CA Parting 72 GMC SIERRA 1500 2WD - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 03-14-2011, 03:32 PM

I have a GMC that is going to be parted this week. The sheet metal is rusted and no good, the cab is rusted, the seat is junk, and the vent windows are dinged up. The radio is sold. The back end will be made into a trailer. I will give 2 days from the time I answer a question on a part and then it goes to next in line. Paypal and MO is good and I usually ship out on Fridays. Please respond in thread to avoid confusion.
Thanks, Ray

front disc brake setup- $150 local
cargo light- $35 shipped SOLD
dual horns with wire- $32 shipped
Sierra 1500 fender emblems- $26 shipped pair
2 barrel carb- $30 shipped
distributor- $22 shipped
power steering pump, brackets, box, hoses- $100 plus shipping SOLD
exhaust manifolds- $60 plus shipping
brake booster, brackets, prop valve- $50 plus shipping SOLD...I have another one
auto steering column- $50 plus shipping
AT cross member- $25 plus shipping
jack- $30 shipped
driver side head light bezel- $22 shipped
grill support- $10 plus shipping
smog cannister- $15 plus shipping
engine bay wiring harness (headlights) not carved up- $25 plus shipping
headlight rings- $10 plus shipping
7 blade fan- $15 plus shipping SOLD
front cab support frame brackets- $26 shipped pair
deluxe front side marker lenses- $16 shipped pair
vent windows- $25 plus shipping pair (not show truck)

I'm going to try to test fire the engine/trans today to see if there is any hope for them.

hector68 · 03-14-2011, 03:37 PM

interested in the power brake booster. pending on pics thanks

hector68 · 03-14-2011, 03:38 PM

and brackets also sorry. shipped to 77521 pending on pics

KrazyRay · 03-14-2011, 03:44 PM

pics

KrazyRay · 03-14-2011, 03:58 PM

more

jays68yak · 03-14-2011, 04:05 PM

how badly rusted is the floor and lower part of the firewall? I need some patch panels.

KrazyRay · 03-14-2011, 04:08 PM

Quote:

Originally Posted by hector68

and brackets also sorry. shipped to 77521 pending on pics

The booster, etc is $75 shipped tp TX.
Thanks, Ray

KrazyRay · 03-14-2011, 04:11 PM

Quote:

Originally Posted by jays68yak

how badly rusted is the floor and lower part of the firewall? I need some patch panels.

I have a few cabs that will take care of your patch panel needs.
Thanks, Ray

jays68yak · 03-14-2011, 04:23 PM

Quote:

Originally Posted by KrazyRay

I have a few cabs that will take care of your patch panel needs.
Thanks, Ray

sweet Ill send you some pics later on to see what you can do for me.

JORGIE95961 · 03-14-2011, 04:27 PM

how bad is the dirvers side of the rad support and how much for local pickup?

missinfishin10 · 03-14-2011, 04:31 PM

I'll take the 2 SIERRA emblems.

fwells67 · 03-14-2011, 04:35 PM

interested in the glove box door and the gas pedal and bracket. could you post a pic.

dozerman · 03-14-2011, 04:38 PM

How bad is the bed rusted?

dan s · 03-14-2011, 04:40 PM

I am interested in the upper body side trim,upper taigate trim as well as cab paint divider trim pending price shipped and some pics. Thanks Dan.

JORGIE95961 · 03-14-2011, 04:47 PM

Quote:

Originally Posted by dozerman

How bad is the bed rusted?

i think hes using the bed for a trailer

sjarrett71 · 03-14-2011, 05:48 PM

If it's a TH400 trans, how much for the kickdown switch with all the wiring? I don't need the pedal assy, just the switch and complete wiring. Shipped to Rolla, MO 65401?

72Much · 03-14-2011, 06:21 PM

I need the brake booster to firewall bracket and linkage to 38059.
Posted via Mobile Device

72gmcer · 03-14-2011, 06:42 PM

How much for the steering box and pitman arm separate?
Posted via Mobile Device

KrazyRay · 03-14-2011, 08:11 PM

JORGIE95961- The support has heavy rust, but not rusted through $60 to your door

missinfishin10- I will pull and make sure the studs are good.

fwells67- gas pedal assembly with cable and carb bracket, and glove box lid $50 shipped

dozerman- I have a nice long bed with great floor $350

dan s- Do you need fender spears, door trim, and bed trim?

sjarrett71- It looks to have kickdown switch, but its a th350...I will check further.

72Much- I have some loose brackets with linkage $38 shipped (if you don't need booster)

72 gmcer- $62 shipped for ps box with pitman.

I will post more pics as I pull parts.
Thanks,
Ray

68lowburb · 03-14-2011, 08:16 PM

how much for water pump pulley and crank pulleies shipped to 70737 thanks jimmy

dan s · 03-14-2011, 08:23 PM

Ray,yes I need all of that plus the small pieces behind the doors on the cab. Thanks Dan

fwells67 · 03-14-2011, 08:26 PM

i will take it . gas pedal with bracket, cable and carb bracket and glove box. could you post a pic of the front of the glove box and the gas pedal.thanks

ewoody625 · 03-14-2011, 08:27 PM

Ray
I need a patch for the driver side cab corner up to just below the door latch the whole section. I can get a pic if needed. how much shipped to 46383 if you have one?
Thanks
Eric

sjarrett71 · 03-14-2011, 08:49 PM

Also how are the window regulators?

otsenre · 03-14-2011, 08:56 PM

Cargo lamp if not pitted

03-14-2011, 03:32 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 72 GMC SIERRA 1500 2WD I have a GMC that is going to be parted this week. The sheet metal is rusted and no good, the cab is rusted, the seat is junk, and the vent windows are dinged up. The radio is sold. The back end will be made into a trailer. I will give 2 days from the time I answer a question on a part and then it goes to next in line. Paypal and MO is good and I usually ship out on Fridays. Please respond in thread to avoid confusion. Thanks, Ray front disc brake setup- $150 local cargo light- $35 shipped SOLD dual horns with wire- $32 shipped Sierra 1500 fender emblems- $26 shipped pair 2 barrel carb- $30 shipped distributor- $22 shipped power steering pump, brackets, box, hoses- $100 plus shipping SOLD exhaust manifolds- $60 plus shipping brake booster, brackets, prop valve- $50 plus shipping SOLD...I have another one auto steering column- $50 plus shipping AT cross member- $25 plus shipping jack- $30 shipped driver side head light bezel- $22 shipped grill support- $10 plus shipping smog cannister- $15 plus shipping engine bay wiring harness (headlights) not carved up- $25 plus shipping headlight rings- $10 plus shipping 7 blade fan- $15 plus shipping SOLD front cab support frame brackets- $26 shipped pair deluxe front side marker lenses- $16 shipped pair vent windows- $25 plus shipping pair (not show truck) I'm going to try to test fire the engine/trans today to see if there is any hope for them. Attached Images Last edited by KrazyRay; 03-27-2011 at 11:18 AM.

03-14-2011, 03:37 PM	#2
hector68 Registered User Join Date: Feb 2011 Location: baytown, tx Posts: 84	Re: Parting 72 GMC SIERRA 1500 2WD interested in the power brake booster. pending on pics thanks

03-14-2011, 03:38 PM	#3
hector68 Registered User Join Date: Feb 2011 Location: baytown, tx Posts: 84	Re: Parting 72 GMC SIERRA 1500 2WD and brackets also sorry. shipped to 77521 pending on pics

03-14-2011, 03:44 PM	#4
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 72 GMC SIERRA 1500 2WD pics Attached Images

03-14-2011, 03:58 PM	#5
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 72 GMC SIERRA 1500 2WD more Attached Images

03-14-2011, 04:05 PM	#6
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Re: Parting 72 GMC SIERRA 1500 2WD how badly rusted is the floor and lower part of the firewall? I need some patch panels. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

03-14-2011, 04:27 PM	#10
JORGIE95961 Registered User Join Date: Feb 2011 Location: OLIVEHURST CA Posts: 570	Re: Parting 72 GMC SIERRA 1500 2WD how bad is the dirvers side of the rad support and how much for local pickup?

03-14-2011, 04:31 PM	#11
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: Parting 72 GMC SIERRA 1500 2WD I'll take the 2 SIERRA emblems. __________________ 71 LWB Fleetside 1950 3100 Original Project!

03-14-2011, 04:35 PM	#12
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: Parting 72 GMC SIERRA 1500 2WD interested in the glove box door and the gas pedal and bracket. could you post a pic.

03-14-2011, 04:38 PM	#13
dozerman Registered User Join Date: Dec 2010 Location: Groveland ca Posts: 224	Re: Parting 72 GMC SIERRA 1500 2WD How bad is the bed rusted?

03-14-2011, 04:40 PM	#14
dan s Registered User Join Date: Jan 2010 Location: Ormond Beach Florida Posts: 156	Re: Parting 72 GMC SIERRA 1500 2WD I am interested in the upper body side trim,upper taigate trim as well as cab paint divider trim pending price shipped and some pics. Thanks Dan.

03-14-2011, 05:48 PM	#16
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Parting 72 GMC SIERRA 1500 2WD If it's a TH400 trans, how much for the kickdown switch with all the wiring? I don't need the pedal assy, just the switch and complete wiring. Shipped to Rolla, MO 65401? __________________ -Scott-

03-14-2011, 06:21 PM	#17
72Much Registered User Join Date: Nov 2006 Location: Newbern, Tn. Posts: 36	Re: Parting 72 GMC SIERRA 1500 2WD I need the brake booster to firewall bracket and linkage to 38059. Posted via Mobile Device

03-14-2011, 06:42 PM	#18
72gmcer Registered User Join Date: Dec 2010 Location: Pasadena, Tx Posts: 29	Re: Parting 72 GMC SIERRA 1500 2WD How much for the steering box and pitman arm separate? Posted via Mobile Device

03-14-2011, 08:11 PM	#19
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 72 GMC SIERRA 1500 2WD JORGIE95961- The support has heavy rust, but not rusted through $60 to your door missinfishin10- I will pull and make sure the studs are good. fwells67- gas pedal assembly with cable and carb bracket, and glove box lid $50 shipped dozerman- I have a nice long bed with great floor $350 dan s- Do you need fender spears, door trim, and bed trim? sjarrett71- It looks to have kickdown switch, but its a th350...I will check further. 72Much- I have some loose brackets with linkage $38 shipped (if you don't need booster) 72 gmcer- $62 shipped for ps box with pitman. I will post more pics as I pull parts. Thanks, Ray



Register or Log In To remove these advertisements.

03-14-2011, 08:16 PM	#20
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: Parting 72 GMC SIERRA 1500 2WD how much for water pump pulley and crank pulleies shipped to 70737 thanks jimmy

03-14-2011, 08:23 PM	#21
dan s Registered User Join Date: Jan 2010 Location: Ormond Beach Florida Posts: 156	Re: Parting 72 GMC SIERRA 1500 2WD Ray,yes I need all of that plus the small pieces behind the doors on the cab. Thanks Dan

03-14-2011, 08:26 PM	#22
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: Parting 72 GMC SIERRA 1500 2WD i will take it . gas pedal with bracket, cable and carb bracket and glove box. could you post a pic of the front of the glove box and the gas pedal.thanks

03-14-2011, 08:27 PM	#23
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: Parting 72 GMC SIERRA 1500 2WD Ray I need a patch for the driver side cab corner up to just below the door latch the whole section. I can get a pic if needed. how much shipped to 46383 if you have one? Thanks Eric __________________ Eric 70 CST10 long bed in pieces also factory air and cruise(the project) 18 Silverado crew cab 5.3 4x4 My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166

03-14-2011, 08:49 PM	#24
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Parting 72 GMC SIERRA 1500 2WD Also how are the window regulators? __________________ -Scott-

03-14-2011, 08:56 PM	#25
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: Parting 72 GMC SIERRA 1500 2WD Cargo lamp if not pitted

Register or Log In To remove these advertisements.