Front end rebuild kit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 01-03-2011, 09:29 PM

Where are you getting the best front end rebuild kit from? I see LMC has a decent looking one for about $450. Any better quality priced ones to look at?

peglegs · 01-03-2011, 09:53 PM

i havent done any comparisons with other company's but i used this company over 40 years ago, might mean something im also rebuilding one soon so keep us posted here.

http://www.kanter.com/truck/index.ht...900&OVNDID=ND2

oldblue1968chevy · 01-03-2011, 10:51 PM

lmc is probably all cheap parts

go to orielly and order everything MOOG for your truck

vanceman · 01-03-2011, 11:09 PM

Quote:

Originally Posted by oldblue1968chevy

lmc is probably all cheap parts

go to orielly and order everything MOOG for your truck

I agree LMC is junk. I started buying MOOG from Orielly untill I found www.Rockauto.com they are a lot cheaper and I didn't have to pay any taxes. The parts shipped direct from Federal Moogul.

OhOneWS6 · 01-03-2011, 11:29 PM

I priced Moog Rock Auto and Amazon. I ended up going with Early Classic Enterprises and I'm am glad I did. The price difference was marginal and the top notch customer support from ECE was well worth the couple of extra $.

alsriv2 · 01-04-2011, 11:26 AM

Has anyone looked at Kanter Auto Parts? A few years ago I did a front end overhaul on another US built 1978 truck front end and had excellent results with all the parts purchased. I have a '69 GMC 2500 and a '69 Chevy C10 that I will be rebuilding the fronts on soon and will try them first based on my experience. I do not think they sell modified parts for lowering etc, but it might be good to check them out.
On a side note, Thanks for the advice about MOOG parts, I have not tried that route, but will be sure to try them.

AL
'69 GMC Longhorn
"69 Chevy CST 396

marcsRX · 01-04-2011, 11:47 AM

I got the ECE rebuild kit, all MOOG, just haven't had the time to put it all in yet...

cdowns · 01-04-2011, 12:17 PM

i like to shop at my local stores for common readily available stuff like that

ls1nova71 · 01-04-2011, 12:41 PM

I just priced all Moog parts at Oreiley's and it was over $660, I got all the same from Rockauto for $440 including shipping. You have to wait for it, but for $220, I'll wait!

**Clyde65** · 01-04-2011, 02:37 PM

I used the ECE rebuilt kit, I also priced mine through LMC and also Oreilly, ECE was cheaper and They were all Moog parts. I rebuilt my front and it is night and day difference. You get what you pay for, I would NOT buy anything but Moog front end parts.

GobbleStalker · 01-04-2011, 04:05 PM

I purchased the CPP kit but have not put it in yet?

Jack_71C10 · 01-04-2011, 04:59 PM

my kit from CPP, ended up being all Tiawan parts.
I was a little disapointed.

PanelDeland · 01-04-2011, 05:02 PM

Steering,brakes and suspension are too important to skimp on.I like Moog or TRW for all that stuff.I also don't much enjoy suspension work so I don't want to do it over.

oldblue1968chevy · 01-04-2011, 05:38 PM

What is TRW?

cdowns · 01-04-2011, 06:08 PM

Quote:

Originally Posted by oldblue1968chevy

What is TRW?

http://www.trw.com/who_we_are/history

peglegs · 01-04-2011, 06:14 PM

Quote:

Originally Posted by cdowns

http://www.trw.com/who_we_are/history

dead end couldnt get anywhere

**Clyde65** · 01-04-2011, 06:20 PM

try this one...but it says they supply Vehicle Manufacturers, I would go Moog!

http://www.trw.com/

peglegs · 01-04-2011, 06:24 PM

clyde i think these sites r company/product info not a site to purchase

**leddzepp** · 01-04-2011, 06:24 PM

I bought all my front end stuff at Star Auto. Partsmaster is their store brand. Made in USA. Identical to Moog in every way, same exact thing. I compared them side-by-side. 1/3 the cost

**Clyde65** · 01-04-2011, 07:09 PM

I agree pegleggs, I was just clarifying for someone else.

Flatbed136 · 01-04-2011, 07:12 PM

Good Info!

I'm looking at rebuilding mine sometime.

Thanks

bajaracing · 01-04-2011, 07:51 PM

try http://www.classicperform.com/6092chevtrk.htm#11

peglegs · 01-05-2011, 03:15 AM

sorry clyde i missed that one.

72BlckButy · 01-05-2011, 08:39 AM

Moog... for my next rebuild.

Jack_71C10 · 01-05-2011, 02:10 PM

Quote:

Originally Posted by bajaracing

try http://www.classicperform.com/6092chevtrk.htm#11

http://www.classicperform.com/Store/.../6062SFKPT.htm

I bought these. Made in Taiwan
Would not recommend them.

01-03-2011, 09:53 PM	#2
peglegs Registered User Join Date: Jul 2009 Location: grants pass, oregon Posts: 390	Re: Front end rebuild kit? i havent done any comparisons with other company's but i used this company over 40 years ago, might mean something im also rebuilding one soon so keep us posted here. http://www.kanter.com/truck/index.ht...900&OVNDID=ND2 __________________ 1990 chevy 4x4 with a 1940 IHC body

01-03-2011, 10:51 PM	#3
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Front end rebuild kit? lmc is probably all cheap parts go to orielly and order everything MOOG for your truck __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-03-2011, 11:29 PM	#5
OhOneWS6 Registered User Join Date: Dec 2009 Location: DFW, TX Posts: 764	Re: Front end rebuild kit? I priced Moog Rock Auto and Amazon. I ended up going with Early Classic Enterprises and I'm am glad I did. The price difference was marginal and the top notch customer support from ECE was well worth the couple of extra $. __________________ 72 Cheyenne Super 1/2 LWB White/Dark Yellow 07 Avalanche 2LT 74 Sleek Craft Rebel Jet Boat W/Pontiac 400 Last edited by OhOneWS6; 01-03-2011 at 11:30 PM.

01-04-2011, 11:26 AM	#6
alsriv2 Registered User Join Date: Sep 2010 Location: Formerly MD and San Diego, now loving life in Arizona Posts: 1,636	Re: Front end rebuild kit? Has anyone looked at Kanter Auto Parts? A few years ago I did a front end overhaul on another US built 1978 truck front end and had excellent results with all the parts purchased. I have a '69 GMC 2500 and a '69 Chevy C10 that I will be rebuilding the fronts on soon and will try them first based on my experience. I do not think they sell modified parts for lowering etc, but it might be good to check them out. On a side note, Thanks for the advice about MOOG parts, I have not tried that route, but will be sure to try them. AL '69 GMC Longhorn "69 Chevy CST 396

01-04-2011, 11:47 AM	#7
marcsRX 68 C10 SWB Join Date: Nov 2009 Location: Chicago Posts: 216	Re: Front end rebuild kit? I got the ECE rebuild kit, all MOOG, just haven't had the time to put it all in yet... __________________ "How much physical pain do you go through on a daily basis that you can directly attribute to your lack of intelligence?" -R0bman

01-03-2011, 09:29 PM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Front end rebuild kit? Where are you getting the best front end rebuild kit from? I see LMC has a decent looking one for about $450. Any better quality priced ones to look at? __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

01-04-2011, 12:17 PM	#8
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Front end rebuild kit? i like to shop at my local stores for common readily available stuff like that __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 01-04-2011 at 12:18 PM.

01-04-2011, 12:41 PM	#9
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Front end rebuild kit? I just priced all Moog parts at Oreiley's and it was over $660, I got all the same from Rockauto for $440 including shipping. You have to wait for it, but for $220, I'll wait!

01-04-2011, 02:37 PM	#10
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: Front end rebuild kit? I used the ECE rebuilt kit, I also priced mine through LMC and also Oreilly, ECE was cheaper and They were all Moog parts. I rebuilt my front and it is night and day difference. You get what you pay for, I would NOT buy anything but Moog front end parts. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-04-2011, 04:05 PM	#11
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Front end rebuild kit? I purchased the CPP kit but have not put it in yet? __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

01-04-2011, 04:59 PM	#12
Jack_71C10 Shortbed club member Join Date: Jan 2008 Location: Halethorpe, MD Posts: 439	Re: Front end rebuild kit? my kit from CPP, ended up being all Tiawan parts. I was a little disapointed. __________________ 71 custom/10 6.0/4L80E SWB ece 4/6 72 custom camper 350/3 spd 2020 Chevy Express 3500 2023 Hyundai Tuscon 1986 GMC 3500 Bucket Truck Sent from my Rotary Phone via 14.4kb/s modem.

01-04-2011, 05:02 PM	#13
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Front end rebuild kit? Steering,brakes and suspension are too important to skimp on.I like Moog or TRW for all that stuff.I also don't much enjoy suspension work so I don't want to do it over. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-04-2011, 05:38 PM	#14
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Front end rebuild kit? What is TRW? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-04-2011, 06:20 PM	#17
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: Front end rebuild kit? try this one...but it says they supply Vehicle Manufacturers, I would go Moog! http://www.trw.com/ __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 01-04-2011 at 06:21 PM.

01-04-2011, 06:24 PM	#18
peglegs Registered User Join Date: Jul 2009 Location: grants pass, oregon Posts: 390	Re: Front end rebuild kit? clyde i think these sites r company/product info not a site to purchase __________________ 1990 chevy 4x4 with a 1940 IHC body



Register or Log In To remove these advertisements.

01-04-2011, 06:24 PM	#19
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: Front end rebuild kit? I bought all my front end stuff at Star Auto. Partsmaster is their store brand. Made in USA. Identical to Moog in every way, same exact thing. I compared them side-by-side. 1/3 the cost __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

01-04-2011, 07:09 PM	#20
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: Front end rebuild kit? I agree pegleggs, I was just clarifying for someone else. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-04-2011, 07:12 PM	#21
Flatbed136 Registered User Join Date: Dec 2010 Location: Jesup,Iowa Posts: 45	Re: Front end rebuild kit? Good Info! I'm looking at rebuilding mine sometime. Thanks

01-04-2011, 07:51 PM	#22
bajaracing Registered User Join Date: Dec 2009 Location: SoCAL Posts: 121	Re: Front end rebuild kit? try http://www.classicperform.com/6092chevtrk.htm#11

01-05-2011, 03:15 AM	#23
peglegs Registered User Join Date: Jul 2009 Location: grants pass, oregon Posts: 390	Re: Front end rebuild kit? sorry clyde i missed that one. __________________ 1990 chevy 4x4 with a 1940 IHC body

01-05-2011, 08:39 AM	#24
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Front end rebuild kit? Moog... for my next rebuild. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.