AUX battery tray - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Seraph · 05-03-2011, 12:58 PM

I have been looking on here and google and i haven't found any repop AUX battery trays.....do they even exists???

**StingRay** · 05-03-2011, 01:22 PM

Yes there is a guy in Alberta that has them. Scott's Super Trucks. I have an exact 3D cad model of the parts from an original I have and have considered having some made myself. The bottom tray is the same as the the pass side one it's the brackets that are different.

Seraph · 05-03-2011, 02:15 PM

Quote:

Originally Posted by StingRay

Attachment 741117
Yes there is a guy in Alberta that has them. Scott's Super Trucks. I have an exact 3D cad model of the parts and have considered having some made myself. The bottom tray is the same as the the pass side one it's the brackets that are different.

Thanks!!!! I hope he still has one! ha

Steve Hafner · 05-03-2011, 05:51 PM

I bought mine from someone on this website a couple of months ago for around $100. It didn't have any pits and looked like a NOS one after it was bead-blasted and painted - they come up every now and then.

short-t · 12-05-2011, 07:20 PM

Called Scotts today and he is not making them anymore, he said the demand wasn't high enough. But he did say he would make more if he had more interest in them..

PLEASE EVERYBODY CALL HIM AND ASK ABOUT THEM, then maybe he will get more made.

Scott's Super Trucks
Penhold, Alberta, Canada
T0M 1R0

Phone: (403) 886-5572 or 1-800-GMC-CHEV

Longhorn Man · 12-05-2011, 07:39 PM

Sweet! That means the two or three i have here are worth more again!
Posted via Mobile Device

short-t · 12-05-2011, 08:17 PM

Quote:

Originally Posted by Longhorn Man

Sweet! That means the two or three i have here are worth more again!
Posted via Mobile Device

Would you like to part with one?
Posted via Mobile Device

**StingRay** · 12-06-2011, 01:23 PM

So what level of perfection do you think people want on this? If I were to get some made to near perfection I'd need to laser or water jet cut to get all the holes nice and I'd need to use two different gauges of material. What are your opinions on something where the holes needed a little clean up on the drill press and both the side plates and the small angles that support the tray were in the same gauge of material? On the OE one the angles are a gauge thinner than the side plates. I can see where these could be pricey to make. If most are looking for something functional that looks 96% then it might be easier and cheaper to do. Frankly most of the holes in the one side plate look like they aren't used in a lot of applications anyway. Can I assume that a lot of the time people are looking for this tray to use in an lsx swap?

rob32472 · 12-06-2011, 02:12 PM

http://www.brotherstrucks.com/prodin...number=BBA72AX.

short-t · 12-06-2011, 06:20 PM

Quote:

Originally Posted by rob32472

http://www.brotherstrucks.com/prodin...number=BBA72AX.

Thanks for the link!

*Achevytruck* · 02-13-2012, 05:40 PM

is there more info and pictures on this , not trying to highjack this post

rob32472 · 02-13-2012, 05:51 PM

the brothers link above should be good..... it shows a pic of the tray

*Achevytruck* · 02-13-2012, 11:51 PM

Oh ok Rob32472

OldCreek · 02-14-2012, 02:36 PM

Wow, I think the ones I bought from Scott were about $75 a couple of years ago...the brother's one for $130!

Daaaanz67 · 02-16-2012, 06:22 PM

I'm doing an ls swap on my 69c10 and need one. Bit the bullet and ordered one from brothers going on three weeks back ordered of course this really sucks
Posted via Mobile Device

Street Smart · 02-16-2012, 08:01 PM

Quote:

Originally Posted by Daaaanz67

I'm doing an ls swap on my 69c10 and need one. Bit the bullet and ordered one from brothers going on three weeks back ordered of course this really sucks
Posted via Mobile Device

I did a LS swap too, I need a new tray anyway... Having it on the other side would give me room for an air filter box. Also kinda balance out the engine compartment.

short-t · 02-16-2012, 10:50 PM

Quote:

Originally Posted by OldCreek

Wow, I think the ones I bought from Scott were about $75 a couple of years ago...the brother's one for $130!

Ya but Scotts wont be getting any more.. they say there is no demand for them..

05-03-2011, 12:58 PM	#1
Seraph Registered User Join Date: Oct 2009 Location: Streetman Texas Posts: 134	AUX battery tray I have been looking on here and google and i haven't found any repop AUX battery trays.....do they even exists??? __________________ 1972 chevy c 10 longbed 2000 Ford Powerstroke (daily driver) Last edited by Seraph; 05-03-2011 at 12:58 PM.

05-03-2011, 01:22 PM	#2
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Re: AUX battery tray Yes there is a guy in Alberta that has them. Scott's Super Trucks. I have an exact 3D cad model of the parts from an original I have and have considered having some made myself. The bottom tray is the same as the the pass side one it's the brackets that are different. __________________ Saskatoon, Saskatchewan Canada Last edited by StingRay; 05-03-2011 at 05:26 PM.

05-03-2011, 05:51 PM	#4
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: AUX battery tray I bought mine from someone on this website a couple of months ago for around $100. It didn't have any pits and looked like a NOS one after it was bead-blasted and painted - they come up every now and then. Attached Images __________________ . . . . Life is short . . . we only have, right now. . . . . My 70 C-10's BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=475526

12-05-2011, 07:20 PM	#5
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 325	Re: AUX battery tray Called Scotts today and he is not making them anymore, he said the demand wasn't high enough. But he did say he would make more if he had more interest in them.. PLEASE EVERYBODY CALL HIM AND ASK ABOUT THEM, then maybe he will get more made. Scott's Super Trucks Penhold, Alberta, Canada T0M 1R0 Phone: (403) 886-5572 or 1-800-GMC-CHEV __________________ 1968 C10 LS2/4L70e swb fleet side. ECE front disk conversion and 3.5/5 drop. SOLD. 1968 C20 Custom Camper 396 50th survivor! SOLD to northerngmc

12-05-2011, 07:39 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: AUX battery tray Sweet! That means the two or three i have here are worth more again! Posted via Mobile Device

12-06-2011, 01:23 PM	#8
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Re: AUX battery tray So what level of perfection do you think people want on this? If I were to get some made to near perfection I'd need to laser or water jet cut to get all the holes nice and I'd need to use two different gauges of material. What are your opinions on something where the holes needed a little clean up on the drill press and both the side plates and the small angles that support the tray were in the same gauge of material? On the OE one the angles are a gauge thinner than the side plates. I can see where these could be pricey to make. If most are looking for something functional that looks 96% then it might be easier and cheaper to do. Frankly most of the holes in the one side plate look like they aren't used in a lot of applications anyway. Can I assume that a lot of the time people are looking for this tray to use in an lsx swap? __________________ Saskatoon, Saskatchewan Canada Last edited by StingRay; 12-06-2011 at 01:30 PM.

12-06-2011, 02:12 PM	#9
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: AUX battery tray http://www.brotherstrucks.com/prodin...number=BBA72AX.

02-13-2012, 05:40 PM	#11
Achevytruck Account Suspended Join Date: Feb 2012 Location: Alva FL Posts: 197	Re: AUX battery tray is there more info and pictures on this , not trying to highjack this post

02-13-2012, 05:51 PM	#12
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: AUX battery tray the brothers link above should be good..... it shows a pic of the tray

02-13-2012, 11:51 PM	#13
Achevytruck Account Suspended Join Date: Feb 2012 Location: Alva FL Posts: 197	Re: AUX battery tray Oh ok Rob32472

02-14-2012, 02:36 PM	#14
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: AUX battery tray Wow, I think the ones I bought from Scott were about $75 a couple of years ago...the brother's one for $130! __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

02-16-2012, 06:22 PM	#15
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: AUX battery tray I'm doing an ls swap on my 69c10 and need one. Bit the bullet and ordered one from brothers going on three weeks back ordered of course this really sucks Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.