need a little bit of help please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dieseltech · 03-22-2011, 02:34 PM

a few moths back I purchased a 1986 chevy wrangler 4x4 the one of the PO's of the truck had it lifted. I was wondering if someone would be willing to measure from the center of the front hub to the lip of the fender so I can can have a reference point to help me determine exactly how much of a lift I have. The truck has 1/2 ton axles. Thanks in advance

Craig

87GMCChris · 03-22-2011, 03:36 PM

Lets see what your truck looks like... Cause I got a wrangler too. Mines two tone, but sorry to say 2wd

Although I have been through bobcaygeon a couple times on a house boat.

dieseltech · 03-22-2011, 04:45 PM

My paint isn't as good as yours.....when i bought the truck the po completely redone the interior, new rotors, pads, calipers, drums, shoes, wheel cylinders, brake lines, new passenger fuel tank, new fuel lines, new inner fenders, cab corners, door sils, floors, gauges....also came with a gun rack.....thats was the deal closer! her are some pics of mine
Name: IMG00026-20101109-1119.jpg
Views: 69
Size: 66.1 KB

Name: IMG00026-20101109-1119.jpg
Views: 69
Size: 66.1 KB

Name: IMG00032-20101109-1121.jpg
Views: 69
Size: 65.3 KB

Name: IMG00027-20101109-1119.jpg
Views: 76
Size: 52.4 KB

b454rat · 03-22-2011, 07:39 PM

The 235s throws it off, but could be a 4" lift. Look for a block in the rear.

1LowToy · 03-22-2011, 08:02 PM

Nice truck you picked up there.

I'd really like to have a gun rack for my lowrider

That would do it for all the locals around here

dieseltech · 03-22-2011, 10:39 PM

thanks for the comments.... mine measures 26.5" from the center of the hub to the lip of the fender....b454rat there is a 4" block in the back but it also looks like there might be an add a leaf in there as well....yes the 235's do throw it off... looking to put 35's on it this summer

03-22-2011, 02:34 PM	#1
dieseltech Registered User Join Date: Jun 2010 Location: Bobcaygeon,Ontario CANADA Posts: 126	need a little bit of help please a few moths back I purchased a 1986 chevy wrangler 4x4 the one of the PO's of the truck had it lifted. I was wondering if someone would be willing to measure from the center of the front hub to the lip of the fender so I can can have a reference point to help me determine exactly how much of a lift I have. The truck has 1/2 ton axles. Thanks in advance Craig __________________ 1986 Chevy Wrangler 4x4 305/700r4 6" lift 37x14.50x15

03-22-2011, 03:36 PM	#2
87GMCChris Registered User Join Date: May 2010 Location: London, Ontairio Posts: 163	Re: need a little bit of help please Lets see what your truck looks like... Cause I got a wrangler too. Mines two tone, but sorry to say 2wd Although I have been through bobcaygeon a couple times on a house boat. Attached Images __________________ 1987 GMC Wrangler - 305TBI/TH400/Duals 1968 Camaro - Resto 2010 Ranger I only drive truck 6 months a year... Dam Canadian winters.

03-22-2011, 04:45 PM	#3
dieseltech Registered User Join Date: Jun 2010 Location: Bobcaygeon,Ontario CANADA Posts: 126	Re: need a little bit of help please My paint isn't as good as yours.....when i bought the truck the po completely redone the interior, new rotors, pads, calipers, drums, shoes, wheel cylinders, brake lines, new passenger fuel tank, new fuel lines, new inner fenders, cab corners, door sils, floors, gauges....also came with a gun rack.....thats was the deal closer! her are some pics of mine __________________ 1986 Chevy Wrangler 4x4 305/700r4 6" lift 37x14.50x15 Last edited by dieseltech; 03-22-2011 at 04:46 PM.

03-22-2011, 07:39 PM	#4
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,461	Re: need a little bit of help please The 235s throws it off, but could be a 4" lift. Look for a block in the rear. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

03-22-2011, 08:02 PM	#5
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	Re: need a little bit of help please Nice truck you picked up there. I'd really like to have a gun rack for my lowrider That would do it for all the locals around here

03-22-2011, 10:39 PM	#6
dieseltech Registered User Join Date: Jun 2010 Location: Bobcaygeon,Ontario CANADA Posts: 126	Re: need a little bit of help please thanks for the comments.... mine measures 26.5" from the center of the hub to the lip of the fender....b454rat there is a 4" block in the back but it also looks like there might be an add a leaf in there as well....yes the 235's do throw it off... looking to put 35's on it this summer __________________ 1986 Chevy Wrangler 4x4 305/700r4 6" lift 37x14.50x15 Last edited by dieseltech; 03-22-2011 at 11:16 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.