Bit the bullet... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

manimal · 01-17-2011, 12:18 AM

and registered my 77 Silverado. I had it for sale and didn't have any bites, so I decided to shell out the cash and make it mine! No I just have to come up with an intake (non-egr) and a left side exhaust manifold w/A.I.R. tubes. Then I can put it back together! Here are the pics of the truck.

1BadSS · 01-17-2011, 02:03 AM

Cool!!! I remember you talking about wanting to scrap / sell the truck. It's too nice to get rid of. Plus, if I recall correctly, the price was free right?

manimal · 01-17-2011, 11:19 AM

Yeah, I was very frustrated with the whole thing.But after some serious thought,I paid the fees. And 'sides, like you said it was free.

terryj · 01-17-2011, 11:54 AM

Free isn't a bad price, invest a few dollars and you'll have a nice ride.

rfmaster · 01-17-2011, 11:58 AM

Quote:

Originally Posted by manimal

and registered my 77 Silverado. I had it for sale and didn't have any bites, so I decided to shell out the cash and make it mine! No I just have to come up with an intake (non-egr) and a left side exhaust manifold w/A.I.R. tubes. Then I can put it back together! Here are the pics of the truck.

Just about any SBC AIR tube setup should work. Even OE exhaust manifolds of 3rd gen camaro will work. Replace check valves as springs go bad with age.

//RF

manimal · 01-18-2011, 01:04 AM

Thanks RF. I will be hittin the wrecking yards this weekend.

Pop's C-10 · 01-18-2011, 01:11 AM

Good going man..glan to see you stayin n tha fight.

manimal · 01-18-2011, 09:29 PM

Thanks. I seem to lose motivation too quickly these days....probably 'cause I dont see the light at the end of the tunnel anymore. So I hope to 'MAKE' myself push forward with this one.

**N2TRUX** · 01-18-2011, 09:42 PM

Spend a couple days sanding it as smooth as possible, and get a good coat of primer on it. Being one solid color will make a huge difference in looks. Maybe a set of late model factory wheels and caps to give it a more aggressive look.

Fixwhataintbroke · 01-19-2011, 02:11 AM

looks pretty great from the pics you have up there

manimal · 02-02-2011, 06:59 PM

Headin to the wrecking yard this weekend to see if I can find some parts I need. The I am gonna pull the engine out,freshen it up,paint and reinstall. Hopefully all goes well. Maybe I'll be driven 'er in a couple of weeks.

engineco713 · 02-02-2011, 07:13 PM

Quote:

Originally Posted by manimal

and registered my 77 Silverado. I had it for sale and didn't have any bites, so I decided to shell out the cash and make it mine! No I just have to come up with an intake (non-egr) and a left side exhaust manifold w/A.I.R. tubes. Then I can put it back together! Here are the pics of the truck.

Looks better then what I'm starting out with!!!

manimal · 02-03-2011, 12:55 AM

I eventually want to put a 4spd granny in it(SM465).

01-17-2011, 12:18 AM	#1
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Bit the bullet... and registered my 77 Silverado. I had it for sale and didn't have any bites, so I decided to shell out the cash and make it mine! No I just have to come up with an intake (non-egr) and a left side exhaust manifold w/A.I.R. tubes. Then I can put it back together! Here are the pics of the truck. Attached Images __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

01-17-2011, 02:03 AM	#2
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: Bit the bullet... Cool!!! I remember you talking about wanting to scrap / sell the truck. It's too nice to get rid of. Plus, if I recall correctly, the price was free right? __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

01-17-2011, 11:19 AM	#3
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Bit the bullet... Yeah, I was very frustrated with the whole thing.But after some serious thought,I paid the fees. And 'sides, like you said it was free. __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

01-17-2011, 11:54 AM	#4
terryj Registered User Join Date: Aug 2010 Location: Medford, Oregon Posts: 139	Re: Bit the bullet... Free isn't a bad price, invest a few dollars and you'll have a nice ride.

01-18-2011, 01:04 AM	#6
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Bit the bullet... Thanks RF. I will be hittin the wrecking yards this weekend. __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

01-18-2011, 01:11 AM	#7
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Bit the bullet... Good going man..glan to see you stayin n tha fight.

01-18-2011, 09:29 PM	#8
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Bit the bullet... Thanks. I seem to lose motivation too quickly these days....probably 'cause I dont see the light at the end of the tunnel anymore. So I hope to 'MAKE' myself push forward with this one. __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

01-18-2011, 09:42 PM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Bit the bullet... Spend a couple days sanding it as smooth as possible, and get a good coat of primer on it. Being one solid color will make a huge difference in looks. Maybe a set of late model factory wheels and caps to give it a more aggressive look. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-19-2011, 02:11 AM	#10
Fixwhataintbroke Enthusiast Join Date: Jun 2010 Location: Graham, Wa. Posts: 192	Re: Bit the bullet... looks pretty great from the pics you have up there __________________ - Cole 1979 Chevy C30 w/ carb 454. 1992 Chevy K1500 w/ tbi 350. Sold 1997 Dodge Ram 1500 w/ Magnum 360 Sold "Good judgment comes from experience. Experience comes from poor judgment." - George Washington

02-02-2011, 06:59 PM	#11
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Bit the bullet... Headin to the wrecking yard this weekend to see if I can find some parts I need. The I am gonna pull the engine out,freshen it up,paint and reinstall. Hopefully all goes well. Maybe I'll be driven 'er in a couple of weeks. __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

02-03-2011, 12:55 AM	#13
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Bit the bullet... I eventually want to put a 4spd granny in it(SM465). __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.