Want a rendering for my bagged 64 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mad Rods · 02-08-2011, 10:32 PM

Who does renderings here? I want one and would pay for a professional type if I could get one. I need more motivation in my build. I also want to set on my dash at local car shows. Under construction as of now. Any info will be greatly appreciated guys..... Thanks!!!!!
Posted via Mobile Device

kart34 · 02-08-2011, 11:02 PM

Carter Hickman Designs He did a great job for me

jimmydean · 02-08-2011, 11:16 PM

http://67-72chevytrucks.com/vboard/f...splay.php?f=33

**Captainfab** · 02-09-2011, 02:17 AM

Here is another guy......

http://www.67-72chevytrucks.com/vboa...d.php?t=401417

Hickup pickup · 02-09-2011, 11:23 AM

Joel is great, his renderings are large and look top notch framed, his prices are great and he can even have them framed for you, sends a pre sketch and is open to changes. These he did for me. Oh yea, he's pretty fast too! http://1320designs.com/blog1/

jimmydean · 02-09-2011, 11:54 AM

Quote:

Originally Posted by kart34

Carter Hickman Designs He did a great job for me

The ones of your truck are the best I've seen. Seriously solid work, I might have some done of mine after seeing yours.

smilts60 · 02-09-2011, 12:00 PM

This is exactly what I need. Im one of those few guys who read the instructions. So it would be great to have a guide of my very own for what I want to do.

Mad Rods · 02-09-2011, 12:53 PM

Damn hickup... Those are sick!!!!!' karts renderings are sweet too!!
Posted via Mobile Device

Mad Rods · 02-09-2011, 12:54 PM

I'm gonna try and make some phone calls after work today!!
Posted via Mobile Device

Mad Rods · 02-09-2011, 02:28 PM

Does anyone know about how much one cost?
Posted via Mobile Device

Flame Broiled · 02-10-2011, 07:43 PM

Lots of great artists out there. I have enjoyed and recomend the service that I have recieved from this artist.

http://www.eyekandydesigns.com/rende..._1965_C-10.jpg

http://www.eyekandydesigns.com/Renderings.html

Tell him Aaron sent you....

**N2TRUX** · 02-10-2011, 09:53 PM

Quote:

Originally Posted by Captainfab

Here is another guy......

http://www.67-72chevytrucks.com/vboa...d.php?t=401417

Carter Hickman does great work. So good that its almost impossible to get on his client list.

Joseph Durant (jdurant) uses a different media format, but the end result is awesome. He starts with a real photo of your truck, or one like your if necessary. From there he transforms it in to a rendering to fit your needs.

MalibuKasey · 02-10-2011, 10:30 PM

Heres what I sent to your email....
As for pricing... Every artist or firm charges different rates. Ive charged anywhere from $200 all the way up to $800(for freelance) however at work when we do it for the race teams we charge a minimum of $1500.... depends on what you want and the level of reference material you supply. If you have good photos to work from then you make the artist's life ALOT easier and I think the price reflects that.

erock805 · 02-11-2011, 04:08 AM

Joel at 1320 designs can give you a couple of options. He can do a computer rendering which takes a bunch of time or the hand drawn version you see on Hicups and mine.

BTW...Joel actually painted the my truck as well. Way cool guy and is resonablly priced. Here is a crappy cell phone pic of mine.

jdurant · 02-12-2011, 11:08 PM

Hey. I was pointed to this thread by a fellow board member. Just wanted to post some recent works. Here are some trucks that I had handy.

This is what I am currently working on. A patina'd 83 for board member Stitch. I did his logo too. Gonna add a few more views, including a pretty custom interior. While I had it broken down that way, formatted this single view to use for a signature.

There are some more I wish I could post, but I get sworn to secrecy sometimes. I would love to add some 60-66s to my portfolio.
My prices are typically $150 for a single view, and $100 for additional views. Like anything else, if there is something super wild and custom--well, the more time spent the more I have to charge. From comparing, my prices are fairly typical, if you could say such a thing. I like to think slightly on the low end of the spectrum. And for the record, I could do it by hand in a few different media, (heck, I could cast a bronze if somebody wanted to pay for it) but I'm kinda proud of my more traditional stuff, and truthfully haven't done much cars of any sort. Honestly, I've always tried to keep the two seperate. I'm getting off topic, but notice the the name is gold too, ...right now.
But, whatever route you decide, I think renderings are a great couple hundred bucks spent. They can really help with some tough decisions, and prevent expensive mistakes in some cases.
Oh, and guys who recommended me...much appreciated.

02-08-2011, 10:32 PM	#1
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Want a rendering for my bagged 64 c10 Who does renderings here? I want one and would pay for a professional type if I could get one. I need more motivation in my build. I also want to set on my dash at local car shows. Under construction as of now. Any info will be greatly appreciated guys..... Thanks!!!!! Posted via Mobile Device __________________ Chevy Only Tx.........

02-08-2011, 11:02 PM	#2
kart34 Registered User Join Date: Jul 2009 Location: Blooming Prairie, Minnesota Posts: 673	Re: Want a rendering for my bagged 64 c10 Carter Hickman Designs He did a great job for me

02-08-2011, 11:16 PM	#3
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Want a rendering for my bagged 64 c10 http://67-72chevytrucks.com/vboard/f...splay.php?f=33 __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

02-09-2011, 02:17 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Want a rendering for my bagged 64 c10 Here is another guy...... http://www.67-72chevytrucks.com/vboa...d.php?t=401417 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-09-2011, 11:23 AM	#5
Hickup pickup Registered User Join Date: Dec 2008 Location: Gilbert , Az Posts: 369	Re: Want a rendering for my bagged 64 c10 Joel is great, his renderings are large and look top notch framed, his prices are great and he can even have them framed for you, sends a pre sketch and is open to changes. These he did for me. Oh yea, he's pretty fast too! http://1320designs.com/blog1/ Attached Images __________________ 2-20, 2-21 whatever it takes! Last edited by Hickup pickup; 02-09-2011 at 11:24 AM.

02-09-2011, 12:00 PM	#7
smilts60 Registered User Join Date: Jan 2011 Location: Big Spring Tx Posts: 127	Re: Want a rendering for my bagged 64 c10 This is exactly what I need. Im one of those few guys who read the instructions. So it would be great to have a guide of my very own for what I want to do.

02-09-2011, 12:53 PM	#8
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: Want a rendering for my bagged 64 c10 Damn hickup... Those are sick!!!!!' karts renderings are sweet too!! Posted via Mobile Device __________________ Chevy Only Tx.........

02-09-2011, 12:54 PM	#9
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: Want a rendering for my bagged 64 c10 I'm gonna try and make some phone calls after work today!! Posted via Mobile Device __________________ Chevy Only Tx.........

02-09-2011, 02:28 PM	#10
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: Want a rendering for my bagged 64 c10 Does anyone know about how much one cost? Posted via Mobile Device __________________ Chevy Only Tx.........

02-10-2011, 07:43 PM	#11
Flame Broiled Registered User Join Date: Jul 2010 Location: Delta BC Posts: 68	Re: Want a rendering for my bagged 64 c10 Lots of great artists out there. I have enjoyed and recomend the service that I have recieved from this artist. http://www.eyekandydesigns.com/rende..._1965_C-10.jpg http://www.eyekandydesigns.com/Renderings.html Tell him Aaron sent you.... Last edited by Flame Broiled; 02-10-2011 at 07:44 PM.

02-10-2011, 10:30 PM	#13
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: Want a rendering for my bagged 64 c10 Heres what I sent to your email.... As for pricing... Every artist or firm charges different rates. Ive charged anywhere from $200 all the way up to $800(for freelance) however at work when we do it for the race teams we charge a minimum of $1500.... depends on what you want and the level of reference material you supply. If you have good photos to work from then you make the artist's life ALOT easier and I think the price reflects that. Attached Images __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

02-11-2011, 04:08 AM	#14
erock805 Registered User Join Date: Apr 2007 Location: gilbert, az Posts: 392	Re: Want a rendering for my bagged 64 c10 Joel at 1320 designs can give you a couple of options. He can do a computer rendering which takes a bunch of time or the hand drawn version you see on Hicups and mine. BTW...Joel actually painted the my truck as well. Way cool guy and is resonablly priced. Here is a crappy cell phone pic of mine. Attached Images __________________ "Do what you want to the girl, but leave me alone!"

02-12-2011, 11:08 PM	#15
jdurant Senior Member Join Date: Dec 2007 Location: Houston, Texas Posts: 679	Re: Want a rendering for my bagged 64 c10 Hey. I was pointed to this thread by a fellow board member. Just wanted to post some recent works. Here are some trucks that I had handy. This is what I am currently working on. A patina'd 83 for board member Stitch. I did his logo too. Gonna add a few more views, including a pretty custom interior. While I had it broken down that way, formatted this single view to use for a signature. There are some more I wish I could post, but I get sworn to secrecy sometimes. I would love to add some 60-66s to my portfolio. My prices are typically $150 for a single view, and $100 for additional views. Like anything else, if there is something super wild and custom--well, the more time spent the more I have to charge. From comparing, my prices are fairly typical, if you could say such a thing. I like to think slightly on the low end of the spectrum. And for the record, I could do it by hand in a few different media, (heck, I could cast a bronze if somebody wanted to pay for it) but I'm kinda proud of my more traditional stuff, and truthfully haven't done much cars of any sort. Honestly, I've always tried to keep the two seperate. I'm getting off topic, but notice the the name is gold too, ...right now. But, whatever route you decide, I think renderings are a great couple hundred bucks spent. They can really help with some tough decisions, and prevent expensive mistakes in some cases. Oh, and guys who recommended me...much appreciated. __________________ Joseph 87 Turbo Buick 92 5.0 Mustang coupe 87 GMC Sierra SWB 82 Chevy K5 Blazer 2wd Last edited by jdurant; 02-12-2011 at 11:53 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.