inline 6 questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CrazyJesster · 03-21-2011, 08:22 PM

so im thinking about looking at a 67 step side chevy. its got the inline 6 with 3 on the tree and it runs and drives as is. i have not seen this truck yet i have only spoken to the person.

yeah i have an 82 swb its not running but i love the style of 67 through 72 trucks.

so what kind of hastle is it swaping a 400 sb into this ride?

and maybe doing a floor mount shifter what kind of trannys did they have?

the price of this vehicle is 2800$ or best offer

71meangreenc10 · 03-21-2011, 08:36 PM

It depends on how you want your ride to look, if you want it right, you have to get all the right parts to put the v8 in the right position, if you dont care about that and dont mind the valve covers almost against the firewall, then it will go straight in with little effort.

I used the flywheel and starter off the 6 on my 283 with no problems....

Smitty

CrazyJesster · 03-21-2011, 08:40 PM

what do parts run for something like this swap?

**LockDoc** · 03-21-2011, 09:12 PM

Quote:

Originally Posted by CrazyJesster

what do parts run for something like this swap?

That's kind of hard to answer without knowing what trans the 400 had or has on it and more info about what you are looking to end up with. Too many variables.

If you want to leave the 3 speed in it just slide the 400 in and bolt it up. It will bolt right up to the 3 speed bell housing and you can use all of your current clutch stuff. I think you will have to use a 400 flywheel because they are externally balanced. If you use a Chevy 327 or 350 you can use your existing flywheel and just buy a new pilot bushing.

LockDoc

CrazyJesster · 03-21-2011, 09:32 PM

the 400 i have a turbo 350 with it. but if i got the truck id want ot keep the 3 speed

and put the shifter in the floor

JasonBird · 03-21-2011, 09:45 PM

hey there Jester, i have a 67 that had a I6 in it and i'm swapping to a 350. i'm using the v8 stands from a 67 and the 67 style motor mounts. if it's all the right parts, the stands will bolt right on in the forward position with no hole drilling required. tex firefighter has a good thread in FAQ that has good pictures of what i'm talking about, definately check it out....good luck!

http://67-72chevytrucks.com/vboard/s...d.php?t=442919

here's a link...
Jason

CrazyJesster · 03-21-2011, 09:50 PM

yeah im just trying to see what kind of issues id have an how big of a problem this might be. i have not bought the ride yet and i may not. i jsut got a loan to help my credit get better. and just playing outsome options but the 82 is gonna take lot of work. i guess i need to go look at this 67 first before nay decison is made.

03-21-2011, 08:22 PM	#1
CrazyJesster Registered User Join Date: Feb 2003 Location: Abilene Texas Posts: 557	inline 6 questions so im thinking about looking at a 67 step side chevy. its got the inline 6 with 3 on the tree and it runs and drives as is. i have not seen this truck yet i have only spoken to the person. yeah i have an 82 swb its not running but i love the style of 67 through 72 trucks. so what kind of hastle is it swaping a 400 sb into this ride? and maybe doing a floor mount shifter what kind of trannys did they have? the price of this vehicle is 2800$ or best offer

03-21-2011, 08:36 PM	#2
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: inline 6 questions It depends on how you want your ride to look, if you want it right, you have to get all the right parts to put the v8 in the right position, if you dont care about that and dont mind the valve covers almost against the firewall, then it will go straight in with little effort. I used the flywheel and starter off the 6 on my 283 with no problems.... Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

03-21-2011, 08:40 PM	#3
CrazyJesster Registered User Join Date: Feb 2003 Location: Abilene Texas Posts: 557	Re: inline 6 questions what do parts run for something like this swap?

03-21-2011, 09:32 PM	#5
CrazyJesster Registered User Join Date: Feb 2003 Location: Abilene Texas Posts: 557	Re: inline 6 questions the 400 i have a turbo 350 with it. but if i got the truck id want ot keep the 3 speed and put the shifter in the floor

03-21-2011, 09:45 PM	#6
JasonBird '67 C-10 LWB Driver Join Date: Dec 2010 Location: Andover, Kansas Posts: 380	Re: inline 6 questions hey there Jester, i have a 67 that had a I6 in it and i'm swapping to a 350. i'm using the v8 stands from a 67 and the 67 style motor mounts. if it's all the right parts, the stands will bolt right on in the forward position with no hole drilling required. tex firefighter has a good thread in FAQ that has good pictures of what i'm talking about, definately check it out....good luck! http://67-72chevytrucks.com/vboard/s...d.php?t=442919 here's a link... Jason __________________ '67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad! Last edited by JasonBird; 03-21-2011 at 10:00 PM.

03-21-2011, 09:50 PM	#7
CrazyJesster Registered User Join Date: Feb 2003 Location: Abilene Texas Posts: 557	Re: inline 6 questions yeah im just trying to see what kind of issues id have an how big of a problem this might be. i have not bought the ride yet and i may not. i jsut got a loan to help my credit get better. and just playing outsome options but the 82 is gonna take lot of work. i guess i need to go look at this 67 first before nay decison is made.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.