MD Heat risers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72 Super** · 02-19-2011, 12:01 PM

I have a few heat riser parts/set ups. I bought these off a member a few months back. I do not need all of these so I am offering them for sale.

$125 shipped for all 6 set ups/will seperate.

Thanks,
Ray

**72 Super** · 02-19-2011, 12:05 PM

more pics

teeitup · 02-19-2011, 12:05 PM

Ray, are they all 2wd, any 4x4? Thanks Randy

**72 Super** · 02-19-2011, 12:11 PM

Randy, would you have a picture of a 4x4 one? If you do I will check these.

Thanks,
Ray

teeitup · 02-19-2011, 12:13 PM

I got one on my swb 4x4, I'll try to ge a pic this afternoon. Thanks Randy

**72 Super** · 02-22-2011, 07:40 PM

ttt

**jerry moss** · 02-22-2011, 10:07 PM

Randy,
looks like 4 of them are 4x4.

teeitup · 02-22-2011, 11:26 PM

Thanks Jerry, thats what I was thinking.
Ray, I'm still thinking on them. What would you sell the 3 on the right in first pic for?
Thanks Randy

**72 Super** · 02-23-2011, 08:17 PM

Randy, I would take $90 shipped for the 3 set ups(including inner tins,tubes on the Right side. They are the best 3 of the lot.

Thanks,
Ray

**72 Super** · 02-26-2011, 10:27 AM

ttt

teeitup · 02-26-2011, 10:34 AM

Ray, I better pass, good deal though. Thanks Randy

chipflyer · 02-26-2011, 01:15 PM

Interested in your nicest one for a 4x4, how much?

Jeff

**72 Super** · 02-26-2011, 07:07 PM

Jeff, here is the nicest of the 6 ,it is the middle one in the right colum. The top one on the right is very nice as well, but has a couple pin holes.

Middle one (Very nice) $50 shipped
Top one (nice)$45 shipped

Here are a few pictures of the best one. Paint is just wore off on the bottom where it looks dark, no rust.
Thanks,
Ray

chipflyer · 02-26-2011, 09:48 PM

Nice parts but I think I better hold off for now.

Jeff

kellytheaker · 03-05-2011, 05:24 PM

i would be interested one for a 4+4

**72 Super** · 03-05-2011, 05:52 PM

Kellytheaker, I have a cople more left. PM sent.

Thanks,
Ray

**DANTIP** · 08-31-2011, 01:54 PM

I would like a 4x4 set. Would like to see a pic of the best remaining. THX!

**72 Super** · 08-31-2011, 07:43 PM

Dan,

The only one I have left is the one in post #2, the 4th picture down. It is very solid, but does have a few pin holes on the very edge of the portion the wraps around the exhaust pipe. Looking at it from the driver's side, the pin hole area would be closest to the firewall towards the engine at the very bottom edge. I can get a better picture over the weekend if your are interested.

Thanks,
Ray

02-19-2011, 12:01 PM	#1
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Heat risers I have a few heat riser parts/set ups. I bought these off a member a few months back. I do not need all of these so I am offering them for sale. $125 shipped for all 6 set ups/will seperate. Thanks, Ray Attached Images __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

02-19-2011, 12:05 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Heat risers Ray, are they all 2wd, any 4x4? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2011, 12:11 PM	#4
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: Heat risers Randy, would you have a picture of a 4x4 one? If you do I will check these. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

02-19-2011, 12:13 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Heat risers I got one on my swb 4x4, I'll try to ge a pic this afternoon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-22-2011, 07:40 PM	#6
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: Heat risers ttt __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

02-19-2011, 12:05 PM	#2
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: Heat risers more pics Attached Images __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

02-22-2011, 10:07 PM	#7
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,861	Re: Heat risers Randy, looks like 4 of them are 4x4. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-22-2011, 11:26 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Heat risers Thanks Jerry, thats what I was thinking. Ray, I'm still thinking on them. What would you sell the 3 on the right in first pic for? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2011, 08:17 PM	#9
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: Heat risers Randy, I would take $90 shipped for the 3 set ups(including inner tins,tubes on the Right side. They are the best 3 of the lot. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

02-26-2011, 10:27 AM	#10
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: Heat risers ttt __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

02-26-2011, 10:34 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Heat risers Ray, I better pass, good deal though. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-26-2011, 01:15 PM	#12
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Heat risers Interested in your nicest one for a 4x4, how much? Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

02-26-2011, 07:07 PM	#13
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: Heat risers Jeff, here is the nicest of the 6 ,it is the middle one in the right colum. The top one on the right is very nice as well, but has a couple pin holes. Middle one (Very nice) $50 shipped Top one (nice)$45 shipped Here are a few pictures of the best one. Paint is just wore off on the bottom where it looks dark, no rust. Thanks, Ray Attached Images __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White Last edited by 72 Super; 02-26-2011 at 07:11 PM.

02-26-2011, 09:48 PM	#14
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Heat risers Nice parts but I think I better hold off for now. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

03-05-2011, 05:24 PM	#15
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Heat risers i would be interested one for a 4+4



Register or Log In To remove these advertisements.

03-05-2011, 05:52 PM	#16
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: Heat risers Kellytheaker, I have a cople more left. PM sent. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

08-31-2011, 01:54 PM	#17
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,882	Re: Heat risers I would like a 4x4 set. Would like to see a pic of the best remaining. THX!

08-31-2011, 07:43 PM	#18
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: Heat risers Dan, The only one I have left is the one in post #2, the 4th picture down. It is very solid, but does have a few pin holes on the very edge of the portion the wraps around the exhaust pipe. Looking at it from the driver's side, the pin hole area would be closest to the firewall towards the engine at the very bottom edge. I can get a better picture over the weekend if your are interested. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

Register or Log In To remove these advertisements.