GA Wtb 1968 292 engine (running or not) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orange-orange · 02-28-2011, 07:33 PM

Want to buy a 1968 chevy 292 inline 6 engine. Prefer complete running but will buy a rebuildable core. The date and codes do matter to me. The engine codes for 292's that year I am looking for are " UH "or " UR " these were used on manual transmission trucks. If you have one please send me a PM or a post with the full engine code, condition, and price. The code is located just behind the distributor on a surfaced pad and should read something like........ F0503UH ....... Flint, month,day,engine code... 770 401-9307 if you would like to call. Thanks Randy

orange-orange · 03-02-2011, 12:48 PM

still looking !

STOCKISH · 03-02-2011, 01:17 PM

I know its not what you were asking for but I have a complete 1968 250 from a manual trans truck. Was a recent rebuild but truck got wrecked and the guy took the manifolds off to put on another engine. Truck sat outside with no hood for a while and there is rust in the intake/exhaust ports. Might be good for parts for you. Free if you want it. In Raleigh NC.

orange-orange · 03-09-2011, 08:43 PM

Hey Thank You 1972SuperCheyenne ! That is a really nice offer. I have a really cool old forestry truck that I sure would like to find an original 292 for before I invest in its rebuild. I thought it was original but found out it was replaced. Again Thanks...If I can be of any help to you with a project or part or around Atlanta let me know ! Randy

orange-orange · 03-12-2011, 10:22 AM

still looking ?

orange-orange · 03-31-2011, 07:07 PM

still looking ?

DieselEater · 03-31-2011, 09:24 PM

I'll check the code on the one I know of....Should get back to you Monday or so...

A.........

qksilver · 03-31-2011, 11:27 PM

I will be out at my shop tomorrow. I have a complete 292 out of a 68 but not sure what the codes are. Was running when i pulled it.Also have complete a/c,p/s and alternator set up off of a 68 truck I got from Tkornic.

Will check and get back to you.

Steve

qksilver · 04-01-2011, 09:25 PM

I went out and took pictures of all the lettering on the engine. I will down load them tomorrow and post them. Been a way too long day to deal with it tonight, but wanted to let you know that i got them.

Steve

orange-orange · 04-03-2011, 09:03 PM

Hi Steve, I just checked in and saw your message ! I look forward to your reply as I hope it and all of the accessories will work. Thanks again so much ! Randy 770 401-9307

orange-orange · 04-03-2011, 10:29 PM

Hello DieselEater, I look forward to your reply ! Thank you, Randy 770 401-9307 All of you are nice to help.

DieselEater · 04-04-2011, 12:19 AM

OK here's what I found.....

- 377129
- 712925
- CE 3 8

I forgot where the first two numbers were located, but one was on the back where the flywheel goes, stamped in, and the other was on the passenger side cast to the block. I was told this was a factory crate engine ready to go!

Hope this helps...

A.......

orange-orange · 04-05-2011, 05:58 PM

Hello DieselEater, The 377129 casting number is a newer block made from 1973 up. This is probably a 1978 by the last number in the CE 3 8 code. I sure do thank you for posting it and I did see another member is looking for a 292 so maybe he will pick up on this thread. Thanks again, Randy

**Tmend** · 04-05-2011, 06:40 PM

im selling my 292 however i think california is out of the question if not let me know and i will check the #s

orange-orange · 04-05-2011, 07:52 PM

Hello Tmend, Yes, Please let me know what you have ! I have been looking for a while. Thanks Randy

70chevymanshort · 04-05-2011, 10:24 PM

Is Idaho to far for you to get a motor?
Posted via Mobile Device

70chevymanshort · 04-05-2011, 11:03 PM

I have one still in truck, I'll have to check the numbers.
Posted via Mobile Device

**Tmend** · 04-06-2011, 12:05 AM

Mine reads F0501TNA does that # number even look right
Posted via Mobile Device

70chevymanshort · 04-06-2011, 02:40 PM

Here are the numbers on mine, f0619ccc and 23L138256.

orange-orange · 04-06-2011, 10:34 PM

Hello Tmend, Your engine is a 1970 292 engine for manual transmission. It was finished as an assembled engine on May 1 1970. F is for flint, 05 is may,01 is the 1st day and TNA is the designation for a 1970 truck with a 292 with manual transmission. Thank you so much for trying to help. I hope I can help you one day. Randy

70chevymanshort · 04-06-2011, 10:46 PM

So is my motor a 1970 also?
Posted via Mobile Device

70chevymanshort · 04-06-2011, 11:06 PM

Randy, what do you think of my engine numbers? Thanks Cade
Posted via Mobile Device

orange-orange · 04-07-2011, 08:55 AM

HI 70chevymanshort, In our trucks the 1st year that has the 3 letter engine codes is 1970, prior to that they were just 2 letters. The F is Flint, the 06 is june, and the 19 is the 19th day. I can not find the CCC engine code in my truck books but believe it is consistent with 1970 6 cylinder engine codes from GM for other models. I do think it is a 1970 and to new for my truck. If it is important to you to document its year send me the numbers and letters behind the dip stick and below the CON 2 casting. Thanks again for all of your help. PS Cade, I come out to Weiser every year... Love Idaho ! Randy

**Tmend** · 04-09-2011, 07:34 PM

Hey Orange orange. So like I said I was selling my 292 cuz I'm buying a freshly rebuild 292 to put into my 67. So I go to my boys shop to pay him what I still owe cuz I'm picking up the motor on monday. So out of the blue I remember this thread, I go look at the # and it reads F0305UH. Is that the # you are looking for I thought it was. Just wanted to share crazy how thing work out .
Posted via Mobile Device

orange-orange · 04-11-2011, 07:14 PM

Hey ! March 5th and the UH engine code ! I think I read it that this is your new engine and not the one for sale but thanks for looking ! They are out there if I can just hang in there. There is also another date code to check just behind the dipstick (under CON 2) that is a letter and a few numbers if you want to check them. Let me know and if its for sale. Thanks Randy

02-28-2011, 07:33 PM	#1
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Wtb 1968 292 engine (running or not) Want to buy a 1968 chevy 292 inline 6 engine. Prefer complete running but will buy a rebuildable core. The date and codes do matter to me. The engine codes for 292's that year I am looking for are " UH "or " UR " these were used on manual transmission trucks. If you have one please send me a PM or a post with the full engine code, condition, and price. The code is located just behind the distributor on a surfaced pad and should read something like........ F0503UH ....... Flint, month,day,engine code... 770 401-9307 if you would like to call. Thanks Randy

03-02-2011, 12:48 PM	#2
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) still looking !

03-02-2011, 01:17 PM	#3
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Wtb 1968 292 engine (running or not) I know its not what you were asking for but I have a complete 1968 250 from a manual trans truck. Was a recent rebuild but truck got wrecked and the guy took the manifolds off to put on another engine. Truck sat outside with no hood for a while and there is rust in the intake/exhaust ports. Might be good for parts for you. Free if you want it. In Raleigh NC. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-09-2011, 08:43 PM	#4
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) Hey Thank You 1972SuperCheyenne ! That is a really nice offer. I have a really cool old forestry truck that I sure would like to find an original 292 for before I invest in its rebuild. I thought it was original but found out it was replaced. Again Thanks...If I can be of any help to you with a project or part or around Atlanta let me know ! Randy

03-12-2011, 10:22 AM	#5
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) still looking ?

03-31-2011, 07:07 PM	#6
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) still looking ?

03-31-2011, 09:24 PM	#7
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: Wtb 1968 292 engine (running or not) I'll check the code on the one I know of....Should get back to you Monday or so... A......... __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959

03-31-2011, 11:27 PM	#8
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Wtb 1968 292 engine (running or not) I will be out at my shop tomorrow. I have a complete 292 out of a 68 but not sure what the codes are. Was running when i pulled it.Also have complete a/c,p/s and alternator set up off of a 68 truck I got from Tkornic. Will check and get back to you. Steve

04-01-2011, 09:25 PM	#9
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Wtb 1968 292 engine (running or not) I went out and took pictures of all the lettering on the engine. I will down load them tomorrow and post them. Been a way too long day to deal with it tonight, but wanted to let you know that i got them. Steve

04-03-2011, 09:03 PM	#10
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) Hi Steve, I just checked in and saw your message ! I look forward to your reply as I hope it and all of the accessories will work. Thanks again so much ! Randy 770 401-9307

04-03-2011, 10:29 PM	#11
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) Hello DieselEater, I look forward to your reply ! Thank you, Randy 770 401-9307 All of you are nice to help.

04-04-2011, 12:19 AM	#12
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: Wtb 1968 292 engine (running or not) OK here's what I found..... - 377129 - 712925 - CE 3 8 I forgot where the first two numbers were located, but one was on the back where the flywheel goes, stamped in, and the other was on the passenger side cast to the block. I was told this was a factory crate engine ready to go! Hope this helps... A....... __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959 Last edited by DieselEater; 04-04-2011 at 12:23 AM. Reason: Punctuation... LOL

04-05-2011, 05:58 PM	#13
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) Hello DieselEater, The 377129 casting number is a newer block made from 1973 up. This is probably a 1978 by the last number in the CE 3 8 code. I sure do thank you for posting it and I did see another member is looking for a 292 so maybe he will pick up on this thread. Thanks again, Randy

04-05-2011, 06:40 PM	#14
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,262	Re: Wtb 1968 292 engine (running or not) im selling my 292 however i think california is out of the question if not let me know and i will check the #s

04-05-2011, 07:52 PM	#15
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) Hello Tmend, Yes, Please let me know what you have ! I have been looking for a while. Thanks Randy



Register or Log In To remove these advertisements.

04-05-2011, 10:24 PM	#16
70chevymanshort Registered User Join Date: Oct 2009 Location: Rexburg, Idaho Posts: 90	Re: Wtb 1968 292 engine (running or not) Is Idaho to far for you to get a motor? Posted via Mobile Device

04-05-2011, 11:03 PM	#17
70chevymanshort Registered User Join Date: Oct 2009 Location: Rexburg, Idaho Posts: 90	Re: Wtb 1968 292 engine (running or not) I have one still in truck, I'll have to check the numbers. Posted via Mobile Device

04-06-2011, 12:05 AM	#18
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,262	Re: Wtb 1968 292 engine (running or not) Mine reads F0501TNA does that # number even look right Posted via Mobile Device

04-06-2011, 02:40 PM	#19
70chevymanshort Registered User Join Date: Oct 2009 Location: Rexburg, Idaho Posts: 90	Re: Wtb 1968 292 engine (running or not) Here are the numbers on mine, f0619ccc and 23L138256.

04-06-2011, 10:34 PM	#20
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) Hello Tmend, Your engine is a 1970 292 engine for manual transmission. It was finished as an assembled engine on May 1 1970. F is for flint, 05 is may,01 is the 1st day and TNA is the designation for a 1970 truck with a 292 with manual transmission. Thank you so much for trying to help. I hope I can help you one day. Randy

04-06-2011, 10:46 PM	#21
70chevymanshort Registered User Join Date: Oct 2009 Location: Rexburg, Idaho Posts: 90	Re: Wtb 1968 292 engine (running or not) So is my motor a 1970 also? Posted via Mobile Device

04-06-2011, 11:06 PM	#22
70chevymanshort Registered User Join Date: Oct 2009 Location: Rexburg, Idaho Posts: 90	Re: Wtb 1968 292 engine (running or not) Randy, what do you think of my engine numbers? Thanks Cade Posted via Mobile Device

04-07-2011, 08:55 AM	#23
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) HI 70chevymanshort, In our trucks the 1st year that has the 3 letter engine codes is 1970, prior to that they were just 2 letters. The F is Flint, the 06 is june, and the 19 is the 19th day. I can not find the CCC engine code in my truck books but believe it is consistent with 1970 6 cylinder engine codes from GM for other models. I do think it is a 1970 and to new for my truck. If it is important to you to document its year send me the numbers and letters behind the dip stick and below the CON 2 casting. Thanks again for all of your help. PS Cade, I come out to Weiser every year... Love Idaho ! Randy

04-09-2011, 07:34 PM	#24
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,262	Re: Wtb 1968 292 engine (running or not) Hey Orange orange. So like I said I was selling my 292 cuz I'm buying a freshly rebuild 292 to put into my 67. So I go to my boys shop to pay him what I still owe cuz I'm picking up the motor on monday. So out of the blue I remember this thread, I go look at the # and it reads F0305UH. Is that the # you are looking for I thought it was. Just wanted to share crazy how thing work out . Posted via Mobile Device

04-11-2011, 07:14 PM	#25
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Wtb 1968 292 engine (running or not) Hey ! March 5th and the UH engine code ! I think I read it that this is your new engine and not the one for sale but thanks for looking ! They are out there if I can just hang in there. There is also another date code to check just behind the dipstick (under CON 2) that is a letter and a few numbers if you want to check them. Let me know and if its for sale. Thanks Randy

Register or Log In To remove these advertisements.