Another header thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BR3W CITY · 04-04-2011, 04:57 PM

So its time for me to do header fitment on my 66. I'm using the stock perches moved to the front holes, transdapt mount adapter plates. My truck manifolds are close, but they hit the perches. What is the 60-66 crew using for manifolds?
I saw some "build your own" manifold kits on speedway motors and considered that. The fab isn't a problem, but I'd like to just bolt something on, and save myself the time if possible.

BR3W CITY · 04-07-2011, 04:09 PM

No one in the 60-66 community has headers?

structures · 04-07-2011, 04:19 PM

I used the doug thorley 67-72 swap headers, THY-324Y-C. I have the ECE mounts. You have to change the plug wires and oil dip stick to make them fit.

**Clyde65** · 04-07-2011, 05:07 PM

I used Sanderson shorties, CSLS1 and I have the POL perches in the rear holes..

BR3W CITY · 04-07-2011, 11:54 PM

pics of fitment? I need something similar to the stock manifolds in size/shape, but with a slightly lower profile, and without that wierd hump on the stock mani. I was thinking tbss manifolds if i can find them, but havent found any local to try.

structures · 04-08-2011, 08:15 AM

Here's a few pics of where I'm at. TR65 did trailblazer SS manifolds.

http://67-72chevytrucks.com/vboard/s...d.php?t=413880

Sometimes I think this would have been a better route, b/c I don't like the alternate plug wires I had to use or that I have to swap the oil dipstick.

**Clyde65** · 04-08-2011, 11:17 AM

Ill get you a pic in a bit, my truck is in the parking lot, gotta wait for someone else to come in b4 I can go out. Im in IT Jail I guess.

BR3W CITY · 04-08-2011, 11:33 AM

thats clyde.
Structures, thanks for the pics, those look like nice gear. I'm a bit concerned about the collectors clearing the "ears" on my 4l80e.

04-04-2011, 04:57 PM	#1
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Another header thread So its time for me to do header fitment on my 66. I'm using the stock perches moved to the front holes, transdapt mount adapter plates. My truck manifolds are close, but they hit the perches. What is the 60-66 crew using for manifolds? I saw some "build your own" manifold kits on speedway motors and considered that. The fab isn't a problem, but I'd like to just bolt something on, and save myself the time if possible. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

04-07-2011, 04:09 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Another header thread No one in the 60-66 community has headers? __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

04-07-2011, 04:19 PM	#3
structures Registered User Join Date: Nov 2009 Location: OK Posts: 274	Re: Another header thread I used the doug thorley 67-72 swap headers, THY-324Y-C. I have the ECE mounts. You have to change the plug wires and oil dip stick to make them fit. __________________ Robert 1965 Chevy C10 http://67-72chevytrucks.com/vboard/s...d.php?t=374373 1997 Chevy K2500 6.5 diesel

04-07-2011, 05:07 PM	#4
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Another header thread I used Sanderson shorties, CSLS1 and I have the POL perches in the rear holes.. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 04-07-2011 at 05:08 PM.

04-07-2011, 11:54 PM	#5
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Another header thread pics of fitment? I need something similar to the stock manifolds in size/shape, but with a slightly lower profile, and without that wierd hump on the stock mani. I was thinking tbss manifolds if i can find them, but havent found any local to try. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

04-08-2011, 08:15 AM	#6
structures Registered User Join Date: Nov 2009 Location: OK Posts: 274	Re: Another header thread Here's a few pics of where I'm at. TR65 did trailblazer SS manifolds. http://67-72chevytrucks.com/vboard/s...d.php?t=413880 Sometimes I think this would have been a better route, b/c I don't like the alternate plug wires I had to use or that I have to swap the oil dipstick. __________________ Robert 1965 Chevy C10 http://67-72chevytrucks.com/vboard/s...d.php?t=374373 1997 Chevy K2500 6.5 diesel

04-08-2011, 11:17 AM	#7
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Another header thread Ill get you a pic in a bit, my truck is in the parking lot, gotta wait for someone else to come in b4 I can go out. Im in IT Jail I guess. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

04-08-2011, 11:33 AM	#8
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Another header thread thats clyde. Structures, thanks for the pics, those look like nice gear. I'm a bit concerned about the collectors clearing the "ears" on my 4l80e. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.