TN 4x4 spring hangers front/rear NEEDED - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968vetL-71 · 04-15-2011, 08:45 PM

Hey all. I'm looking for some spring hangers for a 4wd conversion. Need front assy and rear hangers also. The front-rear hangers need to be the long drop like a blazer, not 2wd. Let me know what you have. Do you have a parts frame or ? May be interested in complete frame if location is close. Thanks in advance!!

Livrat · 04-15-2011, 09:48 PM

I have everything you need, Front spring core supports/hangers, front spring rear mounts with shackles, long rear spring front hangers, and rear hangers, All off of a 72 Blazer. $150.00 shipped

1968vetL-71 · 04-16-2011, 10:10 AM

Thanks Livrat, i will definately keep this as an option. I'd like to find something alittle closer and save a little money too boot. I had to pass on a complete 72 blazer frame on the way back from Nebraska for 100 cause I couldn't get it on my trailer. ( too full of parts ) If I don't find anything closer I will give you a shout. Thanks again.

Were the parts taken off carefully? any torch marks or rust ?

Matthew

Livrat · 04-16-2011, 11:24 AM

Matthew,
No worries, I understand wanting to find some closer and saving some $$,
All were taken off as carefully as possible by "washing" the rivit heads off with a torch. most do have surface rust but nothing severe,
I have many sets so I am sure I could come up with a nice set.

1968vetL-71 · 04-26-2011, 05:39 PM

I've got all the 4x4 spring hangers and brackets ( front and rear ) coming this way! Thanks Livrat!!!!!!!

1968vetL-71 · 04-30-2011, 09:28 PM

Everything came in and looks fantastic!! Thanks again Livrat!! Now its time to measure, measure, measure!

Livrat · 05-01-2011, 12:04 AM

Your welcome, Glad to hear they arrived safely

cube · 10-24-2012, 03:20 AM

do you have any more hanger brackets? or short bed 4x4 frame?

Livrat · 10-24-2012, 10:24 AM

Sorry to say.. I do not have any more of those brackets or a short bed frame

04-15-2011, 08:45 PM	#1
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	4x4 spring hangers front/rear NEEDED Hey all. I'm looking for some spring hangers for a 4wd conversion. Need front assy and rear hangers also. The front-rear hangers need to be the long drop like a blazer, not 2wd. Let me know what you have. Do you have a parts frame or ? May be interested in complete frame if location is close. Thanks in advance!! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

04-15-2011, 09:48 PM	#2
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 4x4 spring hangers front/rear NEEDED I have everything you need, Front spring core supports/hangers, front spring rear mounts with shackles, long rear spring front hangers, and rear hangers, All off of a 72 Blazer. $150.00 shipped

04-16-2011, 10:10 AM	#3
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 4x4 spring hangers front/rear NEEDED Thanks Livrat, i will definately keep this as an option. I'd like to find something alittle closer and save a little money too boot. I had to pass on a complete 72 blazer frame on the way back from Nebraska for 100 cause I couldn't get it on my trailer. ( too full of parts ) If I don't find anything closer I will give you a shout. Thanks again. Were the parts taken off carefully? any torch marks or rust ? Matthew __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

04-16-2011, 11:24 AM	#4
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 4x4 spring hangers front/rear NEEDED Matthew, No worries, I understand wanting to find some closer and saving some $$, All were taken off as carefully as possible by "washing" the rivit heads off with a torch. most do have surface rust but nothing severe, I have many sets so I am sure I could come up with a nice set.

04-26-2011, 05:39 PM	#5
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 4x4 spring hangers front/rear NEEDED I've got all the 4x4 spring hangers and brackets ( front and rear ) coming this way! Thanks Livrat!!!!!!! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

04-30-2011, 09:28 PM	#6
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 4x4 spring hangers front/rear NEEDED Everything came in and looks fantastic!! Thanks again Livrat!! Now its time to measure, measure, measure! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

05-01-2011, 12:04 AM	#7
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 4x4 spring hangers front/rear NEEDED Your welcome, Glad to hear they arrived safely

10-24-2012, 03:20 AM	#8
cube Registered User Join Date: Oct 2012 Location: sumrall,ms Posts: 19	Re: 4x4 spring hangers front/rear NEEDED do you have any more hanger brackets? or short bed 4x4 frame?

10-24-2012, 10:24 AM	#9
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 4x4 spring hangers front/rear NEEDED Sorry to say.. I do not have any more of those brackets or a short bed frame



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.