kick panels for speakers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sooner84 · 12-28-2010, 04:04 PM

Does captkaos still sell the kick panels that hold speakers? I looked on his site and couldnt find them, maybe i missed them. Or is there somewhere else i could get some for an 84?

*nbpro* · 12-28-2010, 04:15 PM

www.73-87chevytrucks.com is the site

These are currently OUT OF STOCK 1973-1987(91) Lower Kick Panels
http://store.73-87chevytrucks.com/me...y_Code=7387INT
...................................................................................
there are some Silverado Kick Panels

http://store.73-87chevytrucks.com/me...y_Code=7387INT

THE "10" SILVERADO · 12-28-2010, 04:33 PM

You could always do what the PO of mine did.....cut out holes in your current kick-panels and then cut holes in the bottom of the cab to mount them in.....

I wouldn't advise doing that though

74chevy3/4 · 12-28-2010, 07:14 PM

www.ClassicParts.com

tucsonjwt · 12-28-2010, 09:34 PM

If you just want standard speakers, you can cut a hole in the stock kick panel and mount the speakers flush. You can also mount speakers in homemade painted boxes in the cab corners behind the seat. I am OK with mine that way, but I do not blast out the tunes. I also have my 6 CD changer mounted in the behind the seat homemade storage shelf shown in the pic on the steps.

*nbpro* · 12-28-2010, 09:43 PM

Home-Made Speaker Kick Panels
http://67-72chevytrucks.com/vboard/s...d.php?t=230578

Sooner84 · 12-28-2010, 10:39 PM

I was thinking about cutting holes in the stock kick panels, but decided against it..
I already have 6x9s in the cab corners.
any idea on when they'll be back in stock??

*nbpro* · 12-28-2010, 10:54 PM

no sir i dont but you can pm captkaos on here and ask

74chevy3/4 · 12-31-2010, 01:37 AM

http://www.ClassicParts.com/searchprods.asp

blazinzuk · 12-31-2010, 01:45 AM

If you want to run separates q logic makes some too you can get them from crutchfield
Posted via Mobile Device

THE "10" SILVERADO · 12-31-2010, 02:00 AM

Quote:

Originally Posted by Sooner84

I was thinking about cutting holes in the stock kick panels, but decided against it..
I already have 6x9s in the cab corners.
any idea on when they'll be back in stock??

Where you thinking of cutting the stock kick-panels and cut a hole in the cab? I know you decided against it but I was just wondering...cause this is what I ended up having...

Sooner84 · 12-31-2010, 11:06 AM

Yeah thats how we were going to do it, that was after we found out they wouldnt fit in my doors.
And actually captkaos isnt out of stock, i guess the link was just messed up.
Think i may get some of them..
http://store.73-87chevytrucks.com/me...y_Code=7387INT

The--Tank · 12-31-2010, 01:17 PM

I just got my son some for Christmas that are 6.5"
with tweeters. They are nice made by Q-form. If you want I can get you some.

Sooner84 · 12-31-2010, 02:07 PM

Quote:

Originally Posted by The--Tank

I just got my son some for Christmas that are 6.5"
with tweeters. They are nice made by Q-form. If you want I can get you some.

Got any pictures?

Scott26 · 12-31-2010, 02:09 PM

LMC sells them

The--Tank · 12-31-2010, 02:18 PM

I don't. Plan on getting them put in this weekend. You can see the same one we got on crutchfield. We held them up and they are going to look sharp. His interior is black and the grain on these match really well.

kikkegek · 12-31-2010, 03:04 PM

I am gonna follow this! I am building my own. but I am always looking for good ideas!

asphaltburner · 12-31-2010, 03:18 PM

Yo!
You could build these,...
http://67-72chevytrucks.com/vboard/s...=301610&page=7
starts at post #162.
They were EASY, sound great, and look pretty good (even if I do say so, myself!).
It's nice having that much speaker in each corner and I didn't have to cut up my doors or the panels (mine are original factory, and irreplaceable green!).
Happy New Year!
Todd.

Sooner84 · 12-31-2010, 07:48 PM

Quote:

Originally Posted by asphaltburner

Yo!
You could build these,...
http://67-72chevytrucks.com/vboard/s...=301610&page=7
starts at post #162.
They were EASY, sound great, and look pretty good (even if I do say so, myself!).
It's nice having that much speaker in each corner and I didn't have to cut up my doors or the panels (mine are original factory, and irreplaceable green!).
Happy New Year!
Todd.

Those look good, but ive already got 6x9s in the cab corners.
I think im more than likely going with the kick panels from captkaos.

12-28-2010, 04:15 PM	#2
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: kick panels for speakers www.73-87chevytrucks.com is the site These are currently OUT OF STOCK 1973-1987(91) Lower Kick Panels http://store.73-87chevytrucks.com/me...y_Code=7387INT ................................................................................... there are some Silverado Kick Panels http://store.73-87chevytrucks.com/me...y_Code=7387INT Last edited by nbpro; 12-28-2010 at 04:23 PM.

12-28-2010, 04:33 PM	#3
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: kick panels for speakers You could always do what the PO of mine did.....cut out holes in your current kick-panels and then cut holes in the bottom of the cab to mount them in..... I wouldn't advise doing that though __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9 Last edited by THE "10" SILVERADO; 12-28-2010 at 04:33 PM.

12-28-2010, 07:14 PM	#4
74chevy3/4 Registered User Join Date: Oct 2010 Location: duluth minnesota Posts: 38	Re: kick panels for speakers www.ClassicParts.com

12-28-2010, 09:34 PM	#5
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,188	Re: kick panels for speakers If you just want standard speakers, you can cut a hole in the stock kick panel and mount the speakers flush. You can also mount speakers in homemade painted boxes in the cab corners behind the seat. I am OK with mine that way, but I do not blast out the tunes. I also have my 6 CD changer mounted in the behind the seat homemade storage shelf shown in the pic on the steps. Attached Images

12-28-2010, 09:43 PM	#6
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: kick panels for speakers Home-Made Speaker Kick Panels http://67-72chevytrucks.com/vboard/s...d.php?t=230578

12-28-2010, 04:04 PM	#1
Sooner84 Registered User Join Date: Dec 2009 Location: Moore, Oklahoma Posts: 379	kick panels for speakers Does captkaos still sell the kick panels that hold speakers? I looked on his site and couldnt find them, maybe i missed them. Or is there somewhere else i could get some for an 84? __________________ 1984 chevy swb(1st truck, sold..) 2001 RCSB silverado, 5.3 with a little extra 2004 ECSB Silverado LT, 5.3 cam & bolt ons, 4l60e shift kit/stall, g80 & 3.73s My first (1984 c10) Build

12-28-2010, 10:39 PM	#7
Sooner84 Registered User Join Date: Dec 2009 Location: Moore, Oklahoma Posts: 379	Re: kick panels for speakers I was thinking about cutting holes in the stock kick panels, but decided against it.. I already have 6x9s in the cab corners. any idea on when they'll be back in stock?? __________________ 1984 chevy swb(1st truck, sold..) 2001 RCSB silverado, 5.3 with a little extra 2004 ECSB Silverado LT, 5.3 cam & bolt ons, 4l60e shift kit/stall, g80 & 3.73s My first (1984 c10) Build

12-28-2010, 10:54 PM	#8
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: kick panels for speakers no sir i dont but you can pm captkaos on here and ask

12-31-2010, 01:37 AM	#9
74chevy3/4 Registered User Join Date: Oct 2010 Location: duluth minnesota Posts: 38	Re: kick panels for speakers http://www.ClassicParts.com/searchprods.asp

12-31-2010, 01:45 AM	#10
blazinzuk Registered User Join Date: Oct 2009 Location: Afton Wy Posts: 77	Re: kick panels for speakers If you want to run separates q logic makes some too you can get them from crutchfield Posted via Mobile Device

12-31-2010, 11:06 AM	#12
Sooner84 Registered User Join Date: Dec 2009 Location: Moore, Oklahoma Posts: 379	Re: kick panels for speakers Yeah thats how we were going to do it, that was after we found out they wouldnt fit in my doors. And actually captkaos isnt out of stock, i guess the link was just messed up. Think i may get some of them.. http://store.73-87chevytrucks.com/me...y_Code=7387INT __________________ 1984 chevy swb(1st truck, sold..) 2001 RCSB silverado, 5.3 with a little extra 2004 ECSB Silverado LT, 5.3 cam & bolt ons, 4l60e shift kit/stall, g80 & 3.73s My first (1984 c10) Build

12-31-2010, 01:17 PM	#13
The--Tank Registered User Join Date: May 2010 Location: Oklahoma Posts: 17	Re: kick panels for speakers I just got my son some for Christmas that are 6.5" with tweeters. They are nice made by Q-form. If you want I can get you some. __________________ 1986 Chevy 1/2 ton 4x4 350 Auto Shortbed Fleetside

12-31-2010, 02:09 PM	#15
Scott26 Registered User Join Date: Nov 2010 Location: Fresno California Posts: 65	Re: kick panels for speakers LMC sells them __________________ 1986 GMC Sierra Classic 4X4

12-31-2010, 02:18 PM	#16
The--Tank Registered User Join Date: May 2010 Location: Oklahoma Posts: 17	Re: kick panels for speakers I don't. Plan on getting them put in this weekend. You can see the same one we got on crutchfield. We held them up and they are going to look sharp. His interior is black and the grain on these match really well. Attached Images __________________ 1986 Chevy 1/2 ton 4x4 350 Auto Shortbed Fleetside

12-31-2010, 03:04 PM	#17
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: kick panels for speakers I am gonna follow this! I am building my own. but I am always looking for good ideas! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS



Register or Log In To remove these advertisements.

12-31-2010, 03:18 PM	#18
asphaltburner Registered User Join Date: Jul 2008 Location: Ault, Colorado Posts: 862	Re: kick panels for speakers Yo! You could build these,... http://67-72chevytrucks.com/vboard/s...=301610&page=7 starts at post #162. They were EASY, sound great, and look pretty good (even if I do say so, myself!). It's nice having that much speaker in each corner and I didn't have to cut up my doors or the panels (mine are original factory, and irreplaceable green!). Happy New Year! Todd. __________________ '78 3/4 ton 4x4 custom "Todd-built" FRANKENTRUCK!

Register or Log In To remove these advertisements.