CA Original Shoulder Belts Male ends with boots - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70LonghornCST · 01-30-2011, 01:09 PM

I had picked these to build a second set of shoulder belts, but decided to sell them to fund other purchases. These are the male end with correct 67-71 style boots (vertical retaining dimple). They are not perfect, but are still pretty good. These used to be blue but have been colored black. They were also rewebbeb with black webbing, but it is the incorrect webbing. I was going to reweb them. As far as the female ends go, the standard female ends from regular lap belts are the same length. There is zero rust on the chrome. This is the perfect set to buy for those wanting to add shoulder belts. $100 shipped for the pair.

**davestrucks** · 01-30-2011, 01:10 PM

I''ll take them

*sharpie1972* · 01-30-2011, 01:11 PM

I'll take them. Thanks, Sharpie

*sharpie1972* · 01-30-2011, 01:11 PM

Dang! missed by seconds. Sharpie

**too much stuff** · 01-30-2011, 01:11 PM

You must have cold fingers sharpie...

70LonghornCST · 01-30-2011, 01:12 PM

Whoa, one and two minute responses. PM sent to davestrucks. Sharpie is second.

*sharpie1972* · 01-30-2011, 01:12 PM

No, just a little slow after a rigorous game of beer pong last night! Sharpie

**davestrucks** · 01-30-2011, 01:21 PM

Payment Sent. Thanks !!!!!!!!!

*sharpie1972* · 01-30-2011, 01:23 PM

Quote:

Originally Posted by 70LonghornCST

Whoa, one and two minute responses. PM sent to davestrucks. Sharpie is second.

Great price on hard to find pieces! You wouldn't happen to have a shot of the attachment point under the covers for reference would you? Thanks, Sharpie

70LonghornCST · 01-30-2011, 01:26 PM

Paypal recieved. They'll ship tomorrow. Thanks.

70LonghornCST · 01-30-2011, 01:32 PM

Quote:

Originally Posted by sharpie1972

Great price on hard to find pieces! You wouldn't happen to have a shot of the attachment point under the covers for reference would you? Thanks, Sharpie

Sharpie,
Here's a picture. You know, the middle male belt from a car from the same era has a similar end. It has a couple of slight bends to it that can be straightend and would work just as well.

*sharpie1972* · 01-30-2011, 01:36 PM

Hi Richard, thanks for the pic. I was thinking the same thing about a car belt. Congrats on the NOS caps by the way. Sharpie

**leddzepp** · 01-30-2011, 01:37 PM

Here is a pic showing the order in which everything attaches. The rubber tab on the inside of the boot keeps the bolt/mounting tab from scratching the pillar.

*sharpie1972* · 01-30-2011, 01:38 PM

Quote:

Originally Posted by leddzepp

Here is a pic showing the order in which everything attaches. The rubber tab on the inside of the boot keeps the bolt/mounting tab from scratching the pillar.

Helpful shot as well. Same bolt as used on the floor? Sharpie

**leddzepp** · 01-30-2011, 01:45 PM

Quote:

Originally Posted by sharpie1972

Helpful shot as well. Same bolt as used on the floor? Sharpie

I believe the bolt is a different size...I do not recall off the top of my head what it is though

**71blksuper4x4** · 01-30-2011, 01:51 PM

Good score on the boots. Hard to find. Trevor

70LonghornCST · 01-30-2011, 01:55 PM

Quote:

Originally Posted by sharpie1972

...Congrats on the NOS caps by the way. Sharpie

Thanks, Sharpie. Hence, the only reason that I am selling them. One rare part for another I guess

sameyrasmea72 · 01-30-2011, 03:06 PM

[QUOTE=sharpie1972;4449340. Same bolt as used on the floor? Sharpie[/QUOTE]

The bolt from a 67 floor seat belt will work. The length may be a tad different , but the threads are the same.

70LonghornCST · 02-01-2011, 12:33 AM

Dave, your belts shipped today via Priority Mail. So, how many sets of shoulder belts does this make for you? Enjoy!

**Classic Bowties** · 02-01-2011, 12:55 AM

Quote:

Originally Posted by 70LonghornCST

So, how many sets of shoulder belts does this make for you? Enjoy!

Hey Richard, after seeing/finding out who won the NOS 3/4 ton blue bowtie cap set, I now realize who beat me out by one bid on the NOS black shoulder harness a few weeks ago.

Great purchase there buddy, I have a single black NOS shoulder harness in the same GM accessory box with matching part number and date code tag that is now still looking for it's mate. Mel

**Classic Bowties** · 02-01-2011, 01:09 AM

Quote:

Originally Posted by Classic Bowties

I have a single black NOS shoulder harness in the same GM accessory box with matching part number and date code tag that is now still looking for it's mate. Mel

Since this thread is finished... Regarding the above quote , would you want another matching NOS in the box stainless 3/4 ton blue bowtie cap to have as a spare? I would trade ya the nos cap straight across for that NOS black shoulder belt Pn. 994173, you know the one

. Mel

70LonghornCST · 02-01-2011, 01:29 AM

Sorry, Mel. It took me a good year or so to even see a black NOS shoulder surface since I got my first one from Harry Huda. While I'd love to have a spare cap, I'd rather part with my ___insert noun here___ before that belt.

If it's any consolation, I can't think of any other NOS part that I will need for my build, so you wont have to worry about any atomic last minute bids on your future bids from me.

**davestrucks** · 02-01-2011, 12:24 PM

Richard, 4 1/2 sets.

**Classic Bowties** · 02-04-2011, 12:42 AM

Quote:

Originally Posted by 70LonghornCST

Sorry, Mel. It took me a good year or so to even see a black NOS shoulder surface since I got my first one from Harry Huda. While I'd love to have a spare cap, I'd rather part with my ___insert noun here___ before that belt.

Richard, if for any reason you should change your mind, in the below linked thread-post #18 there is a picture of your spare NOS 3/4 ton cap. Mel

Thread link: http://67-72chevytrucks.com/vboard/s...d.php?t=444073

01-30-2011, 01:10 PM	#2
davestrucks Senior Member Join Date: Dec 2008 Location: Northglenn Co Posts: 622	Re: Original Shoulder Belts Male ends with boots I''ll take them

01-30-2011, 01:11 PM	#3
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Original Shoulder Belts Male ends with boots I'll take them. Thanks, Sharpie

01-30-2011, 01:11 PM	#4
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Original Shoulder Belts Male ends with boots Dang! missed by seconds. Sharpie

01-30-2011, 01:11 PM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: Original Shoulder Belts Male ends with boots You must have cold fingers sharpie... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-30-2011, 01:12 PM	#6
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Original Shoulder Belts Male ends with boots Whoa, one and two minute responses. PM sent to davestrucks. Sharpie is second. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

01-30-2011, 01:09 PM	#1
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Original Shoulder Belts Male ends with boots I had picked these to build a second set of shoulder belts, but decided to sell them to fund other purchases. These are the male end with correct 67-71 style boots (vertical retaining dimple). They are not perfect, but are still pretty good. These used to be blue but have been colored black. They were also rewebbeb with black webbing, but it is the incorrect webbing. I was going to reweb them. As far as the female ends go, the standard female ends from regular lap belts are the same length. There is zero rust on the chrome. This is the perfect set to buy for those wanting to add shoulder belts. $100 shipped for the pair. Attached Images __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 01-30-2011 at 01:10 PM. Reason: spelling

01-30-2011, 01:21 PM	#8
davestrucks Senior Member Join Date: Dec 2008 Location: Northglenn Co Posts: 622	Re: Original Shoulder Belts Male ends with boots Payment Sent. Thanks !!!!!!!!!

01-30-2011, 01:26 PM	#10
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Original Shoulder Belts Male ends with boots Paypal recieved. They'll ship tomorrow. Thanks. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

01-30-2011, 01:36 PM	#12
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Original Shoulder Belts Male ends with boots Hi Richard, thanks for the pic. I was thinking the same thing about a car belt. Congrats on the NOS caps by the way. Sharpie

01-30-2011, 01:37 PM	#13
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Original Shoulder Belts Male ends with boots Here is a pic showing the order in which everything attaches. The rubber tab on the inside of the boot keeps the bolt/mounting tab from scratching the pillar. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul Last edited by leddzepp; 01-30-2011 at 01:37 PM.

01-30-2011, 01:51 PM	#16
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Original Shoulder Belts Male ends with boots Good score on the boots. Hard to find. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-30-2011, 03:06 PM	#18
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: Original Shoulder Belts Male ends with boots [QUOTE=sharpie1972;4449340. Same bolt as used on the floor? Sharpie[/QUOTE] The bolt from a 67 floor seat belt will work. The length may be a tad different , but the threads are the same. __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

02-01-2011, 12:33 AM	#19
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Original Shoulder Belts Male ends with boots Dave, your belts shipped today via Priority Mail. So, how many sets of shoulder belts does this make for you? Enjoy! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

02-01-2011, 01:29 AM	#22
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Original Shoulder Belts Male ends with boots Sorry, Mel. It took me a good year or so to even see a black NOS shoulder surface since I got my first one from Harry Huda. While I'd love to have a spare cap, I'd rather part with my ___insert noun here___ before that belt. If it's any consolation, I can't think of any other NOS part that I will need for my build, so you wont have to worry about any atomic last minute bids on your future bids from me. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 02-01-2011 at 01:30 AM.

02-01-2011, 12:24 PM	#23
davestrucks Senior Member Join Date: Dec 2008 Location: Northglenn Co Posts: 622	Re: Original Shoulder Belts Male ends with boots Richard, 4 1/2 sets. Last edited by davestrucks; 02-01-2011 at 12:26 PM. Reason: add



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.