CA 71 GMC partout

[ka_jd7and1]

For any purchase made, a portion of the proceeds are being donated to the Friends of the 133rd fund to finish this soldier's gift to his wife: http://67-72chevytrucks.com/vboard/s...39&postcount=1

Parting out a '70 GMC (I typoed the thread title). I'm trying to base prices off of what I have seen things going for on here. If I am too high, let me know! Feel free to make an offer on anything. If you want something that you don't see, let me know and I'll see if it's on there.

See pictures here: http://s66.photobucket.com/albums/h2...0/C10%20parts/

Bad parts/already spoken for parts:
Cab is rusted out
Fenders are rusted out
Corners of doors are rusted out
Engine has a holey oilpan issue (threw a rod)
Windshield, heater controls, heater box, tailgate hardware, crossmember under radiator, possibly saddle tanks are spoken for

Good parts (daily driver quality):

Front sway bar, with all mounting brackets $50 shipped

Green floor shift steering column SCRAPPED

Front bumper $30 scrapped

Front bumper frame brackets $10

GMC core support $60 SOLD TO 72GMCER

Hood $30 local pickup only (has a dent on the right front corner)

Driver's side wheel tub $20 (has rust on 1 corner, still usable/fixable?)

Bedfloor -SOLD to keanevann

Longbed bedsides $80 each (have door for saddle fuel tanks, pass. side had something hit it in the taillight area, look pretty straight otherwise) I have the bed apart now, metal looks pretty good to me.

Steel floor bed header panel FREE (completely rusted out at the bottom, maybe somebody can use it to patch the top of theirs?, local pickup only) scrapped

GMC tailgate (no hardware, gate only) $60 + ship (does have 1 large dent on top left, and a couple smaller dents inside. Relatively straight though.)

Reverse light bucket w/ pigtail, $5 each

Driver side brake light bucket $5

Brake light lens, mounting tab has a chip out of it but lens itself looks great, $5

Steel utility bumper $40 scrapped

Rear slider window $30 + ship

Rearview mirror, has green mount cover $10

Defroster vents, green $10 for both

Ball bearing ashtray $10 sold to karphan

Brake/clutch pedals $10 + ship

Gas pedal assembly with mounting bracket, arm, and carb linkage, no actual pedal $20

Gauges $30 JUNKED

SM465 transmission w/ double bend shifter $100 (condition unknown) Will sell shifter only if I can figure out how to get it off

Dana 60 8 lug rearend $100 (supposed to have 4.10 gears, condition unknown)

Leaf springs scrapped

8 lug wheels FREE local pickup only

In-cab gas tank $20 local pickup only (fuel line broken off)

Power steering pump, gear, lines $40 + ship

Front suspension $40 + ship

Stock '80s 350 engine parts: intake, 882 heads, exhaust manifolds JUNKED

Thanks guys!

[karphan]

I'll take the ashtray. Shipped to Sparks, NV 89441. Thanks, Dan. PM sent

[vasquezmrysvll]

interested in the front bumper with brackets, ever come near sac?

[ka_jd7and1]

Originally Posted by vasquezmrysvll

pics of the front bumper and brackets please.

Link to pics in my original post. Can get better pics if you want, all I had was my cell phone camera.

[vasquezmrysvll]

i see it now

[vasquezmrysvll]

so do you ever come near sac?

[c1069]

what is the history on windshield?

[ka_jd7and1]

Windshield is spoken for.... it's going on my truck.

[ka_jd7and1]

Originally Posted by vasquezmrysvll

so do you ever come near sac?

I don't normally, no...... I do have a wedding to go to in June though.

[c1069]

Originally Posted by ka_jd7and1

Windshield is spoken for.... it's going on my truck.

Thanks.

[vasquezmrysvll]

i would really like to have the bumper and brackets, but June is a ways out. thanks anyways, bump for ya!

[ka_jd7and1]

karphan, will ship tomorrow.

[s_nova69]

I am looking for a decent rear tail light harness. I would take it from ya if it is in good shape. thanks Phil

[72gmcer]

Any idea on the cost of shipping the core support to tx 77503?
Posted via Mobile Device

[ka_jd7and1]

nova, let me dig into the truck this weekend and see what condition it's in.

72, I don't know.... let me do some shopping around and I'll get you a quote.

[old 71]

Can I get inline for core support local pick up ok?

[CEE1NG_RED]

...do you have the rear brackets and bolts for the rear bumper? If so, condition and how much shipped to 9087 Long Beac, CA? Thanks..


Also, any pics??

[niceguy678us]

Looking for brake parts for 70-72 front disk truck. I need the little "T" fittings on the lines, and the "junction fittings" on the lines around the front crossmember area. Also looking for a proportioning valve for a front disk truck.

Basically I have a bare frame and I ordered a stainless steel brake line kit. All it came with were the lines and none of the little "female to female" fittings, or the "T" fittings that join the actual lines together.

Let me know what you got. You can just take a pair of side cutters and chop the lines on either side of the fittings and send them to me if that would be easier for you.

Thank you for your time.

[ka_jd7and1]

By the way.... the truck is at my buddy's house, not mine. So, anything I need to look at won't be instant. I'm going to start stripping it down on Saturday.

Responses, in order:

old71, I am open to local pickup. Let me see what 72gmcer wants to do once I get a quote.

red, as far as I know everything is there for the rear bumper..... it has a big utility-style bumper on it. Is that what you're looking for? Can get a pic on Saturday.

niceguy, as far as I remember the brake lines were a little rusty..... let me get under the truck on Saturday and I can get a better look.

[72gmcer]

can u post pics of the core support

[ka_jd7and1]

There's a pic in the link in my first post..... I can get a shot from the backside too if you'd like.

[72gmcer]

i was just wanting to see if its rusted out below the battery

[ka_jd7and1]

OK, PM replies to everybody......

[karphan]

Got the ashtray today. Looks good. Thank You. Dan

[72gmcer]

sent u a pm