difficult to make a clock work in a non-clock cluster? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

erikgto · 02-09-2011, 05:49 PM

Is it easy of difficult to put a factory clock in the lower left corner spot of a gauge cluster that didn't come from the factory with a clock?

My cluster is all busted up and the printed circuit is damaged.
Only thing working is the speedo and the clock!!!

If I buy one of the stock gauge clusters without a clock, how difficult will it be to get my clock to work in there?

RandyP · 02-09-2011, 06:08 PM

I added a clock to mine, not a big issue at all. Basically a hot wire (always hot) and a ground, easy stuff.

02-09-2011, 05:49 PM	#1
erikgto Registered User Join Date: May 2007 Location: The Netherlands Posts: 185	difficult to make a clock work in a non-clock cluster? Is it easy of difficult to put a factory clock in the lower left corner spot of a gauge cluster that didn't come from the factory with a clock? My cluster is all busted up and the printed circuit is damaged. Only thing working is the speedo and the clock!!! If I buy one of the stock gauge clusters without a clock, how difficult will it be to get my clock to work in there? __________________ 1972 GMC 2500 Sierra 350 1971 Pontiac LeMans Sport 400 GTO/Judge Clone 1970 Pontiac GTO 400 convertible restoproject 1970 Pontiac Bonneville 455 convertible

02-09-2011, 06:08 PM	#2
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: difficult to make a clock work in a non-clock cluster? I added a clock to mine, not a big issue at all. Basically a hot wire (always hot) and a ground, easy stuff. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.