eBay Auction - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Trick76 · 03-15-2003, 01:15 AM

Looks like a halfway decent truck, and the motor sounds solid. a little overpriced though, especially with those wheels

1985 SWB Auction

Derek

apstguy · 03-15-2003, 01:26 AM

WAAAYYY overpriced. Wonder how much I could get from mine with a salvage title?

Trick76 · 03-15-2003, 01:30 AM

Motor sound friggin hardcore though

Derek

**smokinn** · 03-15-2003, 01:40 AM

He spent 9,000 on the motor? Where did he use it? For 9,000 I would expect something a little more and whats with them ungly lovers on the back window.

Jason

78SilveradoSWB · 03-15-2003, 04:25 AM

Doesn't look lowered and spending $9K on the engine, it should look it. Don't think its worth the $12K he wants.

C&C Chevy · 03-15-2003, 11:42 AM

for 9K he could of put a LS1 in the truck!

ironwood · 03-15-2003, 10:24 PM

That guy got professionally screwed for paying that much for a motor, and it should be show quality, like he said, for as much as he is asking. One of my high school buddies built a motor identical to that one and I think his ballpark range was about $2800.

z71runner · 03-16-2003, 08:04 PM

for just under 9 grand he could have bought a Ram Jet 502!!!!!!!

**swervin ervin** · 03-16-2003, 09:11 PM

Nice truck, body wise. I love white trucks. I don't see 12 grand though. If he's got 9 in the engine, it sure don't look it. He needs to take some time to detail the engine bay. He would have a better chance of getting more out of it if he did. What's up with the fuel filter anyway. Got 9 grand in the engine and a cheap arse fram inline filter. Yeah right.

Did you notice the dash? Crack right in the center of the gauge area. Then where did he get that tach? Looks like something you buy from JC Whitney. The wheels have way too much offset to the outside. They don't tuck under the fender wells. Looks like a ricer to me. With as much room as we have in there, he could at least get the correct wheels for it.

I could sit here and nitpick all night, but I do know what it costs to build these trucks. It ain't cheap. But from what I can see, it's not worth anywhere near $12,000.00. Although it looks to be in great shape. I can't get over the engine bay. As you all know, I very anal about a neat, clean engine bay.

I think I'll pass on it.

low 84 · 03-16-2003, 09:50 PM

hmmm, sounds more like 3 or 4 k motor. i would guess if hes REALLY lucky he will get 6 or 7 k out of that truck. i could be made nice with some changes

LOHRTBT · 03-16-2003, 10:04 PM

9k on motor and its that ugly!!??NOT!

over all nice truck but wayyyyyy too high

*mike reeh* · 03-17-2003, 02:56 AM

not to beat a dead horse, but 9K? I havent even loaded the pics of the engine bay but come on... dart II heads, cool heads but they are the cheapest iron heads that you can buy, the rods probably cost a couple hundred bucks, other than that, i dont see anything special about it.

cheeseball headers? cheap engine dress up (valve covers)? Mallory Unilite distributor (puke).. that truck aint worth no where near 12K.. I dont think Id pay half, even if I _was_ looking to buy.

check out the throttle return spring. and the spark plug wires dangling all over the place..

heh, and look how black the inside of the carb is.. either that puppy has caugh fire, or something is seriously out of tune.

ok, enough..

-mike

03-15-2003, 01:15 AM	#1
Trick76 Living la vida broka Join Date: Jan 2003 Location: P'ville California Posts: 221	eBay Auction Looks like a halfway decent truck, and the motor sounds solid. a little overpriced though, especially with those wheels 1985 SWB Auction Derek __________________ 1976 C10 Longbed lowered 5/7, hot 355/TH350. ~ SOLD 1974 C10 Shortbed Stepside 350/Saginaw ~ SOLD 1984 C10 Longbed 6.2l diesel 700r4. ~SOLD 1985 GMC C20 350 700r4, ~under the knife

03-15-2003, 01:26 AM	#2
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	WAAAYYY overpriced. Wonder how much I could get from mine with a salvage title? __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

03-15-2003, 01:30 AM	#3
Trick76 Living la vida broka Join Date: Jan 2003 Location: P'ville California Posts: 221	Motor sound friggin hardcore though Derek __________________ 1976 C10 Longbed lowered 5/7, hot 355/TH350. ~ SOLD 1974 C10 Shortbed Stepside 350/Saginaw ~ SOLD 1984 C10 Longbed 6.2l diesel 700r4. ~SOLD 1985 GMC C20 350 700r4, ~under the knife

03-15-2003, 04:25 AM	#5
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Doesn't look lowered and spending $9K on the engine, it should look it. Don't think its worth the $12K he wants. __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

03-15-2003, 11:42 AM	#6
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	for 9K he could of put a LS1 in the truck! __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

03-15-2003, 01:40 AM	#4
smokinn Senior Member Join Date: Aug 2002 Location: omaha,Ne Posts: 619	He spent 9,000 on the motor? Where did he use it? For 9,000 I would expect something a little more and whats with them ungly lovers on the back window. Jason

03-15-2003, 10:24 PM	#7
ironwood $640 truck// doesn't run Join Date: Jan 2003 Location: Buckley,Wa Posts: 122	That guy got professionally screwed for paying that much for a motor, and it should be show quality, like he said, for as much as he is asking. One of my high school buddies built a motor identical to that one and I think his ballpark range was about $2800. __________________ 74 C-20 LWB camper special stock350/350 53 Chevy 1/2 ton- in California, where the rust is not. Ready for some LOVE!!!

03-16-2003, 08:04 PM	#8
z71runner nothin to say Join Date: Feb 2003 Location: GlEnDaLe, ArIzOnA Posts: 143	for just under 9 grand he could have bought a Ram Jet 502!!!!!!! __________________ 1988 3500 Chevy Silverado 454 7.5 inch lift on 35 inch tires

03-16-2003, 09:11 PM	#9
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Nice truck, body wise. I love white trucks. I don't see 12 grand though. If he's got 9 in the engine, it sure don't look it. He needs to take some time to detail the engine bay. He would have a better chance of getting more out of it if he did. What's up with the fuel filter anyway. Got 9 grand in the engine and a cheap arse fram inline filter. Yeah right. Did you notice the dash? Crack right in the center of the gauge area. Then where did he get that tach? Looks like something you buy from JC Whitney. The wheels have way too much offset to the outside. They don't tuck under the fender wells. Looks like a ricer to me. With as much room as we have in there, he could at least get the correct wheels for it. I could sit here and nitpick all night, but I do know what it costs to build these trucks. It ain't cheap. But from what I can see, it's not worth anywhere near $12,000.00. Although it looks to be in great shape. I can't get over the engine bay. As you all know, I very anal about a neat, clean engine bay. I think I'll pass on it. __________________ Mike 1985 Chevy C-10

03-16-2003, 09:50 PM	#10
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	hmmm, sounds more like 3 or 4 k motor. i would guess if hes REALLY lucky he will get 6 or 7 k out of that truck. i could be made nice with some changes __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

03-16-2003, 10:04 PM	#11
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	9k on motor and its that ugly!!??NOT! over all nice truck but wayyyyyy too high __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-17-2003, 02:56 AM	#12
mike reeh 5 day ban, learn to behave. Join Date: Nov 2002 Location: san diego, ca Posts: 684	not to beat a dead horse, but 9K? I havent even loaded the pics of the engine bay but come on... dart II heads, cool heads but they are the cheapest iron heads that you can buy, the rods probably cost a couple hundred bucks, other than that, i dont see anything special about it. cheeseball headers? cheap engine dress up (valve covers)? Mallory Unilite distributor (puke).. that truck aint worth no where near 12K.. I dont think Id pay half, even if I _was_ looking to buy. check out the throttle return spring. and the spark plug wires dangling all over the place.. heh, and look how black the inside of the carb is.. either that puppy has caugh fire, or something is seriously out of tune. ok, enough.. -mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.