What a mess just look at this. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kabwe · 02-06-2011, 08:12 PM

Look at this mess
A tri5 buddy of mine asked me for the past three years if I could reinstall his nova clip on his AD truck because the truck dog tracks. The clip was done back in 1992 from what he tells me. I told him when he takes the front sheet metal off and pull the engine to call me and I will take a look.
Well, he finally did as I requested and man this thing is a mess I did not expect anything this bad. The clip is installed crooked, ugly, different thickness of metals it looks like the guy that installed it used whatever was in the backyard. Anyway it has to be fixed so here are some pictures of what I have to deal with I cannot believe he paid the guy who did this. Some people should not work on cars.

**truckdude239** · 02-06-2011, 08:14 PM

Wowwwwwwwwwwwwwwwwwwwwww!!!!!!!!!!!!!!!!!!!!!!!

**LEEVON** · 02-06-2011, 08:17 PM

Why do people feel the need to apply their absolute worst "engineering" to front clips and suspension? That's worth a swift kick in the nuts...

Kabwe · 02-06-2011, 08:29 PM

Quote:

Originally Posted by truckdude239

Wowwwwwwwwwwwwwwwwwwwwww!!!!!!!!!!!!!!!!!!!!!!!

That is exactly what I said when I saw it.lol Then a couple of curse words came after that.lol

Kabwe · 02-06-2011, 08:31 PM

Quote:

Originally Posted by LEEVON

Why do people feel the need to apply their absolute worst "engineering" to front clips and suspension? That's worth a swift kick in the nuts...

Yeah this guy needs something bigger than a kick in the nuts.lol But the word engineering and what's going on here should never be in the same sentence.lol The sad thing is my buddy who is an older gentlemen told me one day they were cruising and the guy that done the clip had the nerve to tell him that his truck was dog tracking. Well he did the clip. What a butthead he should have just said "I do not know how to install a clip properly look for some else".

Pop's C-10 · 02-06-2011, 08:34 PM

That is some hackin...

Kabwe · 02-06-2011, 08:42 PM

I’ve done a little work on the truck this weekend. I leveled the frame and built a jig so that I cut the clip out and get it ready for the re-install.

I cut all the ugly stuff off the subframe and then my camera broke before I could take a pic of the cleaned up subframe.lol It does not like looking at this either.lol I should be finished next week and I will post pics of what I do.

**Dan in Pasadena** · 02-06-2011, 08:43 PM

Eek!
It has all the 4 basic "food groups" covered: Icky, Yucky, Cruddy and Gross!

Good luck with that. Cut it off, throw it away, and start with an entirely new clip?

Kabwe · 02-06-2011, 08:55 PM

Quote:

Originally Posted by Pop's C-10

That is some hackin...

Who are you telling?lol It actually looks better in the pics than in person.lol Man this is unbelievable. I'm just wondering how many guys are riding around with clips like this because from what I know this guy has installed a lot of peoples clips in the Los Angeles area. Yuck.

Quote:

Originally Posted by Dan in Pasadena

Eek!
It has all the 4 basic "food groups" covered: Icky, Yucky, Cruddy and Gross!

Good luck with that. Cut it off, throw it away, and start with an entirely new clip?

LOL. I actually suggested to him that I just rebuild the frame rails and box everything and install an aftermarket IFS unit, but he wants the nova clip done correctly. I can do it no problem and it will look nice when I done, but it would have been easier to rebuild the frame rails. I already cut all that ugly stuff and its all setup for re-installation, but like I said my camera broke at the sight on this monstrosity.lol

BC Toy chest · 02-06-2011, 09:16 PM

Yep that's pretty bad. Well with all that extra metal to weigh it down, it probably road pretty smooth , hahaha

From one angle of your pictures I see three cross members. I am trying to understand what was the reasoning behind the madness. Now believe it or not on occassion you can walk into a mom & pop body shop and see this type of work.

Kabwe · 02-06-2011, 09:19 PM

Quote:

Originally Posted by BC Toy chest

Yep that's pretty bad. Well with all that extra metal to weigh it down, it probably road pretty smooth , hahaha

From one angle of your pictures I see three cross members. I am trying to understand what was the reasoning behind the madness. Now believe it or not on occassion you can walk into a mom & pop body shop and see this type of work.

I hope you never see this type of work anywhere let alone a shop. This goes to show you should not let just anyone work on your car. Get references man, get references.lol

Kim57 · 02-06-2011, 09:26 PM

That's just plain nasty looking.
Do post pics of your progress as it will help to show the right way to do things.
Kim

Kabwe · 02-06-2011, 09:56 PM

Quote:

Originally Posted by Kim57

That's just plain nasty looking.
Do post pics of your progress as it will help to show the right way to do things.
Kim

Yeah Kim this is a hot mess as my grandfather use to say.lol I will post pics of how I put it back together. Guys don't let just anybody work on your pride and joys. Like I said this is an older gentleman who trusted what he was told and as a result was taken advantage of. The guy who did this supposedly installed lots of clips and that's down right scary to think of people riding around with its crappy work under their trucks.

Russell Ashley · 02-06-2011, 10:03 PM

Was it the same guy who did that one that did the clip on Luckin Fou's panel? Looks like about the same quality level.

wwhijr · 02-06-2011, 10:05 PM

Holy Carp. That is lovely.

Kabwe · 02-06-2011, 10:11 PM

Quote:

Originally Posted by Russell Ashley

Was it the same guy who did that one that did the clip on Luckin Fou's panel? Looks like about the same quality level.

Russell when I saw it I thought the same thing. I called BCToyChest and told him to look at the Luckin Fou's thread so he would know what I was talking about. Look at the first couple of pics and notice that clip is not just crooked its also installed higher on the driver side.lol Pictures do not do this thing justice you have to see it in person to truly appreciated the Forrest Gump fabrication skills that it took to install this thing.

Quote:

Originally Posted by wwhijr

Holy Carp. That is lovely.

Holy crap is right, leave the lovely part out.lol

Kabwe · 02-06-2011, 10:31 PM

Hey BCTOYChest,

I forgot to tell you something before you got off the phone so I thought I would share it with the guys here because I laughed so hard. Another one of our buddies was over while I was working on this and I asked did he use a tape measure at all and he said yeah but I guess it was the kind that did not have any numbers.lol

**JML55** · 02-06-2011, 10:55 PM

I see the need of safety inspections in your part of the world. Here you need a safety inspection when your register and insure a vehicle for the road for the first time. Some other provinces have yearly inspections.

Kabwe · 02-06-2011, 11:01 PM

Quote:

Originally Posted by JML55

I see the need of safety inspections in your part of the world. Here you need a safety inspection when your register and insure a vehicle for the road for the first time. Some other provinces have yearly inspections.

This maybe true, but how would that help if someone was driving the truck and decided to install a clip over the weekend. The truck is already registered. I think its easier if people are a little more careful of who they let work on their truck. Also if someone gives you a price that is too good to be true you might end up with something like this.lol

wwhijr · 02-06-2011, 11:29 PM

You know the more I drink the better that looks.

Kabwe · 02-06-2011, 11:30 PM

Quote:

Originally Posted by wwhijr

You know the more I drink the better that looks.

Then you have a drinking problem my friend.lol

1lo67 · 02-06-2011, 11:39 PM

Quote:

Originally Posted by wwhijr

You know the more I drink the better that looks.

Quote:

Originally Posted by Kabwe

Then you have a drinking problem my friend.lol

LOL

bobinbc · 02-06-2011, 11:52 PM

Quote:

Originally Posted by Kabwe

I cut all the ugly stuff off the subframe and then my camera broke before I could take a pic of the cleaned up subframe.lol It does not like looking at this either.lol I should be finished next week and I will post pics of what I do.

sgtusmc · 02-07-2011, 12:52 AM

Come on man...it's not that bad. Some L brackets with angry welds is okay on the frontend.

bobinbc · 02-07-2011, 03:20 AM

You know, I thought I'd be funny and post some pics of worse hack jobs but after combing the net for an hour I came up empty, this is baaad.

02-06-2011, 08:12 PM	#1
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	What a mess just look at this. Look at this mess A tri5 buddy of mine asked me for the past three years if I could reinstall his nova clip on his AD truck because the truck dog tracks. The clip was done back in 1992 from what he tells me. I told him when he takes the front sheet metal off and pull the engine to call me and I will take a look. Well, he finally did as I requested and man this thing is a mess I did not expect anything this bad. The clip is installed crooked, ugly, different thickness of metals it looks like the guy that installed it used whatever was in the backyard. Anyway it has to be fixed so here are some pictures of what I have to deal with I cannot believe he paid the guy who did this. Some people should not work on cars. Last edited by Kabwe; 02-09-2011 at 09:10 PM.

02-06-2011, 08:14 PM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: What a mess just look at this. Wowwwwwwwwwwwwwwwwwwwwww!!!!!!!!!!!!!!!!!!!!!!! __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

02-06-2011, 08:17 PM	#3
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,893	Re: What a mess just look at this. Why do people feel the need to apply their absolute worst "engineering" to front clips and suspension? That's worth a swift kick in the nuts... __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids Last edited by LEEVON; 02-06-2011 at 08:18 PM.

02-06-2011, 08:34 PM	#6
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: What a mess just look at this. That is some hackin...

02-06-2011, 08:42 PM	#7
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: What a mess just look at this. I’ve done a little work on the truck this weekend. I leveled the frame and built a jig so that I cut the clip out and get it ready for the re-install. I cut all the ugly stuff off the subframe and then my camera broke before I could take a pic of the cleaned up subframe.lol It does not like looking at this either.lol I should be finished next week and I will post pics of what I do. Last edited by Kabwe; 02-06-2011 at 11:25 PM.

02-06-2011, 08:43 PM	#8
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,344	Re: What a mess just look at this. Eek! It has all the 4 basic "food groups" covered: Icky, Yucky, Cruddy and Gross! Good luck with that. Cut it off, throw it away, and start with an entirely new clip?

02-06-2011, 09:16 PM	#10
BC Toy chest Registered User Join Date: Nov 2010 Location: SoCal Posts: 914	Re: What a mess just look at this. Yep that's pretty bad. Well with all that extra metal to weigh it down, it probably road pretty smooth , hahaha From one angle of your pictures I see three cross members. I am trying to understand what was the reasoning behind the madness. Now believe it or not on occassion you can walk into a mom & pop body shop and see this type of work. __________________ *I'm not tail-gating, I'm drafting.* http://67-72chevytrucks.com/vboard/s...d.php?t=432758

02-06-2011, 09:26 PM	#12
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: What a mess just look at this. That's just plain nasty looking. Do post pics of your progress as it will help to show the right way to do things. Kim

02-06-2011, 10:03 PM	#14
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,648	Re: What a mess just look at this. Was it the same guy who did that one that did the clip on Luckin Fou's panel? Looks like about the same quality level.

02-06-2011, 10:05 PM	#15
wwhijr SUPERscrapMAN Join Date: Mar 2004 Location: Crouse, NC Posts: 326	Re: What a mess just look at this. Holy Carp. That is lovely. __________________ Christine 1987 Chevy S10 2.8l 5 speed 600k miles! still chugging along - wifes ride Old Smokey 1990 Chevy K1500 Suburban 6.2L Diesel - Banks sidewinder The WarBeast 1994 Chevy Suburban K1500 - Semi retired at 400K miles The BLueOx 1994 Chevy Suburban. K2500 454 Used on a daily basis.

02-06-2011, 10:31 PM	#17
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: What a mess just look at this. Hey BCTOYChest, I forgot to tell you something before you got off the phone so I thought I would share it with the guys here because I laughed so hard. Another one of our buddies was over while I was working on this and I asked did he use a tape measure at all and he said yeah but I guess it was the kind that did not have any numbers.lol Last edited by Kabwe; 02-06-2011 at 10:49 PM.

02-06-2011, 10:55 PM	#18
JML55 Senior Member Join Date: Nov 2008 Location: Fannystelle, Manitoba, Canada Posts: 853	Re: What a mess just look at this. I see the need of safety inspections in your part of the world. Here you need a safety inspection when your register and insure a vehicle for the road for the first time. Some other provinces have yearly inspections. __________________ Jean-Marc Lacasse 57 GMC 55 GMC 55 Belair 99 S10 http://67-72chevytrucks.com/vboard/s...d.php?t=316140 http://67-72chevytrucks.com/vboard/s...d.php?t=806011

02-06-2011, 11:29 PM	#20
wwhijr SUPERscrapMAN Join Date: Mar 2004 Location: Crouse, NC Posts: 326	Re: What a mess just look at this. You know the more I drink the better that looks. __________________ Christine 1987 Chevy S10 2.8l 5 speed 600k miles! still chugging along - wifes ride Old Smokey 1990 Chevy K1500 Suburban 6.2L Diesel - Banks sidewinder The WarBeast 1994 Chevy Suburban K1500 - Semi retired at 400K miles The BLueOx 1994 Chevy Suburban. K2500 454 Used on a daily basis.

02-07-2011, 12:52 AM	#24
sgtusmc Registered User Join Date: Mar 2008 Location: Cali. Posts: 958	Re: What a mess just look at this. Come on man...it's not that bad. Some L brackets with angry welds is okay on the frontend. __________________ My build, 53 GMC / S10 swap http://67-72chevytrucks.com/vboard/s...d.php?t=305723 My build, 59 Chevy / 88 fullsize swap http://67-72chevytrucks.com/vboard/s...hlight=sgtusmc U.S. Marines - Certified Counselors to the 72 Virgins Dating Club.

02-07-2011, 03:20 AM	#25
bobinbc Registered User Join Date: Mar 2009 Location: Vancouver Island, Courtenay B.C. CANADA Posts: 578	Re: What a mess just look at this. You know, I thought I'd be funny and post some pics of worse hack jobs but after combing the net for an hour I came up empty, this is baaad. __________________ 1962 Chevy blue SBFS 1957 Chevy yellow SBSS 1956 GMC red SBSS Nov 2017 ToTM https://www.facebook.com/groups/Cana...geChevyTrucks/ Last edited by bobinbc; 02-07-2011 at 03:23 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.