FL Porterbuilt Trailing Arm Crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigsnookmaster · 03-07-2011, 10:30 PM

I have a new Porterbuilt trailing arm crossmember for sale. It is the one for the two-piece driveshaft with the carrier bearing. It is new, and was mocked up in my truck. I de-burred it where all the edges were sharp, and hand reamed the outer holes where the 3/4" bolt goes through, only because the smooth part of the bolt wouldn't go through the outside hole. The bolts fit perfect. I will take $200 plus shipping. It comes with the crossmember mounting bolt kit only. It does not come with trailing arm bolts. I can get pics in a couple of days.

nds1968 · 03-07-2011, 11:03 PM

Interested depending on shipping charges to Pittsburgh 15227 and pics. Thanks Nate

**Hart_Rod** · 03-07-2011, 11:31 PM

Greg - how about some pictures of your new setup???

bigsnookmaster · 03-07-2011, 11:33 PM

Quote:

Originally Posted by nds1968

Interested depending on shipping charges to Pittsburgh 15227 and pics. Thanks Nate

It cost me $40 to ship my new one from Porterbuilt, which I believe is in Az, to Fl. I still have this in my truck, and plan to remove it as soon as the other arrives, schedule to arrive this Thurs. I will let you know as soon as I can.This is in brand new condition, no surprises. I will get pics as soon as I can.

bigsnookmaster · 03-07-2011, 11:40 PM

Quote:

Originally Posted by Hart_Rod

Greg - how about some pictures of your new setup???

I will probably put up some pics after I get done with doing everything, and powdercoating, and all. It will be soon, I want to get it running again bad.

budnikguy · 03-08-2011, 12:54 AM

pm'd ya

**70cst** · 03-08-2011, 01:11 AM

Quote:

Originally Posted by budnikguy

pm'd ya

Please keep,all sales out in the open per rules. Thanks for your cooroperation.

budnikguy · 03-08-2011, 01:15 AM

Made an offer, was not sure if that that should be posted in open forum.. my apologies.

Quote:

Originally Posted by 70cst

Please keep,all sales out in the open per rules. Thanks for your cooroperation.

**70cst** · 03-08-2011, 01:28 AM

Quote:

Originally Posted by budnikguy

Made an offer, was not sure if that that should be posted in open forum.. my apologies.

No problem...its good to keep everything in the open. If a deal is made then that type of stuff you might want to keep behind the doors but making an offer is ok.

nds1968 · 03-08-2011, 06:56 AM

I am not in a hurry, So is the crossmember in primer, powder coating, etc..?

bigsnookmaster · 03-08-2011, 09:17 AM

The crossmemmber is still bare steel. Real nice , always inside.

bigsnookmaster · 03-09-2011, 01:37 PM

Deal pending with nds1968.

fixit-p · 03-09-2011, 01:46 PM

I'll get in line in case all other deals fall through, pending shipping to 94577

bigsnookmaster · 03-12-2011, 06:08 PM

Here's a couple of pics:

nds1968 · 03-12-2011, 07:43 PM

I'll take it

Sending PM

bigsnookmaster · 03-20-2011, 06:01 PM

Sold! Thank you!

nds1968 · 03-24-2011, 05:48 PM

Got it

Thanks Greg, Nate

03-07-2011, 10:30 PM	#1
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Porterbuilt Trailing Arm Crossmember I have a new Porterbuilt trailing arm crossmember for sale. It is the one for the two-piece driveshaft with the carrier bearing. It is new, and was mocked up in my truck. I de-burred it where all the edges were sharp, and hand reamed the outer holes where the 3/4" bolt goes through, only because the smooth part of the bolt wouldn't go through the outside hole. The bolts fit perfect. I will take $200 plus shipping. It comes with the crossmember mounting bolt kit only. It does not come with trailing arm bolts. I can get pics in a couple of days. __________________ greg http://community.webshots.com/user/68406Stepside

03-07-2011, 11:03 PM	#2
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Porterbuilt Trailing Arm Crossmember Interested depending on shipping charges to Pittsburgh 15227 and pics. Thanks Nate __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

03-07-2011, 11:31 PM	#3
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Porterbuilt Trailing Arm Crossmember Greg - how about some pictures of your new setup??? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-08-2011, 12:54 AM	#6
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Porterbuilt Trailing Arm Crossmember pm'd ya

03-08-2011, 06:56 AM	#10
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Porterbuilt Trailing Arm Crossmember I am not in a hurry, So is the crossmember in primer, powder coating, etc..? __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

03-08-2011, 09:17 AM	#11
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Porterbuilt Trailing Arm Crossmember The crossmemmber is still bare steel. Real nice , always inside. __________________ greg http://community.webshots.com/user/68406Stepside

03-09-2011, 01:37 PM	#12
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Porterbuilt Trailing Arm Crossmember Deal pending with nds1968. __________________ greg http://community.webshots.com/user/68406Stepside

03-12-2011, 06:08 PM	#14
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Porterbuilt Trailing Arm Crossmember Here's a couple of pics: Attached Images __________________ greg http://community.webshots.com/user/68406Stepside

03-12-2011, 07:43 PM	#15
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Porterbuilt Trailing Arm Crossmember I'll take it Sending PM __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

03-20-2011, 06:01 PM	#16
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Porterbuilt Trailing Arm Crossmember Sold! Thank you! __________________ greg http://community.webshots.com/user/68406Stepside

03-24-2011, 05:48 PM	#17
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Porterbuilt Trailing Arm Crossmember Got it Thanks Greg, Nate __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.