anybody put 2000 tahoe limited wheels on square? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spudz · 12-18-2010, 11:49 AM

I just bough some 2000 tahoe limited wheels. 5lug same bolt pattern as squares but I think maybe the backspacing may be to much. Just wanted to see if anyone has used them or seen them used. I dont have the truck here to try them on. here is some pics of the wheels.

allengator · 12-18-2010, 12:56 PM

If you can space them out right, those should look great!

lilpoindexter · 03-21-2011, 01:14 AM

Anyone running these on a square?

78maliburat · 03-21-2011, 02:09 AM

put some on a 73 i had they looked fine ..now theyre on a 95 of my sons

KQQL IT · 03-21-2011, 02:10 AM

Always wanted to

love my 72 · 03-21-2011, 03:09 AM

Sorry i don't have a pic but, a few years back i had them on my 73 2WD K5.

the back spacing worked fine. I would make one recommendation though. The harden steel lug nuts from my truck cut in to the wheel when i tighten them. and one either worked itself loose or i did not tighten enough due to my fear of cutting the wheels and in just a few hundred miles made ovals of the round holes.

I would suggest buying some sort of aftermarket lug nut that is similar to the lug nut that came with that wheel, Remember that the lug nuts that came with that truck are a metric thread and will not work on the older non metric studs

bigdano · 07-09-2011, 01:21 AM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

bigdano · 07-09-2011, 06:15 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

spudz · 07-09-2011, 10:43 PM

ive already talked to you on the phone about getting some new center caps lol.

rayfinseats · 07-09-2011, 10:58 PM

My kid has a spare for his Tahoe that is aluminum with holes and it is bad ass. I'd love a set of those. They have GM stamped on them. 16" I think. 6 hole.

bigdano · 07-09-2011, 11:12 PM

small world! yes I remember you. Now I can see your truck, nice yellow!

bigdano · 07-09-2011, 11:13 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

bloodybigblock · 07-26-2011, 04:40 PM

Tryin 2 figure out where greenville is? Those wheels look better than my 22s!
Posted via Mobile Device

bigdano · 07-26-2011, 04:47 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

trout · 04-04-2013, 10:44 PM

I know this is a old thread but heres a pic of my 76 i parted out i wish the wheels were mine but one day i will find a set
Posted via Mobile Device

12-18-2010, 11:49 AM	#1
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	anybody put 2000 tahoe limited wheels on square? I just bough some 2000 tahoe limited wheels. 5lug same bolt pattern as squares but I think maybe the backspacing may be to much. Just wanted to see if anyone has used them or seen them used. I dont have the truck here to try them on. here is some pics of the wheels. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks.. Last edited by spudz; 12-18-2010 at 11:51 AM.

12-18-2010, 12:56 PM	#2
allengator Registered User Join Date: Dec 2010 Location: Burleson, Texas Posts: 596	Re: anybody put 2000 tahoe limited wheels on square? If you can space them out right, those should look great! __________________ Allengator Outta the Blue (my band - available for hire in the DFW area!) 1980 Chevy SWB Pickup (build thread) 1951 Chevy Sedan Delivery 2004 Chevy Tahoe Z71 2011 Harley Davidson Street Glide 2018 Silverado Z71 Crew Cab

03-21-2011, 01:14 AM	#3
lilpoindexter Registered User Join Date: Sep 2010 Location: los angeles Posts: 1,134	Re: anybody put 2000 tahoe limited wheels on square? Anyone running these on a square?

03-21-2011, 02:09 AM	#4
78maliburat Registered User Join Date: Jul 2009 Location: cleburne texas Posts: 174	Re: anybody put 2000 tahoe limited wheels on square? put some on a 73 i had they looked fine ..now theyre on a 95 of my sons

03-21-2011, 02:10 AM	#5
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,254	Re: anybody put 2000 tahoe limited wheels on square? Always wanted to

03-21-2011, 03:09 AM	#6
love my 72 Registered User Join Date: Jul 2000 Location: East Bay,CA Posts: 298	Re: anybody put 2000 tahoe limited wheels on square? Sorry i don't have a pic but, a few years back i had them on my 73 2WD K5. the back spacing worked fine. I would make one recommendation though. The harden steel lug nuts from my truck cut in to the wheel when i tighten them. and one either worked itself loose or i did not tighten enough due to my fear of cutting the wheels and in just a few hundred miles made ovals of the round holes. I would suggest buying some sort of aftermarket lug nut that is similar to the lug nut that came with that wheel, Remember that the lug nuts that came with that truck are a metric thread and will not work on the older non metric studs __________________ 51 Chevy 3100 Deluxe Cab(SOLD) 65 **stang 6cyl 70 C10 Long Bed Fleetside(1st truck,thanks Dad![SOLD]) 72 C10 Short Bed Fleetside 73 Blazer 2WD Catalina Blue White Top(Needs Love) 73 Blazer 2WD Work in progress LT1/4L60E 83 Grand National (SOLD) 94 Blazer K1500 Silverado (SOLD) 96 Impala SS All original (NEXT IN LINE 2 B SOLD) 99 Tahoe 2DR, 2WD

07-09-2011, 01:21 AM	#7
bigdano Registered User Join Date: Jul 2011 Location: duncan, sc Posts: 5	Re: anybody put 2000 tahoe limited wheels on square? Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help.

07-09-2011, 06:15 PM	#8
bigdano Registered User Join Date: Jul 2011 Location: duncan, sc Posts: 5	Re: anybody put 2000 tahoe limited wheels on square? Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help.

07-09-2011, 10:43 PM	#9
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: anybody put 2000 tahoe limited wheels on square? ive already talked to you on the phone about getting some new center caps lol. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

07-09-2011, 10:58 PM	#10
rayfinseats Registered User Join Date: Dec 2010 Location: sioux city, iowa Posts: 619	Re: anybody put 2000 tahoe limited wheels on square? My kid has a spare for his Tahoe that is aluminum with holes and it is bad ass. I'd love a set of those. They have GM stamped on them. 16" I think. 6 hole.

07-09-2011, 11:12 PM	#11
bigdano Registered User Join Date: Jul 2011 Location: duncan, sc Posts: 5	Re: anybody put 2000 tahoe limited wheels on square? small world! yes I remember you. Now I can see your truck, nice yellow!

07-09-2011, 11:13 PM	#12
bigdano Registered User Join Date: Jul 2011 Location: duncan, sc Posts: 5	Re: anybody put 2000 tahoe limited wheels on square? Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help.

07-26-2011, 04:40 PM	#13
bloodybigblock Registered User Join Date: Jul 2011 Location: hanceville alabama Posts: 268	Re: anybody put 2000 tahoe limited wheels on square? Tryin 2 figure out where greenville is? Those wheels look better than my 22s! Posted via Mobile Device

07-26-2011, 04:47 PM	#14
bigdano Registered User Join Date: Jul 2011 Location: duncan, sc Posts: 5	Re: anybody put 2000 tahoe limited wheels on square? Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help.

04-04-2013, 10:44 PM	#15
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: anybody put 2000 tahoe limited wheels on square? I know this is a old thread but heres a pic of my 76 i parted out i wish the wheels were mine but one day i will find a set Posted via Mobile Device Attached Images __________________ Edited by staff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.