75 3/4 Ton 4X4 Frame & Axles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stlaser · 03-10-2003, 10:18 PM

Stripped '75 3/4 Ton Chevy Frame and axles Front is Dana 44 and Rear is Corporate 14 with stock posi. I believe they have 3.73 or 4.11. Make offer front end needs rebuilt.

BIGCHEVYMAN1 · 03-12-2003, 08:31 PM

any cracks near the steering gear box? where are you located?what gear ratio are they? j.c.

stlaser · 03-12-2003, 09:03 PM

There are no cracks near the steering box this frame is solid. If I had to guess I would say it was 4.11 it has been a year or so since I worked on this. The frame is in Fort Wayne, IN. I personally live forty minutes north of where it is.

03-10-2003, 10:18 PM	#1
stlaser Fabricator Join Date: Mar 2003 Location: Indiana Posts: 156	75 3/4 Ton 4X4 Frame & Axles Stripped '75 3/4 Ton Chevy Frame and axles Front is Dana 44 and Rear is Corporate 14 with stock posi. I believe they have 3.73 or 4.11. Make offer front end needs rebuilt.

03-12-2003, 08:31 PM	#2
BIGCHEVYMAN1 Registered User Join Date: Sep 2002 Location: portland tennessee Posts: 36	frame any cracks near the steering gear box? where are you located?what gear ratio are they? j.c.

03-12-2003, 09:03 PM	#3
stlaser Fabricator Join Date: Mar 2003 Location: Indiana Posts: 156	no cracks 4.11 There are no cracks near the steering box this frame is solid. If I had to guess I would say it was 4.11 it has been a year or so since I worked on this. The frame is in Fort Wayne, IN. I personally live forty minutes north of where it is. __________________ 84 C30 Chassis 60 & 14, 454/400/NP205 Retroing 98 X-tended Cab Built with the blood and sweat from the hands of a Chevy man.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.