New Motor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

miket · 03-19-2003, 09:58 PM

My motor came today....YEAH!!!!!

So leave the valve covers or go with chrome?

70c10 · 03-19-2003, 10:04 PM

Mike, that looks awesome. Keep those valve covers!

1969 GMC · 03-19-2003, 10:22 PM

Forget chrome, those look sweet!

And fast, too...I bet you get an additional 10-15 rear wheel HP with those bad boys

67cst · 03-19-2003, 10:29 PM

that is probably the most gorgeous thing ive ever seen..actually it is

DanoDMano · 03-19-2003, 10:42 PM

Mike, that thing makes me sick!!! (With envy)

You gotta let me see it when you are done.

**Palf70Step** · 03-19-2003, 10:45 PM

Keep em. Man that looks sooooooooooooooooooo nice!!

miket · 03-19-2003, 10:51 PM

Dano,

I will let you drive it!!!!!!!

cali_surfer · 03-19-2003, 10:55 PM

I want a 502!!!

UNCLEBOB · 03-19-2003, 11:28 PM

A guy racing a swb pro street truck over here in bremerton was running 12.50s with a 450 hp 502 last year. Your going to have to much fun!

*racedvl* · 03-19-2003, 11:32 PM

Chrome does not dissapate heat very good at all, and leaks, and will rust later down the road. Those covers are sooo much better than chrome, and look wayyy better.

barn9 · 03-19-2003, 11:39 PM

What racedvl said! Those are a LOT better than chrome.

miket · 03-19-2003, 11:44 PM

okay it's done!! My primary colors in the engine compartment will be black, aluminum and red.

crazy longhorn · 03-19-2003, 11:56 PM

dddd@mn.....me likes that!

neonlarry · 03-19-2003, 11:56 PM

Quote:

My primary colors in the engine compartment will be black, aluminum and red.

That's what I am planning to do too. Not with a 502 though, lol. Looks nice

Longhorn Man · 03-20-2003, 01:02 AM

Keep those covers, chrome is temparary...alluminum fins are for ever.
Details on the off brand hot rod in the back ground?

miket · 03-20-2003, 01:07 AM

Longhornmail:

That there is a GT350...NOT MINE. A friend of mine is doing the engine swap for me (with assistance from Mr Franklin) and he is working on it.....what was really interesting was an older Datsun 280 Z that was on jackstands with no motor and tranny. Though, I was shown around the corner a new ZZ4 crate motor that was being prepped for install into the Z...

I am a Chevy guy as you can tell by my signature.

69 Short Fleet · 03-20-2003, 01:07 AM

BEAUTIFUL MOTOR!!!!!!!! I'd keep the valve covers

72ChevyCheyenne · 03-20-2003, 08:00 AM

Here is a pic of mine in the chassis.

Long Knight · 03-20-2003, 10:46 AM

That looks amazing! Never seen a 502. Sooo, how many pennies would I have to save to get one of those to put in a Vega?

**1970 CST Short Wide** · 03-20-2003, 11:09 AM

I like it AS IS, Looks great , wish it was in my truck

Blue Beard · 03-20-2003, 01:33 PM

Is that a grate motor available from GM.....?

I've been thinking of the Fuel Injection unit............

miket · 03-20-2003, 01:35 PM

Blue Beard:

It is a crate motor from GM. I bought it from Larry at Sallee Chevy in Milton Freewater in OR. They have a fuel injected version of this motor called a 502 RAMJET. It includes everything you need computer and harness....pricey but what the hey.

Blue Beard · 03-20-2003, 01:42 PM

Mike

Thanks, I'' look that up...............I'm just east of Portland on the Washington side..........

Should be able to find one at a local dealer...............

Jason71k10 · 03-20-2003, 02:06 PM

that is frickin sweet, miket!!!

have i mentioned that I HATE YOU!!!!!!!!

J/K

i'd keep those covers, chrome would look too cheesy on that sweet engine IMO
Jason

1972chevy4x4 · 03-20-2003, 02:07 PM

Man those covers make crome look silly. Nice motor

03-19-2003, 09:58 PM	#1
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	New Motor My motor came today....YEAH!!!!! So leave the valve covers or go with chrome? Attached Images __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

03-19-2003, 10:04 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Mike, that looks awesome. Keep those valve covers! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-19-2003, 10:22 PM	#3
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	Forget chrome, those look sweet! And fast, too...I bet you get an additional 10-15 rear wheel HP with those bad boys __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

03-19-2003, 10:29 PM	#4
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,303	that is probably the most gorgeous thing ive ever seen..actually it is __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

03-19-2003, 10:42 PM	#5
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Mike, that thing makes me sick!!! (With envy) You gotta let me see it when you are done. __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

03-19-2003, 10:45 PM	#6
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,901	Keep em. Man that looks sooooooooooooooooooo nice!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-19-2003, 10:51 PM	#7
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	Dano, I will let you drive it!!!!!!! __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

03-19-2003, 10:55 PM	#8
cali_surfer Registered User Join Date: Jun 2000 Location: Chico, CA Posts: 1,136	I want a 502!!! __________________ My engine is stock... trust me ;o)

03-19-2003, 11:28 PM	#9
UNCLEBOB Registered User Join Date: May 2000 Location: bremerton wa 98310 Posts: 100	A guy racing a swb pro street truck over here in bremerton was running 12.50s with a 450 hp 502 last year. Your going to have to much fun! __________________ 68 lwb 383 solid roller,250dur, 582lift, afr 210s, 10.8 comp. edel.rpm, 750vs,1 3/4 headers turbo 400, 3500 stall,ford 9 inch 3.89 gears

03-19-2003, 11:32 PM	#10
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Chrome does not dissapate heat very good at all, and leaks, and will rust later down the road. Those covers are sooo much better than chrome, and look wayyy better.

03-19-2003, 11:39 PM	#11
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	What racedvl said! Those are a LOT better than chrome. __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

03-19-2003, 11:44 PM	#12
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	okay it's done!! My primary colors in the engine compartment will be black, aluminum and red. __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

03-19-2003, 11:56 PM	#13
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	dddd@mn.....me likes that!

03-20-2003, 01:02 AM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Keep those covers, chrome is temparary...alluminum fins are for ever. Details on the off brand hot rod in the back ground?

03-20-2003, 01:07 AM	#16
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	Longhornmail: That there is a GT350...NOT MINE. A friend of mine is doing the engine swap for me (with assistance from Mr Franklin) and he is working on it.....what was really interesting was an older Datsun 280 Z that was on jackstands with no motor and tranny. Though, I was shown around the corner a new ZZ4 crate motor that was being prepped for install into the Z... I am a Chevy guy as you can tell by my signature. __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection



Register or Log In To remove these advertisements.

03-20-2003, 01:07 AM	#17
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	BEAUTIFUL MOTOR!!!!!!!! I'd keep the valve covers

03-20-2003, 08:00 AM	#18
72ChevyCheyenne Registered User Join Date: May 2002 Location: Woodstock, GA USA Posts: 300	Keep the covers Here is a pic of mine in the chassis. Attached Images __________________ Bill Durham http://home.attbi.com/~bulldurham 72 Cheyenne Restoration in progress Currently: frame sand blasted and powdercoated, Inline Tube brake and fuel lines, Blazer tank in rear, Holley Red electronic fuel pump, Eaton posi with 3.42 gears, 2 1/2" drop front spindles, 4" drop rear springs with adjustable panhard bar, KYB shocks, ZZ 502/502 GM Performance crate engine, Zoops brackets and pulleys, Vintage Air, dual electric fans, Ram Air II hood and late model sport side bed.

03-20-2003, 10:46 AM	#19
Long Knight Spank 'em if you got 'em! Join Date: Nov 2002 Location: Kansas City Posts: 628	That looks amazing! Never seen a 502. Sooo, how many pennies would I have to save to get one of those to put in a Vega? __________________ Long Knight '71 C-20, 350ci, TH350, Edl. 1406 Carb w/elec.choke, Ignitor ignition, Viper Tires, Orange Dipstick

03-20-2003, 11:09 AM	#20
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,139	I like it AS IS, Looks great , wish it was in my truck __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

03-20-2003, 01:33 PM	#21
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Is that a grate motor available from GM.....? I've been thinking of the Fuel Injection unit............ __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

03-20-2003, 01:35 PM	#22
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	Blue Beard: It is a crate motor from GM. I bought it from Larry at Sallee Chevy in Milton Freewater in OR. They have a fuel injected version of this motor called a 502 RAMJET. It includes everything you need computer and harness....pricey but what the hey. __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

03-20-2003, 01:42 PM	#23
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Mike Thanks, I'' look that up...............I'm just east of Portland on the Washington side.......... Should be able to find one at a local dealer............... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

03-20-2003, 02:06 PM	#24
Jason71k10 ready for reassembly Join Date: Jun 2002 Location: Barrie ONT, Canada Posts: 413	that is frickin sweet, miket!!! have i mentioned that I HATE YOU!!!!!!!! J/K i'd keep those covers, chrome would look too cheesy on that sweet engine IMO Jason __________________ stock 71 4x4 2003 Jeep Liberty, rocky mountain edition I'm obsessed, and wouldn't have it any other way!

03-20-2003, 02:07 PM	#25
1972chevy4x4 Registered User Join Date: Feb 2003 Location: Wichita Kansas Posts: 223	Man those covers make crome look silly. Nice motor __________________ 1972 chevy k10 4x4 longbed 4-inch lift, 3.73 front/rears, frame off nearly complete 1972 chevy k10 4x4 longbed parts truck, known as the "ugly green machine" 1990 GMC 3/4 shortbed ext cab Always in need of 67-72 parts in central ks.

Register or Log In To remove these advertisements.