RUN to the SUN MRYTLE BEACH - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 03-16-2003, 01:48 PM

Ok it, starts Thursday at Myrtle Beach!!! Can't wait to go. I will be going down Wed. night after work, going to work on the golf cart at the beach house Thursday, then go to the cruise in that night. Is anybody else going for the cruise-in? I have never done the cruise-in. It should be fun.
I may have my dad with me, they are at the beach house now waiting on me to come down. Hope the weather clears up by thin, it's been raining here all weekend, and they are calling for it tomorrow also. Hope to see some board members there. ANDY

Andy4639 · 03-16-2003, 07:27 PM

I can't beleive no one else is going it should be a good show, just checked the weather for the week and it looks good so far. I packed the truck some today and ready to go.

Ray Cobia · 03-17-2003, 12:49 PM

Andy, we are going Thur. morn. Will be driving our 69 Z-28 Camaro. Plan on driving in the parade Thur. night. Looks like rain but going anyway!!! Looking forward to it.

Andy4639 · 03-17-2003, 10:20 PM

Ray Cobia,

hope to see you at the cruise in. I will be in the red 71 lwb. I'm going Wed. night, hope it doesn't rain the whole time.

kingparts · 03-18-2003, 11:36 AM

We will be there Friday evening,leaving to go when my daugther gets out of school. Where can we meet Saturday morning around 9:00? I will have my cell phone with me. (803)397-5715.
David

Andy4639 · 03-18-2003, 01:45 PM

David,

I usually set up in the grass by the ditch, but because of the rain I will probably set up in the parking lot some where. I will be in the truck with the 10x10 tent for shade, I mean rain tent. Come on by I pan to get there around 8. I will be there friday also. Hope to see you there. Andy

70cst10 · 03-18-2003, 04:48 PM

Where in Myrtle Beach is it? If I'm not on duty, I'll try to make it out there..

kingparts · 03-18-2003, 05:13 PM

It is at the Waccamaw Pottery Mall. It is a outlet mall right near the center of Myrtle Beach. Just ask anybody when you get close, it is a popular mall. If you get lost call me on my cell phone number listed above.
David

Andy4639 · 03-18-2003, 05:19 PM

70cst10

It's at the Wacamaw shopping outlets on HWY 501 just before you get to the International water way. You want miss it. Its on your right headed towards the beach and left if headed towards Conway. Hope you can make it, come by and see us when you get there.

Andy4639 · 03-19-2003, 10:37 PM

OK I'm at the beach house if anyone is coming down, and want to get together at the show my # is (843) 361-8116.
I will be here all day Thursday. If I don't answer my mom or dad will. The skies are clear right now with out a cloud in the ski. Hope it stay's like this the rest of the weekend. Andy

03-16-2003, 01:48 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	RUN to the SUN MRYTLE BEACH Ok it, starts Thursday at Myrtle Beach!!! Can't wait to go. I will be going down Wed. night after work, going to work on the golf cart at the beach house Thursday, then go to the cruise in that night. Is anybody else going for the cruise-in? I have never done the cruise-in. It should be fun. I may have my dad with me, they are at the beach house now waiting on me to come down. Hope the weather clears up by thin, it's been raining here all weekend, and they are calling for it tomorrow also. Hope to see some board members there. ANDY __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-16-2003, 07:27 PM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	NO ONE GOING!!!! I can't beleive no one else is going it should be a good show, just checked the weather for the week and it looks good so far. I packed the truck some today and ready to go. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-17-2003, 12:49 PM	#3
Ray Cobia Registered User Join Date: Jan 2003 Location: W. Columbia, S.C. Posts: 39	Andy, we are going Thur. morn. Will be driving our 69 Z-28 Camaro. Plan on driving in the parade Thur. night. Looks like rain but going anyway!!! Looking forward to it. __________________ 72 Cheyenne-85 Short bed- 88 Silverado Step- side-69 camaro Z-28

03-17-2003, 10:20 PM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Cruise-in Ray Cobia, hope to see you at the cruise in. I will be in the red 71 lwb. I'm going Wed. night, hope it doesn't rain the whole time. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-18-2003, 11:36 AM	#5
kingparts Registered User Join Date: Nov 2000 Location: Clover, SC , US Posts: 971	We will be there Friday evening,leaving to go when my daugther gets out of school. Where can we meet Saturday morning around 9:00? I will have my cell phone with me. (803)397-5715. David __________________ 1970 Chevrolet Suburban 1967 Chevrolet C/10 Shortbed Stepside

03-18-2003, 01:45 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Meeting David, I usually set up in the grass by the ditch, but because of the rain I will probably set up in the parking lot some where. I will be in the truck with the 10x10 tent for shade, I mean rain tent. Come on by I pan to get there around 8. I will be there friday also. Hope to see you there. Andy __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-18-2003, 04:48 PM	#7
70cst10 Senior Member Join Date: Jun 2001 Location: Gaston, SC Posts: 580	Where in Myrtle Beach is it? If I'm not on duty, I'll try to make it out there.. __________________ Milan 1964 Chevelle SS 283/M20

03-18-2003, 05:13 PM	#8
kingparts Registered User Join Date: Nov 2000 Location: Clover, SC , US Posts: 971	It is at the Waccamaw Pottery Mall. It is a outlet mall right near the center of Myrtle Beach. Just ask anybody when you get close, it is a popular mall. If you get lost call me on my cell phone number listed above. David __________________ 1970 Chevrolet Suburban 1967 Chevrolet C/10 Shortbed Stepside

03-18-2003, 05:19 PM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Where is it? 70cst10 It's at the Wacamaw shopping outlets on HWY 501 just before you get to the International water way. You want miss it. Its on your right headed towards the beach and left if headed towards Conway. Hope you can make it, come by and see us when you get there. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-19-2003, 10:37 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Beach OK I'm at the beach house if anyone is coming down, and want to get together at the show my # is (843) 361-8116. I will be here all day Thursday. If I don't answer my mom or dad will. The skies are clear right now with out a cloud in the ski. Hope it stay's like this the rest of the weekend. Andy __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.