KY Steel rear rollpan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

junkyardjohn · 02-27-2011, 07:14 PM

This is a steel rear fleetside rollpan with licence plate bucket that I've had for about 10 years. Today was the first time it was out of the box, so I guess I don't need it. It's heavy gauge metal & seems to be well made. It's not chineeze junk & I think it's from oklahoma. The old shipping lable says 21 lbs. I need $135 shipped for it. Thanks John

junkyardjohn · 02-27-2011, 10:36 PM

Ttt

junkyardjohn · 02-28-2011, 12:34 PM

TTT ONE MORE TIME... IT'S A WHOLE LOT CHEAPER THAN NEW & WAS ONLY OUT OF THE BOX FOR THE PICTURE.

JOHN

ffk · 02-28-2011, 12:52 PM

hey i sent a pm

junkyardjohn · 02-28-2011, 04:23 PM

I hope these are the pic.s you wanted. The instuctions say it'll fit ant chevy fleetside from 67 -87 & there is no welding required. I'll p.m. You Thanks John

67swb72klb · 02-28-2011, 04:58 PM

so is it a mark k part for 67-72 fleet what about lic plate lite ? interested

junkyardjohn · 02-28-2011, 05:47 PM

I'M PRETTY SURE IT IS. I BOUGHT IT FROM ANOTHER VENDOR, BUT IT SAY MADE IN OKLAHOMA, & I BELIEVE THEY'RE THE ONLY ONES IN OK. THAT MAKES THEM. IT IS A QUALITY PIECE. IT DOESN'T HAVE ANY PROVISIONS FOR A TAG LIGHT..... I GUESS IF YOU WANTED ONE YOU'D HAFTA CUT A HOLE IN THE SHELF ABOVE THE TAG. I'VE HAD IT AN AWFUL LONG TIME (LIKE 10 YEARS) & HAVE NEVER HAD IT OUT OF THE BOX BEFORE YESTERDAY & I'M SURE THAT I PAID ALOT MORE THAN THAT WITH 2001 DOLLARS. I'M JUST GETTING OUT OF THE 67-72 HOBBY, & BEEN CONCENTRATING ON OLD MILITARY TRUCKS.

JOHN

ffk · 02-28-2011, 06:05 PM

sent you a pm

junkyardjohn · 02-28-2011, 06:14 PM

Sold pending.... Thanks john

crushermechanic · 02-28-2011, 09:57 PM

if the sale falls through i will take it.

junkyardjohn · 03-01-2011, 08:36 AM

I TOLD THIS MEMBER I WOULD HOLD THEM FOR HIM FOR A COUPLE OF WEEKS, FOR A $25 DEPOSIT THRU PAYPAL. HE AGREED.. BUT I HAVEN'T SEEN ANY MONEY YET. I'VE HAD AN AWFUL LOT OF PEOPLE WASTE MY TIME & TIE UP MY PARTS OVER THE YEARS.. SO IF HE DOESN'T COME THRU BY SAT... YOU'RE UP. IT LOOKS LIKE I'M ONLY ABOUT 120 MILES NORTH OF YOU. NEED ANY OTHER HARD TO FIND PARTS?? IT MIGHT BE WORTH A TRIP UP HERE. JOHN

crushermechanic · 03-01-2011, 08:49 AM

i need a tailgate for a fleet chevy. i have been looking for a while but no luck all i have found are worse than mine.

67swb72klb · 03-01-2011, 09:31 AM

was interested too had to step away for a few so i lost

junkyardjohn · 03-01-2011, 10:27 AM

Quote:

Originally Posted by crushermechanic

i need a tailgate for a fleet chevy. i have been looking for a while but no luck all i have found are worse than mine.

I THINK I HAVE A DECENT GMC FLEETSIDE TAILGATE IN THE SHOP. I ALSO HAVE A FEW NICE RUSTFREE DOORS FROM THE DERSERT...... MIGHT BE WORTH A LITTLE ROADTRIP.

(QUOTE) was interested too had to step away for a few so i lost (QUOTE) YOUR UP THIRD 67SWB72 NO DISSAPOINTMENTS HERE... I JUST HAVE MORE STUFF THAN I NEED.

JOHN

*Shane* · 03-01-2011, 11:47 AM

got any nice 67-68 hoods john? i'm south of you by about 200 miles ...

junkyardjohn · 03-01-2011, 12:52 PM

Quote:

Originally Posted by shane

got any nice 67-68 hoods john? I'm south of you by about 200 miles ...

no sorry shane... Good ones are almost impossible to find. Thats the only chineeze sheetmetal i've stooped to buy, is a goodmark 67-68 cowl hood.

john

*Shane* · 03-02-2011, 09:44 AM

thanks john ... i know what you mean about the impossible to find part

02-27-2011, 07:14 PM	#1
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Steel rear rollpan This is a steel rear fleetside rollpan with licence plate bucket that I've had for about 10 years. Today was the first time it was out of the box, so I guess I don't need it. It's heavy gauge metal & seems to be well made. It's not chineeze junk & I think it's from oklahoma. The old shipping lable says 21 lbs. I need $135 shipped for it. Thanks John Attached Images __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST Last edited by junkyardjohn; 02-27-2011 at 11:45 PM.

02-27-2011, 10:36 PM	#2
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Steel rear rollpan Ttt __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-28-2011, 12:34 PM	#3
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Steel rear rollpan TTT ONE MORE TIME... IT'S A WHOLE LOT CHEAPER THAN NEW & WAS ONLY OUT OF THE BOX FOR THE PICTURE. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-28-2011, 12:52 PM	#4
ffk Registered User Join Date: Oct 2010 Location: lowell, in Posts: 271	Re: Steel rear rollpan hey i sent a pm __________________ my build thread -- (http://67-72chevytrucks.com/vboard/s...d.php?t=438604)

02-28-2011, 04:23 PM	#5
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Steel rear rollpan I hope these are the pic.s you wanted. The instuctions say it'll fit ant chevy fleetside from 67 -87 & there is no welding required. I'll p.m. You Thanks John Attached Images __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST Last edited by junkyardjohn; 02-28-2011 at 05:49 PM.

02-28-2011, 04:58 PM	#6
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,452	Re: Steel rear rollpan so is it a mark k part for 67-72 fleet what about lic plate lite ? interested __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

02-28-2011, 05:47 PM	#7
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Steel rear rollpan I'M PRETTY SURE IT IS. I BOUGHT IT FROM ANOTHER VENDOR, BUT IT SAY MADE IN OKLAHOMA, & I BELIEVE THEY'RE THE ONLY ONES IN OK. THAT MAKES THEM. IT IS A QUALITY PIECE. IT DOESN'T HAVE ANY PROVISIONS FOR A TAG LIGHT..... I GUESS IF YOU WANTED ONE YOU'D HAFTA CUT A HOLE IN THE SHELF ABOVE THE TAG. I'VE HAD IT AN AWFUL LONG TIME (LIKE 10 YEARS) & HAVE NEVER HAD IT OUT OF THE BOX BEFORE YESTERDAY & I'M SURE THAT I PAID ALOT MORE THAN THAT WITH 2001 DOLLARS. I'M JUST GETTING OUT OF THE 67-72 HOBBY, & BEEN CONCENTRATING ON OLD MILITARY TRUCKS. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-28-2011, 06:05 PM	#8
ffk Registered User Join Date: Oct 2010 Location: lowell, in Posts: 271	Re: Steel rear rollpan sent you a pm __________________ my build thread -- (http://67-72chevytrucks.com/vboard/s...d.php?t=438604)

02-28-2011, 06:14 PM	#9
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Steel rear rollpan Sold pending.... Thanks john __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-28-2011, 09:57 PM	#10
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 357	Re: Steel rear rollpan if the sale falls through i will take it.

03-01-2011, 08:36 AM	#11
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Steel rear rollpan I TOLD THIS MEMBER I WOULD HOLD THEM FOR HIM FOR A COUPLE OF WEEKS, FOR A $25 DEPOSIT THRU PAYPAL. HE AGREED.. BUT I HAVEN'T SEEN ANY MONEY YET. I'VE HAD AN AWFUL LOT OF PEOPLE WASTE MY TIME & TIE UP MY PARTS OVER THE YEARS.. SO IF HE DOESN'T COME THRU BY SAT... YOU'RE UP. IT LOOKS LIKE I'M ONLY ABOUT 120 MILES NORTH OF YOU. NEED ANY OTHER HARD TO FIND PARTS?? IT MIGHT BE WORTH A TRIP UP HERE. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

03-01-2011, 08:49 AM	#12
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 357	Re: Steel rear rollpan i need a tailgate for a fleet chevy. i have been looking for a while but no luck all i have found are worse than mine.

03-01-2011, 09:31 AM	#13
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,452	Re: Steel rear rollpan was interested too had to step away for a few so i lost __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

03-01-2011, 11:47 AM	#15
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Steel rear rollpan got any nice 67-68 hoods john? i'm south of you by about 200 miles ...

03-02-2011, 09:44 AM	#17
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Steel rear rollpan thanks john ... i know what you mean about the impossible to find part



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.