Tilt Column Install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sjarrett71 · 01-28-2011, 05:10 PM

Changing my non-tilt colum out with a tilt column. Are the spring and big washer that were on the lower shaft of my non-tilt column required on the tilt column?

cdowns · 01-28-2011, 05:23 PM

yes the spring and washer install just like the nontilt had when installing factory tilt

01-28-2011, 05:10 PM	#1
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Tilt Column Install Changing my non-tilt colum out with a tilt column. Are the spring and big washer that were on the lower shaft of my non-tilt column required on the tilt column? __________________ -Scott-

01-28-2011, 05:23 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Tilt Column Install yes the spring and washer install just like the nontilt had when installing factory tilt __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.