73 brake banjo bolt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 01-13-2011, 01:34 PM

can anyone tell me where to get one? local auto parts stores say they dont have them. dealer says i have to know the size, they dont have a specific one...go figure

unless aomeone can tell me the size i can try to match one at the dealer..

edit - its the front bolt that holds the hose to the caliper..front brakes
Posted via Mobile Device

**lolife99** · 01-13-2011, 03:07 PM

The early calipers (73-78?) are 7/16"-20.
http://www.speedwaymotors.com/Produc...-2922&deptId=0

The later calipers (79-87) are metric 10mm.

Don't forget the crush washers.
2 per hose.
http://www.speedwaymotors.com/Produc...-3513&deptId=0

russgt · 01-13-2011, 05:41 PM

russgt · 01-13-2011, 05:43 PM

Most auto parts stores should have them in the generic brake part area, for some reason when you punch in your make to their computers it dosent come up.

Not sure if this is the exact one but
http://www.napaonline.com/Search/Det...698_0307632794

one low c10 · 01-13-2011, 05:53 PM

Autozone sells them, have them pull a caliper off the shelf to check the size while your there. They are not listed in the computer though. The keep them in the back.
Posted via Mobile Device

**lolife99** · 01-13-2011, 06:56 PM

Quote:

Originally Posted by kev2809

can anyone tell me where to get one? local auto parts stores say they dont have them. dealer says i have to know the size, they dont have a specific one...go figure

unless aomeone can tell me the size i can try to match one at the dealer..

edit - its the front bolt that holds the hose to the caliper..front brakes
Posted via Mobile Device

With all this running around,... does this make a "kit" disc brake conversion look a little better?
When we did 72BlckButy's disc brake conversion,... I think everything came in those boxes from ECE.

**kev2809** · 01-13-2011, 09:10 PM

^^^ lol. i give myself room for error since this is my first build ever. but that sure sounds like a good plan on the next build. this is what happens when your eager to work on your truck with no money lol. so you buy one little part at a time until it comes together.

and i called the dealer on the bolt, they said they didnt have em (remember, they told me they do have them but need the size...yesterday). so i went back to o reilly and checked with the correct size from lolife99, took them home and tried it out. BINGO!

so i dont know what the hell the parts guy was screwing the bolt into, but it worked on my calipers...

BIG V · 01-14-2011, 12:13 AM

Really... someone didn't know what a banjo bolt was?? i would have said it's the bolt that goes thru the banjo fitting..

01-13-2011, 01:34 PM	#1
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,140	73 brake banjo bolt can anyone tell me where to get one? local auto parts stores say they dont have them. dealer says i have to know the size, they dont have a specific one...go figure unless aomeone can tell me the size i can try to match one at the dealer.. edit - its the front bolt that holds the hose to the caliper..front brakes Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-13-2011 at 01:36 PM.

01-13-2011, 03:07 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: 73 brake banjo bolt The early calipers (73-78?) are 7/16"-20. http://www.speedwaymotors.com/Produc...-2922&deptId=0 The later calipers (79-87) are metric 10mm. Don't forget the crush washers. 2 per hose. http://www.speedwaymotors.com/Produc...-3513&deptId=0 __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 01-13-2011 at 03:13 PM.

01-13-2011, 05:41 PM	#3
russgt Registered User Join Date: May 2008 Location: Waukesha, WI Posts: 904	Re: 73 brake banjo bolt next __________________ 70 stepside 76 blazer 86 Silverado 20 Max Trailering 6.2 Crew 71 Nova SS My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=363634 Last edited by russgt; 01-13-2011 at 05:45 PM.

01-13-2011, 05:43 PM	#4
russgt Registered User Join Date: May 2008 Location: Waukesha, WI Posts: 904	Re: 73 brake banjo bolt Most auto parts stores should have them in the generic brake part area, for some reason when you punch in your make to their computers it dosent come up. Not sure if this is the exact one but http://www.napaonline.com/Search/Det...698_0307632794 __________________ 70 stepside 76 blazer 86 Silverado 20 Max Trailering 6.2 Crew 71 Nova SS My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=363634

01-13-2011, 05:53 PM	#5
one low c10 Registered User Join Date: Sep 2010 Location: Toledo, Ohio Posts: 106	Re: 73 brake banjo bolt Autozone sells them, have them pull a caliper off the shelf to check the size while your there. They are not listed in the computer though. The keep them in the back. Posted via Mobile Device

01-13-2011, 09:10 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,140	Re: 73 brake banjo bolt ^^^ lol. i give myself room for error since this is my first build ever. but that sure sounds like a good plan on the next build. this is what happens when your eager to work on your truck with no money lol. so you buy one little part at a time until it comes together. and i called the dealer on the bolt, they said they didnt have em (remember, they told me they do have them but need the size...yesterday). so i went back to o reilly and checked with the correct size from lolife99, took them home and tried it out. BINGO! so i dont know what the hell the parts guy was screwing the bolt into, but it worked on my calipers... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-14-2011, 12:13 AM	#8
BIG V Registered User Join Date: Jul 2009 Location: Northern California Posts: 411	Re: 73 brake banjo bolt Really... someone didn't know what a banjo bolt was?? i would have said it's the bolt that goes thru the banjo fitting.. __________________ 1991 Chevy suburban 3/4 ton 4x 4:56 and pulls great 1979 Chevy 1/2 ton long bed diesel 1974 Chevy crew cab short bed 3/4 ton 4x4 project 1991 Chevy suburban 2wd 1984 Chevy suburban 3/4 ton 4x 6.5 detroit with turbo 1961 Chevy pickup 1/2 ton 2wd 1975 gmc crew cab short bed 2wd



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.