new to site with ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sstaten69 · 02-22-2011, 12:47 PM

Hello i live in sin city( for now) and my son is almost old enough to drive and being he has helped with our nova and chevelle he has the bug and wants to do a 69 or 70 chevy truck. we are going to look at a 69 tonite is there anything that we should look for as far as rust or hidden signs of damage.. thanks for all and any help Steve
Posted via Mobile Device

ChevLoRay · 02-22-2011, 12:56 PM

Welcome from the Heart of Arkansas!

I bought my youngest son a '69, when he started driving. He's the reason we're working on my '69, at his house.

Common trouble spots in less arid parts of the U.S., are cab corners, the rockers, the kick panels and usually beneath the battery box. There are plenty of horror stories about rust and cancer on these trucks, but it depends on where the truck has been kept. Keep reading. Others will give you more to look for.

ldgn63 · 02-22-2011, 01:28 PM

rockers are problematic to say the least. ive also seen several with rust on the drivers door at the top hinge.... i dunno why

**70cst** · 02-22-2011, 01:37 PM

Rust around the windshield area...

Underdash Wiring...make sure it is in decent shape.

Rust in the rockers and inside the cab by the vent areas...

Also consider...
What engine do you want...
Do you want an manual transmission or automatic?
Do you want a numbers matching truck?
AC...is that important?

Although you asked about possible rust issues...if you are starting to look these may be things to consider. Don't be afraid to get back with us if you want an opinon on the trucks value.
Just some thoughts. Good luck

1quik70 · 02-22-2011, 02:00 PM

Usual body rust is pretty evident when looking these old trucks over. I would pay close attention to wiring, body mounts, and core support under the battery. Check the SPID in the glovebox, and check the VIN!

Hardesty454 · 02-22-2011, 02:21 PM

Under cab, the mounts and cab corners (front and back). Dont forget the drip pan either, those are horrid to replace.

sstaten69 · 02-22-2011, 03:38 PM

Wow thanks everyone this helps alot. will let you know how this one goes?? he has been looking for somtime now he wants a short bed with the wood floor, a/c, bucket seats still trying to figure out what else he wants he looks at them in magazines and when we are at car show or just when he see's them out and about.
thanks again
Posted via Mobile Device

PanelDeland · 02-22-2011, 04:08 PM

Don't worry so much about what options it has,unless he wants to restore rather than modify it.Most options are fairly easy to swap.Mechanicals don't seem to be an issue since you've done others,so find the best body you can.The most expensive part of any build will be paint and bodywork.

Steve Hafner · 02-22-2011, 04:33 PM

The "track arms" or "trailing arms" that go from the rear - forward, were badly rusted under my 70 that lived in the snows of Virginia all of it's life before I had it - they could not be repaired and had to be replaced with new ones. Mine also had rust in the cab corners, door bottoms, fender bottoms, rockers, top of front bed panel, tailgate and top of the windshield area that others have talked about here. ALL of these things can be replaced or repaired - as long as you have DEEP POCKETS !!!

VA72C10 · 02-22-2011, 05:01 PM

I agree with looking for the best body possible. Unless you plan on doing the body work that will be the most expensive part. Rockers and cab corners are replaced easily enough....it's rust on the firewall and especially around the hinge areas on the door and around the windshield that are the biggest areas to look out for and most expensive/hardest to fix. Keep us updated on your search! Being in Nevada you're going to have a better selection of trucks in good shape to start with than most of us do....so you're already ahead of the game

Constructor1 · 02-22-2011, 05:22 PM

My 1970 is a Arizona truck so would be similiar to what you will be looking at. The only rust I had was on the floor at the kick panels. I would try and pull the carpet up at this area. Good look and welcome. I am fairly new to this site, but have found it to have tons of info and a lot of great members more than willing to offer help.

sstaten69 · 02-23-2011, 01:06 AM

Ok called the guy to go and look at the truck and the luck of charlie brown ( I GOT A ROCK)found me again. so a guy named Steve called him this morning to look at the truck and bought it.. wow what are the odds of that. oh well it was a long bed and my son doesnt like the looks of those so we will keep looking and he will have to keep saving. thanks for all the help we was very happy when i showed him the replys and he wrote all of the key places to look ,down in a little folder (i think it is his wish book) with pics of trucks..

sstaten69 · 08-12-2012, 12:51 AM

Ok its been over a year now, we moved to Missouri got a house and got settled in, and yep our son is driving, and beeing he still has to bug to do a truck. We have looked at alot of trucks over the past year and finally found one that will be a good start, a 68 chevy long bed not to bad the owner hasnt started it in almost 2 years so will look at getting it running, has some rot on the rockers and in the bed, dont think this will be to bad of a fix we will do this ourselves. he has a book of all kinds of pics and ideas of what he want to do with the truck, so guess the fun starts... thanks for all of the tips on what to look for...tried to add a pic of it but cant seem to figure it out.

sstaten69 · 10-03-2012, 11:06 PM

OK update, we pulled the holley crap off of it. using his sisters edelbrock, new fuel pump,oil/filter cleaned up the wiring alittle. and ITS ALIVE kid has been grinnin ear to ear for hours. being it has been sitting a few years before we got it we started it using a gas can, need to clean the tank out, then he will get some behind the wheel time on it...

ole dollor · 10-03-2012, 11:13 PM

welcome from Texas...hope you find a good truck to work on, there is a for sale on the board, you may want to look at it...there is some nice trucks for sale....

sstaten69 · 10-14-2012, 05:10 PM

ok we got the tank all cleaned out, so it running real good. Drove it around the block and coming up to the stop sign no brakes. Back brakes are gone after looking at them we found a hole in the front to rear brake line so will need to replace the line. makes it easy to smoke the tire (yep its a peg leg for now). so after telling him how to do it the kid did his first tire fire today, but still not driving it to far yet as its really hard to stop that truck.

c10srule · 10-14-2012, 05:41 PM

great to see younger generations enjoying these old trucks

GMCJOE · 10-14-2012, 06:49 PM

I think it is time for you to start a build thread. Glad the youngsters are staying interested in the old school trucks.

sstaten69 · 01-20-2013, 11:51 AM

Ok he has pulled off all of the mouldings and emblems, and he has been learning how to weld up the holes, and spot prime it.(it's lookin really good) got the brakes working ok needs power brakes for sure..And know back tires. He cant wait for summer he wants to get a summer job to get more parts for his truck. You know power brakes,steering,lowering kit and a mountain of other parts.. think he will get it legal and on the road for school next year. (his jr year) wish i could get all the pics to load....

oneoff · 01-20-2013, 12:52 PM

Welcome to the site and becoming a C/10 owner. Great people and information here!!!

rogergodding · 01-20-2013, 01:03 PM

You'd better get some pics up quick!!

Still having trouble with that?

So.Cal.Super · 01-20-2013, 01:29 PM

Quote:

Originally Posted by rogergodding

You'd better get some pics up quick!!

Still having trouble with that?

x2!!!

always wanted to do that

Have your son start a build thread, great way to document what he does.

Best of luck!

sstaten69 · 02-01-2013, 02:06 PM

Quote:

Originally Posted by rogergodding

You'd better get some pics up quick!!

Still having trouble with that?

yep still cant figure it out... it ask for a http:// and i cant find that i have the pics in my pics folder?

rogergodding · 02-01-2013, 08:27 PM

Click on the paper clip next to the smiley face and you can browse your computer to upload them... if not shoot me an email with them attached and I can do it.... rogergodding@hotmail.com.....

sstaten69 · 02-01-2013, 08:31 PM

ok got it posted a new thread called this is my sons truck... thanks for the help...

02-22-2011, 12:47 PM	#1
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	new to site with ? Hello i live in sin city( for now) and my son is almost old enough to drive and being he has helped with our nova and chevelle he has the bug and wants to do a 69 or 70 chevy truck. we are going to look at a 69 tonite is there anything that we should look for as far as rust or hidden signs of damage.. thanks for all and any help Steve Posted via Mobile Device

02-22-2011, 12:56 PM	#2
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: new to site with ? Welcome from the Heart of Arkansas! I bought my youngest son a '69, when he started driving. He's the reason we're working on my '69, at his house. Common trouble spots in less arid parts of the U.S., are cab corners, the rockers, the kick panels and usually beneath the battery box. There are plenty of horror stories about rust and cancer on these trucks, but it depends on where the truck has been kept. Keep reading. Others will give you more to look for. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

02-22-2011, 01:28 PM	#3
ldgn63 Registered User Join Date: Dec 2005 Location: DFW Posts: 81	Re: new to site with ? rockers are problematic to say the least. ive also seen several with rust on the drivers door at the top hinge.... i dunno why

02-22-2011, 01:37 PM	#4
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: new to site with ? Rust around the windshield area... Underdash Wiring...make sure it is in decent shape. Rust in the rockers and inside the cab by the vent areas... Also consider... What engine do you want... Do you want an manual transmission or automatic? Do you want a numbers matching truck? AC...is that important? Although you asked about possible rust issues...if you are starting to look these may be things to consider. Don't be afraid to get back with us if you want an opinon on the trucks value. Just some thoughts. Good luck __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 02-22-2011 at 01:42 PM.

02-22-2011, 02:00 PM	#5
1quik70 Registered User Join Date: Apr 2010 Location: Jeffersonville, Indiana Posts: 136	Re: new to site with ? Usual body rust is pretty evident when looking these old trucks over. I would pay close attention to wiring, body mounts, and core support under the battery. Check the SPID in the glovebox, and check the VIN!

02-22-2011, 02:21 PM	#6
Hardesty454 Registered User Join Date: Feb 2011 Location: Riverbank, Ca Posts: 1,006	Re: new to site with ? Under cab, the mounts and cab corners (front and back). Dont forget the drip pan either, those are horrid to replace.

02-22-2011, 03:38 PM	#7
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: new to site with ? Wow thanks everyone this helps alot. will let you know how this one goes?? he has been looking for somtime now he wants a short bed with the wood floor, a/c, bucket seats still trying to figure out what else he wants he looks at them in magazines and when we are at car show or just when he see's them out and about. thanks again Posted via Mobile Device

02-22-2011, 04:08 PM	#8
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: new to site with ? Don't worry so much about what options it has,unless he wants to restore rather than modify it.Most options are fairly easy to swap.Mechanicals don't seem to be an issue since you've done others,so find the best body you can.The most expensive part of any build will be paint and bodywork. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

02-22-2011, 04:33 PM	#9
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: new to site with ? The "track arms" or "trailing arms" that go from the rear - forward, were badly rusted under my 70 that lived in the snows of Virginia all of it's life before I had it - they could not be repaired and had to be replaced with new ones. Mine also had rust in the cab corners, door bottoms, fender bottoms, rockers, top of front bed panel, tailgate and top of the windshield area that others have talked about here. ALL of these things can be replaced or repaired - as long as you have DEEP POCKETS !!! __________________ . . . . Life is short . . . we only have, right now. . . . . My 70 C-10's BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=475526

02-22-2011, 05:01 PM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: new to site with ? I agree with looking for the best body possible. Unless you plan on doing the body work that will be the most expensive part. Rockers and cab corners are replaced easily enough....it's rust on the firewall and especially around the hinge areas on the door and around the windshield that are the biggest areas to look out for and most expensive/hardest to fix. Keep us updated on your search! Being in Nevada you're going to have a better selection of trucks in good shape to start with than most of us do....so you're already ahead of the game __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-22-2011, 05:22 PM	#11
Constructor1 Registered User Join Date: Jan 2011 Location: Phoenix, AZ Posts: 89	Re: new to site with ? My 1970 is a Arizona truck so would be similiar to what you will be looking at. The only rust I had was on the floor at the kick panels. I would try and pull the carpet up at this area. Good look and welcome. I am fairly new to this site, but have found it to have tons of info and a lot of great members more than willing to offer help.

02-23-2011, 01:06 AM	#12
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: new to site with ? Ok called the guy to go and look at the truck and the luck of charlie brown ( I GOT A ROCK)found me again. so a guy named Steve called him this morning to look at the truck and bought it.. wow what are the odds of that. oh well it was a long bed and my son doesnt like the looks of those so we will keep looking and he will have to keep saving. thanks for all the help we was very happy when i showed him the replys and he wrote all of the key places to look ,down in a little folder (i think it is his wish book) with pics of trucks..

08-12-2012, 12:51 AM	#13
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: new to site with ? Ok its been over a year now, we moved to Missouri got a house and got settled in, and yep our son is driving, and beeing he still has to bug to do a truck. We have looked at alot of trucks over the past year and finally found one that will be a good start, a 68 chevy long bed not to bad the owner hasnt started it in almost 2 years so will look at getting it running, has some rot on the rockers and in the bed, dont think this will be to bad of a fix we will do this ourselves. he has a book of all kinds of pics and ideas of what he want to do with the truck, so guess the fun starts... thanks for all of the tips on what to look for...tried to add a pic of it but cant seem to figure it out. Last edited by sstaten69; 08-12-2012 at 01:01 AM.

10-03-2012, 11:06 PM	#14
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: new to site with ? OK update, we pulled the holley crap off of it. using his sisters edelbrock, new fuel pump,oil/filter cleaned up the wiring alittle. and ITS ALIVE kid has been grinnin ear to ear for hours. being it has been sitting a few years before we got it we started it using a gas can, need to clean the tank out, then he will get some behind the wheel time on it...

10-03-2012, 11:13 PM	#15
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: new to site with ? welcome from Texas...hope you find a good truck to work on, there is a for sale on the board, you may want to look at it...there is some nice trucks for sale....



Register or Log In To remove these advertisements.

10-14-2012, 05:10 PM	#16
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: new to site with ? ok we got the tank all cleaned out, so it running real good. Drove it around the block and coming up to the stop sign no brakes. Back brakes are gone after looking at them we found a hole in the front to rear brake line so will need to replace the line. makes it easy to smoke the tire (yep its a peg leg for now). so after telling him how to do it the kid did his first tire fire today, but still not driving it to far yet as its really hard to stop that truck.

10-14-2012, 05:41 PM	#17
c10srule Registered User Join Date: Oct 2012 Location: oran,mo. Posts: 171	Re: new to site with ? great to see younger generations enjoying these old trucks

10-14-2012, 06:49 PM	#18
GMCJOE Registered User Join Date: Aug 2012 Location: Junction City, KS Posts: 782	Re: new to site with ? I think it is time for you to start a build thread. Glad the youngsters are staying interested in the old school trucks. __________________ Joseph Joe's 69 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=543253 1969 GMC SWB-350 SBC 700R4 2013 Ram 2500 CC Laramie Longhorn Edition-6.7 PPEI EFI Live CSP5 5” ProFlo Exhaust

01-20-2013, 11:51 AM	#19
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: new to site with ? Ok he has pulled off all of the mouldings and emblems, and he has been learning how to weld up the holes, and spot prime it.(it's lookin really good) got the brakes working ok needs power brakes for sure..And know back tires. He cant wait for summer he wants to get a summer job to get more parts for his truck. You know power brakes,steering,lowering kit and a mountain of other parts.. think he will get it legal and on the road for school next year. (his jr year) wish i could get all the pics to load....

01-20-2013, 12:52 PM	#20
oneoff Registered User Join Date: Jun 2011 Location: Parker Colorado Posts: 174	Re: new to site with ? Welcome to the site and becoming a C/10 owner. Great people and information here!!! __________________ Build: http://67-72chevytrucks.com/vboard/s...d.php?t=541803 Dennis H 1969 Chevy C10, SWB, LS3,6.2L engine 1969 Chevy Chevelle SS,BBC, Convertible

01-20-2013, 01:03 PM	#21
rogergodding Registered User Join Date: Aug 2007 Location: Sachse, Texas Posts: 614	Re: new to site with ? You'd better get some pics up quick!! Still having trouble with that?

02-01-2013, 08:27 PM	#24
rogergodding Registered User Join Date: Aug 2007 Location: Sachse, Texas Posts: 614	Re: new to site with ? Click on the paper clip next to the smiley face and you can browse your computer to upload them... if not shoot me an email with them attached and I can do it.... rogergodding@hotmail.com.....

02-01-2013, 08:31 PM	#25
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: new to site with ? ok got it posted a new thread called this is my sons truck... thanks for the help...

Register or Log In To remove these advertisements.