front-end part interchangeability... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68beater · 04-11-2002, 06:11 PM

I know that the spindles and rotors are different on 1/2 ton and 1 ton trucks..But are the crossmember, pitman arm, inner/outer tie-end rods, a-arms, and other miscellaneous front end parts the same?

**crossy** · 04-14-2002, 07:40 AM

some of the parts you mentioned are and some are not .??????? DAVE

04-11-2002, 06:11 PM	#1
68beater Registered User Join Date: Feb 2002 Posts: 32	front-end part interchangeability... I know that the spindles and rotors are different on 1/2 ton and 1 ton trucks..But are the crossmember, pitman arm, inner/outer tie-end rods, a-arms, and other miscellaneous front end parts the same?

04-14-2002, 07:40 AM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	some of the parts you mentioned are and some are not .??????? DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.