25-2011, 08:15 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tubular upper and Lower control arms have local interest on these... __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-26-2011, 10:52 AM	#16
6t9ls1 Registered User Join Date: Aug 2008 Location: Colonial Heights, Va Posts: 32	Re: Tubular upper and Lower control arms ill take them all if you still gottem. Just let me know shipping to Chase city Va. 23924! __________________ 1969 GMC Long bed 2wd-Work in Progress 1987 GMC Short bed 2wd- 283(lunati voodoo cam, aluminum intake, edelbrock 600 carb, headers, msd ignition), 700r4 w/2800 stall, 4.88 limited slip, more to come

01-27-2011, 11:09 PM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tubular upper and Lower control arms SOLD locally __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.