74 blazer parting with lift - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gn4u2c* · 03-26-2003, 12:32 PM

I have a 74 blazer I am going to part just to much rust to fix it has a lift on it 4 or 6 inch because it has 36 ' swampers on it but they are sold. good top bolt in roll bar glass grill rears lots of good items just e-me what you need.

**crossy** · 03-26-2003, 06:23 PM

welcome new guy. where in So. Pa are you. how much for the roll bar/ thanx , DAVE

*gn4u2c* · 03-27-2003, 01:25 PM

just south of hanover pa it is at my dads house parkton md 21120 zip. that is closer to you most likely anyway.

alf4444 · 03-27-2003, 04:23 PM

is it leafs or blocks in the rear?

cherry delight · 03-27-2003, 06:19 PM

I know the tires are gone what about the wheels?

Gregsmx · 03-27-2003, 08:44 PM

gn, can you tell me what color the interior is? I'm looking for front bucket seats and center console and possibly seatbelts all in Blue.

Secondly, was it a 'Cheyenne' model? If so, what is the condition of the rear side panels on either side of the rear seat?

Would it be possible to post some pics?
Thanks, Greg.

MAC67 · 03-29-2003, 05:17 PM

id would like to have the lift,, what would youre bottom dollar be on it,,,,it would need to be shipped to illinois

**old Rusty C10** · 03-29-2003, 09:48 PM

i may be interested in the doors strictly for parts i dont care how rotted they are or even dented i need the window tracks and related accessories
How much and could i pick up from you as i live in NJ

*gn4u2c* · 03-29-2003, 10:29 PM

you can have the doors for $20.00 each complete

I will sell the lift for 100.00 if you take it off 150 If I have to take it off it has springs not blocks

**old Rusty C10** · 03-29-2003, 11:04 PM

ok where exactly are ya and how do i get there im in NJ and close to all major roads

chevy_fatman · 03-30-2003, 08:42 PM

Quote:

Originally posted by gn4u2c
just south of hanover pa it is at my dads house parkton md 21120 zip. that is closer to you most likely anyway.

Welcome to this site man, I'm in Hanover as well.

Is nice to see somebody local in here, enjoy your stay and don't be shy

Gregsmx · 03-31-2003, 12:04 AM

any word on the condition of the seats and console?

*gn4u2c* · 03-31-2003, 05:37 PM

old Rusty C10
95 south to 695 west to 83 north exit 31 middletown rd left off ramp park and ride on the right 1/10 of a mile I can meet you there or another 2 miles and you will be there . e-me for a phone #

*gn4u2c* · 03-31-2003, 05:39 PM

seats would need recovered as they have some rips but padding is decent and rear seat is in great shape. 50.00 for all seats and center console

Gregsmx · 03-31-2003, 11:34 PM

gn4u, that's great on the seats and console, I'll take them all. I'll send you a private message with mailing address and information, so shipping can be figured.
Thanks again, Greg.

Gregsmx · 04-08-2003, 07:37 PM

gn4u ??? are you still here?

monypit · 04-09-2003, 11:09 PM

Did you end up selling thew doors? All I need is the track that the window rides in at the rear of the door. email me at ryansdad2001@msn.com if you could

03-26-2003, 12:32 PM	#1
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	74 blazer parting with lift I have a 74 blazer I am going to part just to much rust to fix it has a lift on it 4 or 6 inch because it has 36 ' swampers on it but they are sold. good top bolt in roll bar glass grill rears lots of good items just e-me what you need.

03-26-2003, 06:23 PM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	welcome new guy. where in So. Pa are you. how much for the roll bar/ thanx , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

03-27-2003, 04:23 PM	#4
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	lift springs is it leafs or blocks in the rear? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

03-27-2003, 08:44 PM	#6
Gregsmx Registered User Join Date: Jan 2003 Location: San Antonio Tx Posts: 338	gn, can you tell me what color the interior is? I'm looking for front bucket seats and center console and possibly seatbelts all in Blue. Secondly, was it a 'Cheyenne' model? If so, what is the condition of the rear side panels on either side of the rear seat? Would it be possible to post some pics? Thanks, Greg. __________________ '75 Blazer RAT 4X4 "BLAZIN" - Custom frame off Here's the website I'm uploading pics to: Greg's frame off project

03-29-2003, 09:48 PM	#8
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,297	i may be interested in the doors strictly for parts i dont care how rotted they are or even dented i need the window tracks and related accessories How much and could i pick up from you as i live in NJ __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-27-2003, 01:25 PM	#3
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	just south of hanover pa it is at my dads house parkton md 21120 zip. that is closer to you most likely anyway.

03-27-2003, 06:19 PM	#5
cherry delight Registered User Join Date: Nov 2002 Location: montana Posts: 28	I know the tires are gone what about the wheels?

03-29-2003, 05:17 PM	#7
MAC67 " SHOW ME" Join Date: Jan 2003 Location: shelbyville illinois Posts: 2,624	id would like to have the lift,, what would youre bottom dollar be on it,,,,it would need to be shipped to illinois

03-29-2003, 10:29 PM	#9
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	you can have the doors for $20.00 each complete I will sell the lift for 100.00 if you take it off 150 If I have to take it off it has springs not blocks

03-29-2003, 11:04 PM	#10
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,297	ok where exactly are ya and how do i get there im in NJ and close to all major roads __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-31-2003, 12:04 AM	#12
Gregsmx Registered User Join Date: Jan 2003 Location: San Antonio Tx Posts: 338	any word on the condition of the seats and console? __________________ '75 Blazer RAT 4X4 "BLAZIN" - Custom frame off Here's the website I'm uploading pics to: Greg's frame off project

03-31-2003, 05:37 PM	#13
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	old Rusty C10 95 south to 695 west to 83 north exit 31 middletown rd left off ramp park and ride on the right 1/10 of a mile I can meet you there or another 2 miles and you will be there . e-me for a phone #

03-31-2003, 05:39 PM	#14
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	seats would need recovered as they have some rips but padding is decent and rear seat is in great shape. 50.00 for all seats and center console

03-31-2003, 11:34 PM	#15
Gregsmx Registered User Join Date: Jan 2003 Location: San Antonio Tx Posts: 338	gn4u, that's great on the seats and console, I'll take them all. I'll send you a private message with mailing address and information, so shipping can be figured. Thanks again, Greg. __________________ '75 Blazer RAT 4X4 "BLAZIN" - Custom frame off Here's the website I'm uploading pics to: Greg's frame off project

04-08-2003, 07:37 PM	#16
Gregsmx Registered User Join Date: Jan 2003 Location: San Antonio Tx Posts: 338	gn4u ??? are you still here? __________________ '75 Blazer RAT 4X4 "BLAZIN" - Custom frame off Here's the website I'm uploading pics to: Greg's frame off project



Register or Log In To remove these advertisements.

04-09-2003, 11:09 PM	#17
monypit Registered User Join Date: Jan 2002 Location: Peoria, AZ Posts: 115	Did you end up selling thew doors? All I need is the track that the window rides in at the rear of the door. email me at ryansdad2001@msn.com if you could __________________ 1973/1997 Blazer/Tahoe (it just doesn't know that it is a '73)

Register or Log In To remove these advertisements.