4.3 L. chevy V6 in my "82" C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cr8zchevyguy · 12-15-2010, 05:20 PM

i have 1982 chevy C10 short box 2wd truck currently with a chevy 305 and a th350 3.23 gears i think origanaly it came with a 4.2 L. straight 6. my question is that my dad bought a wrecked 1992 S10 2wd with the 4.3 L. v6 and i got to drive it before we torn it down and it ran really good lots of power only 120xxx miles on it. it comes with a th700r4 i know it will bolt right in with me changing the motor mounts and trans cross member.... i just want to know if thats going to enough power i dont want a high performance machine but i also dont want to have to get and push to go up a hill i want a really good reliable daily driver what you guys think.....??? thanks.

cr8zchevyguy · 12-15-2010, 05:22 PM

oh yeah i will be using the tbi setup.

76stepsidechevy · 12-15-2010, 07:26 PM

Probably about equal to the 305 you have now but it wont feel as peppy as the s10 seeing as the full size weighs quite a bit more.

87 V20 Scottsdale · 12-15-2010, 08:03 PM

You'd better change your rear-end gear, a set of 3.73's would make it more driveable. Those tall gears coupled to a 4.3 with a 700R4 would make OD practically useless.

spudz · 12-15-2010, 08:11 PM

Id run 410s or atleast a 373 rear gear. Should be a decent truck tho. Nothing wrong with the 4.3, I like em.

Altec · 12-15-2010, 09:24 PM

I had driven a K1500 from the early '90's with a 4.3 TBI. It was respectable. Had enough booty to take out a guy who was trying to cut me off. I think you'll be happy for driving purposes.

The interesting thing was, I also drove a 4.3 TPI S10. It seemed to have less power. That is probably to do with gearing though.

I also agree on a higher (Numerical) gear. With the over-drive tranny you can run a 3.73 fine, and a 4.10 if you want the extra pep.

**old Rusty C10** · 12-15-2010, 09:32 PM

i had a 1986 with the 4.3 carbed and a th400 trans.. lousy mileage but it pulled and pulled alot. It wasnt the fastest truck i ever had but i towed a t bird on a trailer and a yard of rock in the truck so it should work ok

TimQ · 12-15-2010, 11:34 PM

Currently have the v6 4.3 in my 86 long bed and it does the job for me. I've filled the back with more stone that I ought to and she managed fine. Have also hauled a decent sized u-haul up some pretty good hills here in central PA...not the mountains you have in colorado but probably just as steep if not more so.

cr8zchevyguy · 12-16-2010, 12:59 AM

thanks guys! yeah that S10 has 3.73, to bad that rear end is to small for my truck or i would swap that too. so ill probably change that as well..... how can you tell what kind of gears you have? there are some 10 bolt 3.73 in the full size trucks right? i know there are 10 bolts 3.73 in S10's and full size cars.....

12-15-2010, 05:20 PM	#1
cr8zchevyguy Registered User Join Date: May 2010 Location: denver, colorado Posts: 11	4.3 L. chevy V6 in my "82" C10 i have 1982 chevy C10 short box 2wd truck currently with a chevy 305 and a th350 3.23 gears i think origanaly it came with a 4.2 L. straight 6. my question is that my dad bought a wrecked 1992 S10 2wd with the 4.3 L. v6 and i got to drive it before we torn it down and it ran really good lots of power only 120xxx miles on it. it comes with a th700r4 i know it will bolt right in with me changing the motor mounts and trans cross member.... i just want to know if thats going to enough power i dont want a high performance machine but i also dont want to have to get and push to go up a hill i want a really good reliable daily driver what you guys think.....??? thanks.

12-15-2010, 05:22 PM	#2
cr8zchevyguy Registered User Join Date: May 2010 Location: denver, colorado Posts: 11	Re: 4.3 L. chevy V6 in my "82" C10 oh yeah i will be using the tbi setup.

12-15-2010, 07:26 PM	#3
76stepsidechevy Registered User Join Date: Nov 2010 Location: Windsor Locks Posts: 628	Re: 4.3 L. chevy V6 in my "82" C10 Probably about equal to the 305 you have now but it wont feel as peppy as the s10 seeing as the full size weighs quite a bit more.

12-15-2010, 08:03 PM	#4
87 V20 Scottsdale Registered User Join Date: Jul 2010 Location: Georgetown, KY Posts: 183	Re: 4.3 L. chevy V6 in my "82" C10 You'd better change your rear-end gear, a set of 3.73's would make it more driveable. Those tall gears coupled to a 4.3 with a 700R4 would make OD practically useless. __________________ Andrew 1987 V20 Scottsdale 383 TBI, SM465, NP208, 14FF, 4.10 1988 C1500 Scottsdale 305, 700R4, 3.08 1986 K30 Custom Deluxe 6.2, SM465, NP205, 14FF, 4.10

12-15-2010, 08:11 PM	#5
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: 4.3 L. chevy V6 in my "82" C10 Id run 410s or atleast a 373 rear gear. Should be a decent truck tho. Nothing wrong with the 4.3, I like em. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

12-15-2010, 09:24 PM	#6
Altec Getcha Pull Join Date: Nov 2010 Location: MD Posts: 691	Re: 4.3 L. chevy V6 in my "82" C10 I had driven a K1500 from the early '90's with a 4.3 TBI. It was respectable. Had enough booty to take out a guy who was trying to cut me off. I think you'll be happy for driving purposes. The interesting thing was, I also drove a 4.3 TPI S10. It seemed to have less power. That is probably to do with gearing though. I also agree on a higher (Numerical) gear. With the over-drive tranny you can run a 3.73 fine, and a 4.10 if you want the extra pep. __________________ '81 K10 454/SM465 '86 S10 Blazer '95 H-D Softail '96 Integra Last edited by Altec; 12-15-2010 at 09:26 PM.

12-15-2010, 09:32 PM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,276	Re: 4.3 L. chevy V6 in my "82" C10 i had a 1986 with the 4.3 carbed and a th400 trans.. lousy mileage but it pulled and pulled alot. It wasnt the fastest truck i ever had but i towed a t bird on a trailer and a yard of rock in the truck so it should work ok __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-15-2010, 11:34 PM	#8
TimQ Registered User Join Date: Feb 2010 Location: Bellefonte, PA Posts: 81	Re: 4.3 L. chevy V6 in my "82" C10 Currently have the v6 4.3 in my 86 long bed and it does the job for me. I've filled the back with more stone that I ought to and she managed fine. Have also hauled a decent sized u-haul up some pretty good hills here in central PA...not the mountains you have in colorado but probably just as steep if not more so.

12-16-2010, 12:59 AM	#9
cr8zchevyguy Registered User Join Date: May 2010 Location: denver, colorado Posts: 11	Re: 4.3 L. chevy V6 in my "82" C10 thanks guys! yeah that S10 has 3.73, to bad that rear end is to small for my truck or i would swap that too. so ill probably change that as well..... how can you tell what kind of gears you have? there are some 10 bolt 3.73 in the full size trucks right? i know there are 10 bolts 3.73 in S10's and full size cars.....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.