Should I rub her nose in it? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 03-12-2011, 08:44 PM

She must know she did it, right? I rubbed her nose in it, swatted her behind with a rolled up newspaper and put her outside. BAD TRUCK!

The rear trans seal started leaking bad around Nov of last year. I had to add almost a quart a week, but I kept saying "I'll fix it soon." Then the battery took a poop... I got pissed, it got cold and I started to not care.

It's been so beautiful here off and on the past few weeks I couldn't take it anymore! I fixed the seal last night and went for her first run in months. It felt good helping her stretch her legs out. Went for another cruise today... I vow to never be a lazy ass again... until the next time...

I also got my new to me subframe off the tailer for the Bird today too. Yes my finger was in the way.

bigguy69 · 03-12-2011, 09:28 PM

FRENCHBLUE72 · 03-12-2011, 10:29 PM

That will teach you to procrastinate..

rcrahn · 03-13-2011, 12:08 AM

I'm diggin that bird subframe buddy.....gotta luv them 1st gen birds

PanelDeland · 03-13-2011, 06:48 AM

If ya don't ever let her out to do her "Bidness" she will never get trained not to do that.
Glad you took care of it,they would have really given ya He77 at the GoG if you came in the furd.

Andy4639 · 03-13-2011, 06:51 AM

I did mine to but I let some one else do the dirty work for me!!!
Now I'm just trying to figure out where the intake is leaking.

67ChevyRedneck · 03-13-2011, 02:03 PM

Quote:

Originally Posted by rcrahn

I'm diggin that bird subframe buddy.....gotta luv them 1st gen birds

It's one of the nicest I had come across. Went a couple hours up into NC to get it. It came with a 100% complete, but runs like chit Pontiac 350. It even has ALL of the original heat shields AND even the original wire separators! It also has power steering... I'm only a disc brake kit and 2" drop springs from what I want

It's a '69 and I paid a whopping $250 for all of it. I was so giddy that day

I was trying to find one at the autofair last year and it was a lot of overpriced crap. One guy wanted $500 for completely bare ones (no suspension, frame ONLY) but they had been stripped and painted... big deal, right? Getting covered in grease and rust dust is 1/2 the fun, isn't it???

Yeah yeah yeah... I know fellas. I just don't function well in the cold and I have no shame in driving a 305HP 31mpg bad ass Furd

The truck actually spent her first night outside since I drove her to Tennessee in spring 2009??? Landscaping mulch and garage cleaning are on the list today. It's 73 and sunny. Gotta love the south!

Andy, is it leaking fluid or vacuum leak?

Andy4639 · 03-13-2011, 02:18 PM

It's leaking oil. Had r/m done 2 weeks ago. Now I'm trying to figure out where the leak is. I cleaned the back side of the motor and behind the dizzy. Hope I can figure out where. I may just do the intake deal and forget about it. I pretty sure thats where it is. Passenger side at the head. Oil is running down block and dripping off the starter bolts.

gcburdic · 03-13-2011, 03:09 PM

bout time you got that seal fixed...she'll be ready for the GOG trip now

67ChevyRedneck · 03-13-2011, 03:46 PM

I hope so! I still have to clean the carb (yay) and change the thermostat (leaking around seal, might as well swap it now). Fun.

Surprised you didn't comment on me, yet again, stealing more good parts from NC

gcburdic · 03-13-2011, 08:46 PM

Quote:

Originally Posted by 67ChevyRedneck

Surprised you didn't comment on me, yet again, stealing more good parts from NC

Yay...you didn't even call!!!...i mean you were pretty close to my house!!!

67ChevyRedneck · 03-13-2011, 09:13 PM

Now I feel bad.

Autofair and goofs soon!

03-12-2011, 08:44 PM	#1
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Should I rub her nose in it? She must know she did it, right? I rubbed her nose in it, swatted her behind with a rolled up newspaper and put her outside. BAD TRUCK! The rear trans seal started leaking bad around Nov of last year. I had to add almost a quart a week, but I kept saying "I'll fix it soon." Then the battery took a poop... I got pissed, it got cold and I started to not care. It's been so beautiful here off and on the past few weeks I couldn't take it anymore! I fixed the seal last night and went for her first run in months. It felt good helping her stretch her legs out. Went for another cruise today... I vow to never be a lazy ass again... until the next time... I also got my new to me subframe off the tailer for the Bird today too. Yes my finger was in the way. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-12-2011, 09:28 PM	#2
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Should I rub her nose in it? __________________ members met: redbaron69, billsbowtie,nc67 Last edited by bigguy69; 03-12-2011 at 09:28 PM.

03-12-2011, 10:29 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Should I rub her nose in it? That will teach you to procrastinate.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-13-2011, 12:08 AM	#4
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: Should I rub her nose in it? I'm diggin that bird subframe buddy.....gotta luv them 1st gen birds

03-13-2011, 06:48 AM	#5
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Should I rub her nose in it? If ya don't ever let her out to do her "Bidness" she will never get trained not to do that. Glad you took care of it,they would have really given ya He77 at the GoG if you came in the furd. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

03-13-2011, 06:51 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Should I rub her nose in it? I did mine to but I let some one else do the dirty work for me!!! Now I'm just trying to figure out where the intake is leaking. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-13-2011, 02:18 PM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Should I rub her nose in it? It's leaking oil. Had r/m done 2 weeks ago. Now I'm trying to figure out where the leak is. I cleaned the back side of the motor and behind the dizzy. Hope I can figure out where. I may just do the intake deal and forget about it. I pretty sure thats where it is. Passenger side at the head. Oil is running down block and dripping off the starter bolts. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-13-2011, 03:09 PM	#9
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Should I rub her nose in it? bout time you got that seal fixed...she'll be ready for the GOG trip now __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

03-13-2011, 03:46 PM	#10
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Should I rub her nose in it? I hope so! I still have to clean the carb (yay) and change the thermostat (leaking around seal, might as well swap it now). Fun. Surprised you didn't comment on me, yet again, stealing more good parts from NC __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-13-2011, 09:13 PM	#12
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Should I rub her nose in it? Now I feel bad. Autofair and goofs soon! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.