Tailgate bezel help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**gregfull** · 04-11-2011, 10:56 PM

Need a little help designing a new tailgate bezel for our Suburbans. Can anyone measure how thick the bezel for the push button tailgate, liftgate button is? I want to try and reproduce one from aluminum that will be engraved with the word "suburban" or "chevrolet? Thanks in advance for the help.

tuckerracing · 04-12-2011, 04:16 PM

I have one that I can send you that you can use if that will help. Just cut me a good deal on one of the ones you make.

71gmcburb · 04-12-2011, 05:11 PM

plate --- 2 1/2" dia 1/2" thick
button - 3/4" dia 1 1/2" from the tailgate

71gmcburb · 04-12-2011, 05:12 PM

have pics just need to upload to cardomain then will post

Mulk · 04-12-2011, 05:14 PM

It's diameter is 2 1/2, and at it's thickest point it's roughly 5/8. Hope this helps. I'd definately be interested in what you a describing.

**gregfull** · 04-13-2011, 08:10 AM

Quote:

Originally Posted by tuckerracing

I have one that I can send you that you can use if that will help. Just cut me a good deal on one of the ones you make.

PM sent.

Thanks for all the help guys, I'll post a picture as soon as I have one complete. What do you think would be more appropriate, "Suburban" or "Chevrolet" engraved on the face?

**Hart_Rod** · 04-13-2011, 08:30 AM

Quote:

Originally Posted by gregfull

PM sent.

Thanks for all the help guys, I'll post a picture as soon as I have one complete. What do you think would be more appropriate, "Suburban" or "Chevrolet" engraved on the face?

My vote is for "CHEVROLET".

Mulk · 04-13-2011, 01:14 PM

It's a toss-up for me... But leaning towards suburban.

I keep toying with the idea of grafting-in the stamped "CHEVROLET" from a truck tailgate on my lower hatch, so if it was on the bezel too, it would be over-kill for me.
Posted via Mobile Device

**Hart_Rod** · 04-13-2011, 01:18 PM

Quote:

Originally Posted by Mulk

It's a toss-up for me... But leaning towards suburban.

I keep toying with the idea of grafting-in the stamped "CHEVROLET" from a truck tailgate on my lower hatch, so if it was on the bezel too, it would be over-kill for me.
Posted via Mobile Device

Just do this.....

**gregfull** · 04-15-2011, 05:08 PM

Quote:

Originally Posted by tuckerracing

I have one that I can send you that you can use if that will help. Just cut me a good deal on one of the ones you make.

Travis. PM sent.

Quote:

Originally Posted by Hart_Rod

Just do this.....

Very nice....who did that for you?

**Already Gone** · 04-15-2011, 05:29 PM

How about "ChevyBurb", it has the same amouint of letters as the word Chevrolet.

**gregfull** · 01-10-2014, 02:41 PM

Well it slow again at the shop, heck it's only been a few years since I started this post. Lol. Is there any interest in these? Here's a sample.

**LockDoc** · 01-10-2014, 08:04 PM

Quote:

Originally Posted by gregfull

Well it slow again at the shop, heck it's only been a few years since I started this post. Lol. Is there any interest in these? Here's a sample.

Looks Nice. Almost too nice for my driver... I guess it depends on the price though. You going to put one on the parts board?

LockDoc

61superman · 01-12-2014, 12:46 AM

interested for sure!! whats the going rate?

rocknss · 01-12-2014, 05:41 PM

I'm interested!

THE DRIVER · 02-25-2014, 01:15 AM

I'm interested too, Could you do custom lettering within reason? Looks awesome!

**Hart_Rod** · 02-25-2014, 11:32 AM

Quote:

Originally Posted by gregfull

Well it slow again at the shop, heck it's only been a few years since I started this post. Lol. Is there any interest in these? Here's a sample.

We're all interested!

4shongo · 02-25-2014, 02:09 PM

Quote:

Originally Posted by gregfull

Well it slow again at the shop, heck it's only been a few years since I started this post. Lol. Is there any interest in these? Here's a sample.

I will buy one!!! How much???

rocknss · 02-27-2014, 11:38 PM

X2

**gemiii** · 03-01-2014, 08:06 PM

Me also!

4shongo · 03-06-2014, 01:40 PM

Anybody have an email for Greg? Or his shop name/number? I see he doesn't visit this site that often and I would love to buy one of those bezels off him. He does some awesome work. I would think this would be a very popular little custom item for our Burbs....

4shongo · 07-28-2014, 02:24 PM

Any body know how to get in touch with OP? I would love to buy one of these bezels!!!

Tinkermc · 07-29-2014, 05:41 PM

looks real good

zellway · 05-01-2015, 11:41 AM

Sorry to drag up a old post but I didn't find any more info on this.

Mr. D · 05-05-2015, 01:50 AM

I'm interested, assuming the price is reasonable.

Food for thought, not all Suburbans are Chevys. You may consider coming up with a GMC version of the bezel as well.

Either way nice job!

04-11-2011, 10:56 PM	#1
gregfull Registered User Join Date: Jan 2004 Location: Richmond, Texas Posts: 598	Tailgate bezel help Need a little help designing a new tailgate bezel for our Suburbans. Can anyone measure how thick the bezel for the push button tailgate, liftgate button is? I want to try and reproduce one from aluminum that will be engraved with the word "suburban" or "chevrolet? Thanks in advance for the help. __________________ My Suburban Project 72 Suburban 68 SWB 57 Belair 55 Cameo 06 Chevy 1/2 ton crew 09 Suburban

04-12-2011, 04:16 PM	#2
tuckerracing Registered User Join Date: Feb 2011 Location: Bullard, Texas Posts: 140	Re: Tailgate bezel help I have one that I can send you that you can use if that will help. Just cut me a good deal on one of the ones you make. __________________ 77 Blazer 2wd 72 Blazer 2wd 72 C10 Suburban 2wd 71 C10 Suburban 2wd

04-12-2011, 05:11 PM	#3
71gmcburb Registered User Join Date: Oct 2010 Location: everett washington Posts: 382	Re: Tailgate bezel help plate --- 2 1/2" dia 1/2" thick button - 3/4" dia 1 1/2" from the tailgate __________________ a wise man once said "There are only two real rules to life... 1 - Don't sweat the small stuff 2 - Everything is small stuff

04-12-2011, 05:12 PM	#4
71gmcburb Registered User Join Date: Oct 2010 Location: everett washington Posts: 382	Re: Tailgate bezel help have pics just need to upload to cardomain then will post __________________ a wise man once said "There are only two real rules to life... 1 - Don't sweat the small stuff 2 - Everything is small stuff

04-12-2011, 05:14 PM	#5
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: Tailgate bezel help It's diameter is 2 1/2, and at it's thickest point it's roughly 5/8. Hope this helps. I'd definately be interested in what you a describing. __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

04-13-2011, 01:14 PM	#8
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: Tailgate bezel help It's a toss-up for me... But leaning towards suburban. I keep toying with the idea of grafting-in the stamped "CHEVROLET" from a truck tailgate on my lower hatch, so if it was on the bezel too, it would be over-kill for me. Posted via Mobile Device __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

04-15-2011, 05:29 PM	#11
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,080	Re: Tailgate bezel help How about "ChevyBurb", it has the same amouint of letters as the word Chevrolet. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

01-10-2014, 02:41 PM	#12
gregfull Registered User Join Date: Jan 2004 Location: Richmond, Texas Posts: 598	Re: Tailgate bezel help Well it slow again at the shop, heck it's only been a few years since I started this post. Lol. Is there any interest in these? Here's a sample. Attached Images __________________ My Suburban Project 72 Suburban 68 SWB 57 Belair 55 Cameo 06 Chevy 1/2 ton crew 09 Suburban

01-12-2014, 12:46 AM	#14
61superman Registered User Join Date: Dec 2006 Location: sl,ut Posts: 145	Re: Tailgate bezel help interested for sure!! whats the going rate? __________________ current project: 1964 chevy II Wagon 1956 3100 1972 c10 burb bagged 1962 GMC burb 1963 c10 burb 1966 c10 burb 1995 chevy lowerado 5/7 static drop daily driver 1963 c10 step side 1965 super sport impala 1967 c30

01-12-2014, 05:41 PM	#15
rocknss Registered User Join Date: Oct 2004 Location: Milwaukee, WI Posts: 403	Re: Tailgate bezel help I'm interested!

02-25-2014, 01:15 AM	#16
THE DRIVER Registered User Join Date: Jun 2012 Location: Bay Area, NorCal Posts: 38	Re: Tailgate bezel help I'm interested too, Could you do custom lettering within reason? Looks awesome!

02-27-2014, 11:38 PM	#19
rocknss Registered User Join Date: Oct 2004 Location: Milwaukee, WI Posts: 403	Re: Tailgate bezel help X2 __________________ Steven 69 Chevy C10 Suburban 350 700R4 w/Disc brakes on all four corners 2017 50th Anniversary Camaro SS 2004 Chevy Impala LS 2016 Chevy Malibu LT

03-01-2014, 08:06 PM	#20
gemiii Registered User Join Date: Jan 2006 Location: Florida Posts: 121	Re: Tailgate bezel help Me also! __________________ 69 Camaro Convt 427 AT PW PT(since 83) 72 3/4 ton Suburban (Project Mid Life Crisis Low Rider Burb) 1930 Model A Tudor next project (ratrod)

03-06-2014, 01:40 PM	#21
4shongo Registered User Join Date: Sep 2012 Location: Arlington, TN Posts: 315	Re: Tailgate bezel help Anybody have an email for Greg? Or his shop name/number? I see he doesn't visit this site that often and I would love to buy one of those bezels off him. He does some awesome work. I would think this would be a very popular little custom item for our Burbs....

07-28-2014, 02:24 PM	#22
4shongo Registered User Join Date: Sep 2012 Location: Arlington, TN Posts: 315	Re: Tailgate bezel help Any body know how to get in touch with OP? I would love to buy one of these bezels!!!



Register or Log In To remove these advertisements.

07-29-2014, 05:41 PM	#23
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Tailgate bezel help looks real good

05-01-2015, 11:41 AM	#24
zellway Registered User Join Date: Dec 2009 Location: Arizona City, AZ Posts: 747	Re: Tailgate bezel help Sorry to drag up a old post but I didn't find any more info on this. __________________ ----------------------------------------------------------- Erik My 69 suburban http://67-72chevytrucks.com/vboard/s...d.php?t=530626 1970 C10 step Project Jiminy http://67-72chevytrucks.com/vboard/s...d.php?t=682647 RUST!? Thats just mother natures way of telling all of us.....MINE!!!!

05-05-2015, 01:50 AM	#25
Mr. D Registered User Join Date: Mar 2015 Location: San Jose, CA Posts: 130	Re: Tailgate bezel help I'm interested, assuming the price is reasonable. Food for thought, not all Suburbans are Chevys. You may consider coming up with a GMC version of the bezel as well. Either way nice job!

Register or Log In To remove these advertisements.