Newbie. Here's my squares. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ELMER MUD · 12-31-2010, 05:22 PM

Been lingering around here for a while, but this is my first post. I really enjoy this site.

*87 chevy silverado* · 12-31-2010, 05:24 PM

nice trucks. what is the 70s one made for sand hills?

manimal · 12-31-2010, 05:31 PM

Those trucks are very nice! That mud truck is flat AWESOME!

Conundrum · 12-31-2010, 05:31 PM

Welcome to the site!

Do I see a chop top on your mud racer?

Nice trucks by the way.

ELMER MUD · 12-31-2010, 05:32 PM

Its a 78 blazer and its for mud drags

mooseknuckles · 12-31-2010, 05:41 PM

nice...

ELMER MUD · 12-31-2010, 10:16 PM

yeah the mud racer is chopped 3'' I had to so it would fit in the garage. and the 87 i bought back in july as a daily driver, plan on doing alot to it but its hard to do when you drive it every day. I did get a djm 3/5 drop for it last week and planned on putting it on over Christmas but the flip kit box was missing one of the brackets and was supposed to come today but didnt happen. thanks guys for all compliments. i will post picks on progress.

Restrorob · 12-31-2010, 10:19 PM

Welcome Aboard !

WOW..... I'll bet your neighbors hate when you fire that mud racer up....

Sueweeet rigs for sure !

rayfinseats · 01-01-2011, 01:36 AM

Your mud truck is f***ing cool !!!! Could I get some detlai pictures? Chassis and interior? I'm building a 83 shop truck SOMETHING like that.

ELMER MUD · 01-01-2011, 12:35 PM

here is some interior picks

81chevylongbed · 01-01-2011, 01:37 PM

man...those r both beautiful trucks ur mud truck is kewl...and ur dd looks just like mine...what motor is in it?

ELMER MUD · 01-01-2011, 02:44 PM

350 tbi,thanks for the compliments

ELMER MUD · 01-01-2011, 03:01 PM

it ant pretty but runs good

*nbpro* · 01-01-2011, 04:30 PM

to the site sweet looking trucks

3r!c84 · 01-01-2011, 04:48 PM

Tell us about the motor in the mud truck? I love the flames.. Might do that to mine befor I paint it..
Posted via Mobile Device

str8axle55 · 01-01-2011, 05:02 PM

Great looking trucks, love the Mudder.

ELMER MUD · 01-01-2011, 08:38 PM

its a 406 dart block 14 degree pro action heads, dynoed 689hp getting ready to pull it out, just doesent make enuff torque. building a 565 its suposed to make around 1000hp and big torque numbers. will see

codydubb · 01-02-2011, 03:00 AM

Sweet trucks love the DD, looks like mine does now, throw that 406 in the DD and have some fun!

Restrorob · 01-02-2011, 09:57 AM

Quote:

Originally Posted by ELMER MUD

building a 565 its suposed to make around 1000hp and big torque numbers.

Now that would make it skim across the top huh !?!?

justpball · 01-02-2011, 10:02 AM

Very nice rides you have there!

motornut · 01-02-2011, 10:10 AM

gotta love them cool trucks

jitteryguy · 01-02-2011, 01:44 PM

Quote:

Originally Posted by ELMER MUD

yeah the mud racer is chopped 3'' I had to so it would fit in the garage.

that is the best reason I ever heard to chop a top, cool trucks !

68Timber · 01-02-2011, 08:30 PM

Quote:

Originally Posted by ELMER MUD

yeah the mud racer is chopped 3'' I had to so it would fit in the garage.

Sounds like "the neighborhood association mod" or "the wifey mod", depending on who complained.

Sweet trucks!

ELMER MUD · 01-02-2011, 10:19 PM

believe it or not they love it, a few have even came to watch when i raced near by. i try to be respectable and not run it to early or late. thanks for all the compliments

MTCK · 01-03-2011, 02:39 AM

Welcome and nice rides! A coworker of mine has a mud drag truck, looks very similar in design to yours. Wider 39.5 boggers in the back and the skinnys up front. I got a ride last summer and holy heck do those things move... 7k with open headers will make anybody smile.

12-31-2010, 05:22 PM	#1
ELMER MUD Registered User Join Date: Aug 2010 Location: KCMO. Posts: 29	Newbie. Here's my squares. Been lingering around here for a while, but this is my first post. I really enjoy this site. Attached Images

12-31-2010, 05:24 PM	#2
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Nwebie. Here's my squares. nice trucks. what is the 70s one made for sand hills?

12-31-2010, 05:31 PM	#3
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Nwebie. Here's my squares. Those trucks are very nice! That mud truck is flat AWESOME! __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

12-31-2010, 05:31 PM	#4
Conundrum Registered User Join Date: Oct 2008 Location: Parsons, KS Posts: 652	Re: Nwebie. Here's my squares. Welcome to the site! Do I see a chop top on your mud racer? Nice trucks by the way. __________________ 74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r http://67-72chevytrucks.com/vboard/s...d.php?t=460030 97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver 220,000 miles, all stock for now

12-31-2010, 05:32 PM	#5
ELMER MUD Registered User Join Date: Aug 2010 Location: KCMO. Posts: 29	Re: Nwebie. Here's my squares. Its a 78 blazer and its for mud drags

12-31-2010, 05:41 PM	#6
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Nwebie. Here's my squares. nice... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

12-31-2010, 10:16 PM	#7
ELMER MUD Registered User Join Date: Aug 2010 Location: KCMO. Posts: 29	Re: Newbie. Here's my squares. yeah the mud racer is chopped 3'' I had to so it would fit in the garage. and the 87 i bought back in july as a daily driver, plan on doing alot to it but its hard to do when you drive it every day. I did get a djm 3/5 drop for it last week and planned on putting it on over Christmas but the flip kit box was missing one of the brackets and was supposed to come today but didnt happen. thanks guys for all compliments. i will post picks on progress. Last edited by ELMER MUD; 12-31-2010 at 10:18 PM.

12-31-2010, 10:19 PM	#8
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Newbie. Here's my squares. Welcome Aboard ! WOW..... I'll bet your neighbors hate when you fire that mud racer up.... Sueweeet rigs for sure ! __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!*

01-01-2011, 01:36 AM	#9
rayfinseats Registered User Join Date: Dec 2010 Location: sioux city, iowa Posts: 619	Re: Newbie. Here's my squares. Your mud truck is f**ing cool !!!! Could I get some detlai pictures? Chassis and interior? I'm building a 83 shop truck SOMETHING like that. Last edited by rayfinseats; 01-01-2011 at 01:39 AM.*

01-01-2011, 12:35 PM	#10
ELMER MUD Registered User Join Date: Aug 2010 Location: KCMO. Posts: 29	Re: Newbie. Here's my squares. here is some interior picks Attached Images

01-01-2011, 01:37 PM	#11
81chevylongbed Registered User Join Date: Nov 2010 Location: Olpe(Emporia), Kansas Posts: 15	Re: Newbie. Here's my squares. man...those r both beautiful trucks ur mud truck is kewl...and ur dd looks just like mine...what motor is in it?

01-01-2011, 02:44 PM	#12
ELMER MUD Registered User Join Date: Aug 2010 Location: KCMO. Posts: 29	Re: Newbie. Here's my squares. 350 tbi,thanks for the compliments

01-01-2011, 03:01 PM	#13
ELMER MUD Registered User Join Date: Aug 2010 Location: KCMO. Posts: 29	Re: Newbie. Here's my squares. it ant pretty but runs good Attached Images

01-01-2011, 04:30 PM	#14
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Newbie. Here's my squares. to the site sweet looking trucks

01-01-2011, 04:48 PM	#15
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Newbie. Here's my squares. Tell us about the motor in the mud truck? I love the flames.. Might do that to mine befor I paint it.. Posted via Mobile Device __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90



Register or Log In To remove these advertisements.

01-01-2011, 05:02 PM	#16
str8axle55 Registered User Join Date: May 2009 Location: Weymouth Ma Posts: 489	Re: Newbie. Here's my squares. Great looking trucks, love the Mudder. __________________ 03 GMC Yukon XL 2500 Quadrasteer, wife`s DD 84 Chevy K30 CC SRW 55 Chevy 210 2dr post

01-01-2011, 08:38 PM	#17
ELMER MUD Registered User Join Date: Aug 2010 Location: KCMO. Posts: 29	Re: Newbie. Here's my squares. its a 406 dart block 14 degree pro action heads, dynoed 689hp getting ready to pull it out, just doesent make enuff torque. building a 565 its suposed to make around 1000hp and big torque numbers. will see

01-02-2011, 03:00 AM	#18
codydubb Registered User Join Date: Mar 2010 Location: Preston Id Posts: 86	Re: Newbie. Here's my squares. Sweet trucks love the DD, looks like mine does now, throw that 406 in the DD and have some fun! __________________ 1985 Chevy C10 350 .60 over iron eagle h-beam rods, sealed power high comp pistons, forged crank, vortec heads, edelbrock performer rpm vortec intake, roller rockers, .488 .510 cam 750 Demon Double Pumper, Longtube headers, Dual Flowmaster exhaust,Dual electric fans, Proform electric water pump. TCI 3500 Stall Converter th350 trans B&M shift kit 10 bolt 3.73 Detroit Locker

01-02-2011, 10:02 AM	#20
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: Newbie. Here's my squares. Very nice rides you have there! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

01-02-2011, 10:10 AM	#21
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Newbie. Here's my squares. gotta love them cool trucks __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

01-02-2011, 10:19 PM	#24
ELMER MUD Registered User Join Date: Aug 2010 Location: KCMO. Posts: 29	Re: Newbie. Here's my squares. believe it or not they love it, a few have even came to watch when i raced near by. i try to be respectable and not run it to early or late. thanks for all the compliments

01-03-2011, 02:39 AM	#25
MTCK Registered User Join Date: Dec 2009 Location: Fairbanks, AK Posts: 1,830	Re: Newbie. Here's my squares. Welcome and nice rides! A coworker of mine has a mud drag truck, looks very similar in design to yours. Wider 39.5 boggers in the back and the skinnys up front. I got a ride last summer and holy heck do those things move... 7k with open headers will make anybody smile. __________________ -Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck

Register or Log In To remove these advertisements.