Steering column shifter collar??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 01-03-2011, 12:31 PM

Looking to buy 71 C10 truck that was a 3 on the tree, now a real 4 speed. I can't stand seeing the lug sticking out on the column from where the factory shift lever was. Does anyone know where we can find a collar for a floor shifted truck???

67swb72klb · 01-03-2011, 02:43 PM

they are kinda rare good luck though im shure sombody has one prob a whole column

**LockDoc** · 01-03-2011, 03:47 PM

-
There are pics in this thread of what I did with mine...

http://www.67-72chevytrucks.com/vboa...d.php?t=211041

This was a tilt but you could do the same thing with a non-tilt.

LockDoc

PanelDeland · 01-03-2011, 04:37 PM

I've only ever seen one factory non-shifter column in my life.There are tons of them at Charlotte but few without a shifter on them.And I make it to Charlotte for almost every swap meet(spring and Fall) for the last 8-10 years

Longhorn Man · 01-03-2011, 06:05 PM

med duty trucks were all made with no shifter on the column. Another billion or two were 4 speed trucks 10 - 30 series.
I can't see why it'd be hard to find. Last time I had one I couldn't give it away, I TRIED!

**specialtyretail** · 01-03-2011, 06:58 PM

That's the way it goes. I thought a bob truck column would be a good place to start looking. Going to check out LockDoc's thread as well. Thanks everyone.

vintageozarks · 01-04-2011, 08:58 PM

I have a complete Non shift column non tilt needs new bearings collar will work on yours in Wheatland MO.65779 larry@vintageozarks.com

01-03-2011, 12:31 PM	#1
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Steering column shifter collar??? Looking to buy 71 C10 truck that was a 3 on the tree, now a real 4 speed. I can't stand seeing the lug sticking out on the column from where the factory shift lever was. Does anyone know where we can find a collar for a floor shifted truck???

01-03-2011, 02:43 PM	#2
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,478	Re: Steering column shifter collar??? they are kinda rare good luck though im shure sombody has one prob a whole column __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

01-03-2011, 03:47 PM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,066	Re: Steering column shifter collar??? - There are pics in this thread of what I did with mine... http://www.67-72chevytrucks.com/vboa...d.php?t=211041 This was a tilt but you could do the same thing with a non-tilt. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 01-03-2011 at 03:51 PM.

01-03-2011, 04:37 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Steering column shifter collar??? I've only ever seen one factory non-shifter column in my life.There are tons of them at Charlotte but few without a shifter on them.And I make it to Charlotte for almost every swap meet(spring and Fall) for the last 8-10 years __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 01-03-2011 at 04:38 PM.

01-03-2011, 06:05 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Steering column shifter collar??? med duty trucks were all made with no shifter on the column. Another billion or two were 4 speed trucks 10 - 30 series. I can't see why it'd be hard to find. Last time I had one I couldn't give it away, I TRIED!

01-03-2011, 06:58 PM	#6
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Steering column shifter collar??? That's the way it goes. I thought a bob truck column would be a good place to start looking. Going to check out LockDoc's thread as well. Thanks everyone.

01-04-2011, 08:58 PM	#7
vintageozarks Registered User Join Date: Jul 2007 Location: Wheatland MO 65779 Posts: 16	Re: Steering column shifter collar??? I have a complete Non shift column non tilt needs new bearings collar will work on yours in Wheatland MO.65779 larry@vintageozarks.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.