|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-23-2011, 09:18 AM
|
#1 |
|
Registered User
Join Date: Apr 2010
Location: Newcastle, OK
Posts: 1,344
|
Need a pic from a later model crew cab, like around 90' or so.
I need an under hood shot of the top of the motor. Truck needs to have a 454 and the large 4 core radiator that is offset to one side. Similar to the 6.2 deisel radiators.
What I am particularly looking for is the what the water neck and upper radiator hose look like. Thanks for any help. Posted via Mobile Device |
|
|
|
03-24-2011, 12:48 AM
|
#2 |
|
Registered User
Join Date: Feb 2009
Location: washington the state
Posts: 730
|
Re: Need a pic from a later model crew cab, like around 90' or so.
if Im right you have the big 4 core rad its longer then the regular 4core thats what was suppose to be in mine but some brain child used a rad out of a 88 an newer std cab. so piced mine together with the smaller 4core are you having problems finding the right upper hose if so I think I still have one hanging in my shop I'll grab the part# off of it for you
__________________
my sports car rolls on six wheels only because I'm to fat to get in and out of new corvette http://hubgarage.s3.amazonaws.com/ph...ped_detail.JPG |
|
|
|
|
03-24-2011, 09:59 AM
|
#3 |
|
Registered User
Join Date: Apr 2010
Location: Newcastle, OK
Posts: 1,344
|
Re: Need a pic from a later model crew cab, like around 90' or so.
Yes, that is the radiator I am using. What I am doing is this. I am dropping a 454 in my 1/2 ton so I wanted that big radiator to make sure cooling would be good.
I also am putting a serp setup off of an early 90's 350 on it using an adapter kit from Kwik Performance. I was wanting to see which shape the water neck and hose were on a 454 with the large radiator so I could tell if it will clear the serp setup. Posted via Mobile Device |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
