parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*rage'nrat638* · 03-15-2003, 07:19 PM

'85 Chevy C10 Parts:
- 4 Core Radiator Stock from '79 4x4-- $75.00--------GONE
- Rear Chrome Step Bumper from '85-- $75.00
- Chrome 400 Trans. pan-- $20.00
- Automatic Steering Column-- $100.00
- 350 Intake Stock Non-emission-- $75.00
- 454 Stock Intake Emission-1979-- $50.00
- AC Compressor 454 Stock 1979 drivers mount--50.00
- Stock Distributor HEI-- $25.00-----------------GONE
-b&m 350 shift kit new inbox--10.00
-pair stock 305-350 valve covers 10.00
-stock 85-305-10 bolt---drive shaft swb---25.00
-stock pulleys 85-305w a/c installed--20.00
-2 quadrajet carbs 454& 350 engine size 25.00 ea.

-all prices = or best offer+ shipping (fedx right down street)

**Pictures upon Request**

ironwood · 03-15-2003, 09:49 PM

interested in seeing the distributor
Thanks Dave

*rage'nrat638* · 03-16-2003, 12:48 PM

here is the distributer, need to be cleaned up a lil bit. also throw in a brand new HEI wires those cost 25 bucks. as u will need a new cap and rotori may even have the coil pack i'll try to find, can't promise.

*racedvl* · 03-16-2003, 04:01 PM

If ironwood ain't interested, I might just have to take that puppy off your hands, let me know. Jason.

Gregsmx · 03-16-2003, 07:23 PM

Mark, can you post a pic of the 454 a/c compressor? Do you have the brackets, and is it driver or passenger side mounted? Also the 454 emission intake, pic please!

*rage'nrat638* · 03-16-2003, 08:13 PM

the a/c comp.is driver side mount that is the bracketry i have ,and the intake just as i pulled them off both need to be cleaned and painted mark... p.s i looked for the dist. cap i did not see it.

ironwood · 03-17-2003, 06:21 AM

I think I will pass on the distributor, but thanks anyway.

*rage'nrat638* · 03-18-2003, 12:09 AM

ok woodstock its all yours let me know when you want to hookup

*racedvl* · 03-18-2003, 09:02 AM

Good deal.

gldevall · 03-18-2003, 02:20 PM

Have any pics of the bumper? And estimated freight to Baton Rouge.

*rage'nrat638* · 03-19-2003, 08:00 PM

working on picture of every thing....mark

scalawag · 03-19-2003, 09:04 PM

tell me about the q-jets

*rage'nrat638* · 03-19-2003, 09:39 PM

well the one off the 454 was on the truck when i bought it to make the 496 it came off that 454 intake pictured above. the water pump launched on it so did not hear it run.. but should be
ok . but my want to rebuild anyway kit cost about 12.00...
the other one same off that 350 intake out of a 1 ton van
that one i did hear running but both have been sitting in my heated garage for a year orso . i did rob the a/c kick-up off the 454 carb sorry..
the van was a 86 and the 454 was a 79 hope that answers your
questions MARK ...stop on by..

ElGracho · 03-19-2003, 09:41 PM

What trans went with that drive shaft?

*rage'nrat638* · 03-19-2003, 09:53 PM

well i though it was a350 but later came to find out it was not ...
heace the 350 rebuild kit guess what i am saying is i dont know
my buddy sold it (the trans) it was not a 700r or a 400 it was out
of my 85 c-10 did'nt they make some lock-up trans now you got
me going i can't remember what he said it was... but i hope you can use it stop on by....MARK

*1FaastC10* · 03-19-2003, 11:21 PM

TH350C maybe?

*rage'nrat638* · 03-19-2003, 11:37 PM

yea that sounds about right ,,,the guy that bought it had a700r
and had to move the crossmember alittle got to love chevys...
but used the same driveshaft....mark

03-15-2003, 07:19 PM	#1
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	parts for sale you come get'em there free '85 Chevy C10 Parts: - 4 Core Radiator Stock from '79 4x4-- $75.00--------GONE - Rear Chrome Step Bumper from '85-- $75.00 - Chrome 400 Trans. pan-- $20.00 - Automatic Steering Column-- $100.00 - 350 Intake Stock Non-emission-- $75.00 - 454 Stock Intake Emission-1979-- $50.00 - AC Compressor 454 Stock 1979 drivers mount--50.00 - Stock Distributor HEI-- $25.00-----------------GONE -b&m 350 shift kit new inbox--10.00 -pair stock 305-350 valve covers 10.00 -stock 85-305-10 bolt---drive shaft swb---25.00 -stock pulleys 85-305w a/c installed--20.00 -2 quadrajet carbs 454& 350 engine size 25.00 ea. -all prices = or best offer+ shipping (fedx right down street) Pictures upon Request Last edited by rage'nrat638; 03-19-2003 at 08:27 PM.

03-15-2003, 09:49 PM	#2
ironwood $640 truck// doesn't run Join Date: Jan 2003 Location: Buckley,Wa Posts: 122	interested in seeing the distributor Thanks Dave __________________ 74 C-20 LWB camper special stock350/350 53 Chevy 1/2 ton- in California, where the rust is not. Ready for some LOVE!!!

03-16-2003, 12:48 PM	#3
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	distributer here is the distributer, need to be cleaned up a lil bit. also throw in a brand new HEI wires those cost 25 bucks. as u will need a new cap and rotori may even have the coil pack i'll try to find, can't promise. Last edited by rage'nrat638; 07-12-2007 at 07:08 AM.

03-16-2003, 07:23 PM	#5
Gregsmx Registered User Join Date: Jan 2003 Location: San Antonio Tx Posts: 338	parts Mark, can you post a pic of the 454 a/c compressor? Do you have the brackets, and is it driver or passenger side mounted? Also the 454 emission intake, pic please! __________________ '75 Blazer RAT 4X4 "BLAZIN" - Custom frame off Here's the website I'm uploading pics to: Greg's frame off project

03-16-2003, 08:13 PM	#6
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	a/c and 454 intake the a/c comp.is driver side mount that is the bracketry i have ,and the intake just as i pulled them off both need to be cleaned and painted mark... p.s i looked for the dist. cap i did not see it. Last edited by rage'nrat638; 07-12-2007 at 07:08 AM.

03-16-2003, 04:01 PM	#4
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	If ironwood ain't interested, I might just have to take that puppy off your hands, let me know. Jason.

03-17-2003, 06:21 AM	#7
ironwood $640 truck// doesn't run Join Date: Jan 2003 Location: Buckley,Wa Posts: 122	I think I will pass on the distributor, but thanks anyway. __________________ 74 C-20 LWB camper special stock350/350 53 Chevy 1/2 ton- in California, where the rust is not. Ready for some LOVE!!!

03-18-2003, 12:09 AM	#8
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	distributer ok woodstock its all yours let me know when you want to hookup

03-18-2003, 09:02 AM	#9
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Good deal.

03-18-2003, 02:20 PM	#10
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Have any pics of the bumper? And estimated freight to Baton Rouge. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

03-19-2003, 08:00 PM	#11
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	working on picture of every thing....mark

03-19-2003, 09:04 PM	#12
scalawag Registered User Join Date: Aug 2002 Location: caledonia ms Posts: 260	tell me about the q-jets

03-19-2003, 09:39 PM	#13
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	quads well the one off the 454 was on the truck when i bought it to make the 496 it came off that 454 intake pictured above. the water pump launched on it so did not hear it run.. but should be ok . but my want to rebuild anyway kit cost about 12.00... the other one same off that 350 intake out of a 1 ton van that one i did hear running but both have been sitting in my heated garage for a year orso . i did rob the a/c kick-up off the 454 carb sorry.. the van was a 86 and the 454 was a 79 hope that answers your questions MARK ...stop on by..

03-19-2003, 09:41 PM	#14
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	What trans went with that drive shaft? __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

03-19-2003, 09:53 PM	#15
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	what trans? well i though it was a350 but later came to find out it was not ... heace the 350 rebuild kit guess what i am saying is i dont know my buddy sold it (the trans) it was not a 700r or a 400 it was out of my 85 c-10 did'nt they make some lock-up trans now you got me going i can't remember what he said it was... but i hope you can use it stop on by....MARK



Register or Log In To remove these advertisements.

03-19-2003, 11:21 PM	#16
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	TH350C maybe?

03-19-2003, 11:37 PM	#17
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	yea that sounds about right ,,,the guy that bought it had a700r and had to move the crossmember alittle got to love chevys... but used the same driveshaft....mark

Register or Log In To remove these advertisements.