fender moulding holes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dstarrett · 03-10-2011, 06:49 AM

Looking for location of the holes for mounting the body mouldings to front fenders. I replaced mine with new and discarded the old fenders not thinking to measure the hole location. Any help would be appreciated.

fleetsidelarry · 03-11-2011, 08:42 AM

do you still need measurements?

**aerotruk63** · 03-11-2011, 01:45 PM

dstarrett · 03-11-2011, 03:13 PM

Thanks for your help guys. I was able to get the measurements off a 66 in the local boneyard. The diagram will help also. Daryl

03-10-2011, 06:49 AM	#1
dstarrett Registered User Join Date: Mar 2011 Location: fort dodge,Iowa Posts: 65	fender moulding holes Looking for location of the holes for mounting the body mouldings to front fenders. I replaced mine with new and discarded the old fenders not thinking to measure the hole location. Any help would be appreciated.

03-11-2011, 08:42 AM	#2
fleetsidelarry Senior Car Nut Join Date: Jan 2008 Location: shellman bluff, GA Posts: 1,411	Re: fender moulding holes do you still need measurements? __________________ Larry

03-11-2011, 01:45 PM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: fender moulding holes __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

03-11-2011, 03:13 PM	#4
dstarrett Registered User Join Date: Mar 2011 Location: fort dodge,Iowa Posts: 65	Re: fender moulding holes Thanks for your help guys. I was able to get the measurements off a 66 in the local boneyard. The diagram will help also. Daryl



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.