factory tach w/fuel gauge ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jitteryguy · 04-02-2011, 01:17 PM

factory tach with fuel gauge biult in ? plus a vacum gauge ? what would this have come out of ? a buddy of mine wants to get it .

http://cgi.ebay.com/ebaymotors/73-75...Q5fAccessories

bigd65 · 04-02-2011, 01:41 PM

I dont but there is an excellant write up on here about the very same cluster

48cj2a · 04-02-2011, 01:55 PM

medium duty trucks like the C60 C70

RandyP · 04-02-2011, 02:51 PM

And an amp gauge. I smell a fire in someones future if they are not pretty versed in these old trucks.

Gyawo · 04-02-2011, 04:11 PM

I am liking that tach w/fuel gauge. Might have to start looking for one of those.

K30_dump · 04-02-2011, 05:26 PM

Hello,

Definitely a sweet looking cluster. I bought one a while back for my K30 project (still in progress

). I believe mine has a volt gauge though, as I'm pretty sure it's out of a '77 truck. Would have to dig it out to confirm though. A very rare combination, I searched for a while to find mine. Hopefully someone here will win the one on Ebay

...

Hope ths helps,

Joe

48cj2a · 04-02-2011, 06:46 PM

I'm looking for one with a 4K tach for a diesel...

b454rat · 04-02-2011, 09:15 PM

Quote:

Originally Posted by 48cj2a

I'm looking for one with a 4K tach for a diesel...

I got one sitting here for my hopefully cummins crew cab. Its out of an 80s too...had pics but they were on old computer.

BLE 'BURBAN · 04-03-2011, 04:39 AM

I put one into my 90 suburban with an air pressure gauge in place of the vacuum gauge.

parrisc19844x4_468 · 04-03-2011, 11:36 AM

Quote:

Originally Posted by 48cj2a

I'm looking for one with a 4K tach for a diesel...

The one that is posted here is for a diesel. hint the vaccum gauage. IF your truck is later then 77 you will have to swtich the amp for a volt, which can be done. Move the 3 o'clock pin to the 12 o' clock position.

I bought 3 of them two off of ebay and one off craigslist before I found one that works.

b454rat · 04-03-2011, 09:04 PM

how do you get vacuum out of a diesel??

MadManAndrew · 04-03-2011, 10:29 PM

So there's not a single place that make reproduction clusters with a tach/fuel guage?

homemade87 · 04-04-2011, 09:46 AM

I just got one from a company from called gm sports in california. the face is exstruded plastic. He can do the 5000 tach or the 7000 tach. I chose the 7000 face for my ls 5.3 conversion. I put it in a 91 suburban cluster. It was simple to install. I had to cut out the seat belt and brake indicator light out of it to make it fit. After that I just plugged it into the exsisting fuel gauge terminal and hooked up one wire to the tach feed. Was real simple to hook up. I wish I had taken some pictures before I installed. Here are some after install.

franky69c10 · 04-04-2011, 11:02 AM

^^^^
Looks real nice

Posted via Mobile Device

**N2TRUX** · 04-04-2011, 11:07 AM

Quote:

Originally Posted by homemade87

I just got one from a company from called gm sports in california..

Do they have a website? Is this them? www.gmsportssalvage.com

big10charlie · 04-04-2011, 11:30 AM

I like the factory 80psi oil pressure gauge! Heading to the junk yard now to check out all the big chevy trucks they have there!

Jonboy · 04-04-2011, 11:39 AM

Quote:

Originally Posted by big10charlie

I like the factory 80psi oil pressure gauge! Heading to the junk yard now to check out all the big chevy trucks they have there!

Pretty sure the diesel trucks had them too. (1/2-1 ton). That might be easier to find.

homemade87 · 04-04-2011, 12:22 PM

Quote:

Originally Posted by N2TRUX

Do they have a website? Is this them? www.gmsportssalvage.com

Yea, Thats where I got it. Took a while to get. I think they had to get the guy to make it. Its a new product for them . I felt I was better off with this than trying to get a used one that may or may not work. I Talked to the guy who makes them and he said if anything ever goes wrong with it he will repair it for free. Super nice guy.

MadManAndrew · 04-04-2011, 12:50 PM

Quote:

Originally Posted by homemade87

Yea, Thats where I got it. Took a while to get. I think they had to get the guy to make it. Its a new product for them . I felt I was better off with this than trying to get a used one that may or may not work. I Talked to the guy who makes them and he said if anything ever goes wrong with it he will repair it for free. Super nice guy.

If you don't mind me asking, how much did you pay for it?
Posted via Mobile Device

homemade87 · 04-04-2011, 03:32 PM

Quote:

Originally Posted by MadManAndrew

If you don't mind me asking, how much did you pay for it?
Posted via Mobile Device

It was $195.00 + shipping. By using this I could use my exsisting cluster . Whats nice about it is you could convert any cluster to a tach . You dont have to have a tach cluster to make it work. You would loose the two indicator lights at the bottom where the fuel gauge is.

jitteryguy · 04-04-2011, 04:06 PM

dang, that is sweet look'n.

franky69c10 · 04-04-2011, 05:34 PM

Quote:

Originally Posted by homemade87

Yea, Thats where I got it. Took a while to get. I think they had to get the guy to make it. Its a new product for them . I felt I was better off with this than trying to get a used one that may or may not work. I Talked to the guy who makes them and he said if anything ever goes wrong with it he will repair it for free. Super nice guy.

What car did it come out of, trying 2 find the tach/gas gauge on the site
Posted via Mobile Device

homemade87 · 04-04-2011, 06:03 PM

Quote:

Originally Posted by franky69c10

What car did it come out of, trying 2 find the tach/gas gauge on the site
Posted via Mobile Device

They have them listed for a chevy truck. Try this .http://gmsportssalvage.com/?q=node/1316. I just happen to stumble on them. These are a aftermarket they are offering. If you are on the home page look at the bottom left of the page. It will say tach and gauges.

franky69c10 · 04-04-2011, 07:14 PM

Thanks alot man how hard was to hook it up do they give u a wire diagram and directions
Posted via Mobile Device

homemade87 · 04-04-2011, 08:14 PM

Quote:

Originally Posted by franky69c10

Thanks alot man how hard was to hook it up do they give u a wire diagram and directions
Posted via Mobile Device

I did not have any directions with mine but was not needed. Using a non tach cluster you will have to cut out the housing part of the indicator light so the fuel gauge will fit into the housing. Then the unit will plug right into the same place where the fuel gauge was. It came with a wire for the tach signal that run to the hei distributor and just plugs in. In my case I used the pcm from my ls motor.

04-02-2011, 01:17 PM	#1
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	factory tach w/fuel gauge ? factory tach with fuel gauge biult in ? plus a vacum gauge ? what would this have come out of ? a buddy of mine wants to get it . http://cgi.ebay.com/ebaymotors/73-75...Q5fAccessories __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

04-02-2011, 01:41 PM	#2
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,935	Re: factory tach w/fuel gauge ? I dont but there is an excellant write up on here about the very same cluster __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe

04-02-2011, 01:55 PM	#3
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: factory tach w/fuel gauge ? medium duty trucks like the C60 C70 __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

04-02-2011, 02:51 PM	#4
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: factory tach w/fuel gauge ? And an amp gauge. I smell a fire in someones future if they are not pretty versed in these old trucks. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

04-02-2011, 04:11 PM	#5
Gyawo Registered User Join Date: Dec 2010 Location: Alberta Posts: 165	Re: factory tach w/fuel gauge ? I am liking that tach w/fuel gauge. Might have to start looking for one of those.

04-02-2011, 05:26 PM	#6
K30_dump Registered User Join Date: Oct 2007 Location: Pennsylvania Posts: 164	Re: factory tach w/fuel gauge ? Hello, Definitely a sweet looking cluster. I bought one a while back for my K30 project (still in progress ). I believe mine has a volt gauge though, as I'm pretty sure it's out of a '77 truck. Would have to dig it out to confirm though. A very rare combination, I searched for a while to find mine. Hopefully someone here will win the one on Ebay ... Hope ths helps, Joe Last edited by K30_dump; 04-02-2011 at 05:27 PM.

04-02-2011, 06:46 PM	#7
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: factory tach w/fuel gauge ? I'm looking for one with a 4K tach for a diesel... __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

04-03-2011, 04:39 AM	#9
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: factory tach w/fuel gauge ? I put one into my 90 suburban with an air pressure gauge in place of the vacuum gauge. __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

04-03-2011, 09:04 PM	#11
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: factory tach w/fuel gauge ? how do you get vacuum out of a diesel?? __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

04-03-2011, 10:29 PM	#12
MadManAndrew Registered User Join Date: Mar 2011 Location: Dallas, Texas Posts: 920	Re: factory tach w/fuel gauge ? So there's not a single place that make reproduction clusters with a tach/fuel guage? __________________ 1955 Chevy 3600 http://67-72chevytrucks.com/vboard/s...61#post8589061

04-04-2011, 09:46 AM	#13
homemade87 Registered User Join Date: Apr 2010 Location: Guntersville Alabama Posts: 1,073	Re: factory tach w/fuel gauge ? I just got one from a company from called gm sports in california. the face is exstruded plastic. He can do the 5000 tach or the 7000 tach. I chose the 7000 face for my ls 5.3 conversion. I put it in a 91 suburban cluster. It was simple to install. I had to cut out the seat belt and brake indicator light out of it to make it fit. After that I just plugged it into the exsisting fuel gauge terminal and hooked up one wire to the tach feed. Was real simple to hook up. I wish I had taken some pictures before I installed. Here are some after install. Attached Images Last edited by homemade87; 04-04-2011 at 04:55 PM.

04-04-2011, 11:02 AM	#14
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: factory tach w/fuel gauge ? ^^^^ Looks real nice Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

04-04-2011, 11:30 AM	#16
big10charlie Registered User Join Date: Mar 2011 Location: owatonna, minnesota Posts: 58	Re: factory tach w/fuel gauge ? I like the factory 80psi oil pressure gauge! Heading to the junk yard now to check out all the big chevy trucks they have there!

04-04-2011, 04:06 PM	#21
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: factory tach w/fuel gauge ? dang, that is sweet look'n. __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

04-04-2011, 07:14 PM	#24
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: factory tach w/fuel gauge ? Thanks alot man how hard was to hook it up do they give u a wire diagram and directions Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.