Cheyenne Super Guy's...Help me out! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sanford66 · 05-14-2011, 10:56 PM

As you can see from the pic my glove box door woodgrain decal is peeling. I would like to replace it with the Cheyenne Super decal with the trim. Does anyone have any info or pics on this? I have never seen one up close so i don't know if the trim is part of the decal or not. The Brother's catalog i have lists a 67-72 woodgrain decal with trim for $49.99, part # GBW9603 but i can't find it on their website. Is this what i need or what?? Joseph

sameyrasmea72 · 05-15-2011, 01:43 AM

I am not sure what you mean by “Cheyenne super” decal, but I assume you mean the emblem. They make them aftermarket and I think they are nice pieces. As for the wood grain, it originally came on a thin piece of aluminum that was formed and glued to the glove box door. As far as I know the aluminum part is not reproduced. Some people just stick a wood grain sticker to the door like yours, but I would buy a used aluminum piece off an original Cheyenne super and put some sort of wood grain on that.

**special-K** · 05-15-2011, 09:01 AM

The Cheyenne Super glovebox applique has the woodgrain photo etched onto it. But,you can freshen one up with a new sticker.You may or may not have the same issue with peeling. Careful application on a dry clean surface is the key. Just keep on rubbing,even when you think you have it stuck on good. The Truck Shop,the original one owned by Jerry Brown in Crossville,TN,makes nice decals in the correct pattern. You can buy one attached to an original Cheyenne Super applique. Their website is www.thetruckshop.com

Sicklajoie · 05-15-2011, 09:12 AM

Bummer you just missed out on this!

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT

**leddzepp** · 05-15-2011, 10:51 AM

Quote:

Originally Posted by special-K

The Cheyenne Super glovebox applique has the woodgrain photo etched onto it. But,you can freshen one up with a new sticker.You may or may not have the same issue with peeling. Careful application on a dry clean surface is the key. Just keep on rubbing,even when you think you have it stuck on good. The Truck Shop,the original one owned by Jerry Brown in Crossville,TN,makes nice decals in the correct pattern. You can buy one attached to an original Cheyenne Super applique. Their website is www.thetruckshop.com

I checked out the website and do not see any prices. Am I missing something?

**Classic Heartbeat** · 05-15-2011, 11:13 AM

I have a large roll of woodgrain applique that is NOS GM. I haven't figured out what I am going to do with it yet, but I did aquire it..lol WES

**special-K** · 05-15-2011, 06:30 PM

Quote:

Originally Posted by leddzepp

I checked out the website and do not see any prices. Am I missing something?

Your best bet is calling. They're not real website oriented. They may just have a limited supply since they use the applique.

Wes,how long is it? I want to make my truck a woody...Got 35-40 feet?

chipflyer · 05-15-2011, 06:41 PM

Here is another option I have been thinking about. Contact these guys tarjac and see if they can put the correct woodgrain pattern on one of the original aluminum applique's. Looks to me like they should be able to duplicate how they were originally done. Anyone else thought about this?

Jeff

sanford66 · 05-17-2011, 01:18 PM

Thanks for the replys. I was really wondering if the Brothers part included the trim or not. I know the trim came on the supers only, but i like the way it looks and thought it would be a good way to keep the decal from peeling up again. Thought i could buy a new $12.00 dollar decal and use the trim to redo my glove box door. How is the trim fastend to the door, does anyone have a pic of one disassembled?? Thanks again. Joseph

**70shortfleet** · 05-17-2011, 04:28 PM

It's glued on

sameyrasmea72 · 05-17-2011, 07:15 PM

Quote:

Originally Posted by sanford66

. How is the trim fastend to the door, does anyone have a pic of one disassembled?? Thanks again. Joseph

I can't find a pic of the aluminum part, but here is one of a door that shows the glue.

**special-K** · 05-18-2011, 08:49 AM

I'll see if I can dig one out.

sanford66 · 05-18-2011, 12:29 PM

Thanks guys. Hmmm..it looks like it is going to be hard to find some good used trim! I would probly never be able to get the trim off another door to put it on mine without bending it. I would still like to see a pic of the trim off of the door though. Sounds like this is going to be a PITA!! Joseph

VA72C10 · 05-18-2011, 01:03 PM

just an fyi from what I've read/heard....

jerry brown buys his woodgrain overlays from CSM. They are the only one with any more of that particular 3m grain. although it is lighter than your door panel woodgrain in the picture. I had a set restored to match the gauge bezel, glovebox door, and the door pieces so they all match now.

**71blksuper4x4** · 05-18-2011, 02:01 PM

No one at all sells the correct pattern of woodgrain in vinyl. I have a roll of NOS 3m Di-Noc that is the correct grain dated 1975 or 76'. The color is darker, but sometime when I have enough coin, I am going to get it scanned and printed in the correct color, and will probably sell rolls of it for original resto guys. The assembly line glovebox doors and door panel pieces were transfered onto the aluminum and to my knowledge not vinyl overlayed. Every single original piece looks the same and just by cleaning it, it can remove the pattern. I prefer the vinyl approach because you can clean it. They make products to keep the vinyl from peeling. As far as gluing the trim back on to a glovebox door, Liquid Nails works best and looks similar to what the factory glue looked like. Trevor

**special-K** · 05-18-2011, 05:35 PM

Here is the Jerry Brown vinyl on an instrument cluster and a picture of the door insert (not vinyl):

tommy butler · 05-18-2011, 05:42 PM

hey special k i got 72 cheyenne front end damage frame horn drivers bent back to frame motor and transmision is at angle can you give me any info can this be fixed

VA72C10 · 05-18-2011, 06:45 PM

Here's the ones I got from Cheyenne Super Man (All matching-but all lighter than the factory style woodgrain but I was more concerned with it all matching)

again-might want to price out CSM and Jerry brown since Jerry buys his made from Gary (CSM) I'm guessing Jerry's cost a lil bit more

sanford66 · 05-20-2011, 02:54 PM

Thanks for all the help guy's! I will keep my eyes open for some used trim and go from there. Thanks again, Joseph

**Dieselwrencher** · 05-20-2011, 03:51 PM

Can you guys share some contact info for them? Thanks Ryan.

**special-K** · 05-20-2011, 04:50 PM

Quote:

Originally Posted by tommy butler

hey special k i got 72 cheyenne front end damage frame horn drivers bent back to frame motor and transmision is at angle can you give me any info can this be fixed

Have a body shop that does frame straightening take a look at it. I really can't say without seeing it. Doesn't sound too good,though.

05-14-2011, 10:56 PM	#1
sanford66 Registered User Join Date: Jun 2007 Location: Everest Ks Posts: 749	Cheyenne Super Guy's...Help me out! As you can see from the pic my glove box door woodgrain decal is peeling. I would like to replace it with the Cheyenne Super decal with the trim. Does anyone have any info or pics on this? I have never seen one up close so i don't know if the trim is part of the decal or not. The Brother's catalog i have lists a 67-72 woodgrain decal with trim for $49.99, part # GBW9603 but i can't find it on their website. Is this what i need or what?? Joseph Attached Images __________________ 1970 Chevelle Nomad station wagon 1966 C-10 lwb,250-six,granny 4speed 1966 C-10 lwb,factory A/C,Custom Cab 1954 Delray 2-door sedan [rat rod project]

05-15-2011, 01:43 AM	#2
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: Cheyenne Super Guy's...Help me out! I am not sure what you mean by “Cheyenne super” decal, but I assume you mean the emblem. They make them aftermarket and I think they are nice pieces. As for the wood grain, it originally came on a thin piece of aluminum that was formed and glued to the glove box door. As far as I know the aluminum part is not reproduced. Some people just stick a wood grain sticker to the door like yours, but I would buy a used aluminum piece off an original Cheyenne super and put some sort of wood grain on that. Attached Images __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

05-15-2011, 09:01 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Cheyenne Super Guy's...Help me out! The Cheyenne Super glovebox applique has the woodgrain photo etched onto it. But,you can freshen one up with a new sticker.You may or may not have the same issue with peeling. Careful application on a dry clean surface is the key. Just keep on rubbing,even when you think you have it stuck on good. The Truck Shop,the original one owned by Jerry Brown in Crossville,TN,makes nice decals in the correct pattern. You can buy one attached to an original Cheyenne Super applique. Their website is www.thetruckshop.com __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-15-2011 at 09:04 AM.

05-15-2011, 09:12 AM	#4
Sicklajoie The Niner Join Date: Nov 2010 Location: Broad Brook, CT Posts: 2,493	Re: Cheyenne Super Guy's...Help me out! Bummer you just missed out on this! http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT __________________ "A good racer is one whose head is in communication with his balls." - Richie Evans 1970 C/20 - 402/TH400/3.54s - 74K miles 2003 GMC Sierra 2500 - Wheatland Yellow Niner Progression Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697183 Classic Trucks article: https://www.motortrend.com/features/...et-c20-driven/ Last edited by Sicklajoie; 05-15-2011 at 09:13 AM.

05-15-2011, 11:13 AM	#6
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: Cheyenne Super Guy's...Help me out! I have a large roll of woodgrain applique that is NOS GM. I haven't figured out what I am going to do with it yet, but I did aquire it..lol WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-15-2011, 06:41 PM	#8
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Cheyenne Super Guy's...Help me out! Here is another option I have been thinking about. Contact these guys tarjac and see if they can put the correct woodgrain pattern on one of the original aluminum applique's. Looks to me like they should be able to duplicate how they were originally done. Anyone else thought about this? Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

05-17-2011, 01:18 PM	#9
sanford66 Registered User Join Date: Jun 2007 Location: Everest Ks Posts: 749	Re: Cheyenne Super Guy's...Help me out! Thanks for the replys. I was really wondering if the Brothers part included the trim or not. I know the trim came on the supers only, but i like the way it looks and thought it would be a good way to keep the decal from peeling up again. Thought i could buy a new $12.00 dollar decal and use the trim to redo my glove box door. How is the trim fastend to the door, does anyone have a pic of one disassembled?? Thanks again. Joseph __________________ 1970 Chevelle Nomad station wagon 1966 C-10 lwb,250-six,granny 4speed 1966 C-10 lwb,factory A/C,Custom Cab 1954 Delray 2-door sedan [rat rod project]

05-17-2011, 04:28 PM	#10
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: Cheyenne Super Guy's...Help me out! It's glued on

05-18-2011, 08:49 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Cheyenne Super Guy's...Help me out! I'll see if I can dig one out. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-18-2011 at 08:57 AM.

05-18-2011, 12:29 PM	#13
sanford66 Registered User Join Date: Jun 2007 Location: Everest Ks Posts: 749	Re: Cheyenne Super Guy's...Help me out! Thanks guys. Hmmm..it looks like it is going to be hard to find some good used trim! I would probly never be able to get the trim off another door to put it on mine without bending it. I would still like to see a pic of the trim off of the door though. Sounds like this is going to be a PITA!! Joseph __________________ 1970 Chevelle Nomad station wagon 1966 C-10 lwb,250-six,granny 4speed 1966 C-10 lwb,factory A/C,Custom Cab 1954 Delray 2-door sedan [rat rod project]

05-18-2011, 01:03 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Cheyenne Super Guy's...Help me out! just an fyi from what I've read/heard.... jerry brown buys his woodgrain overlays from CSM. They are the only one with any more of that particular 3m grain. although it is lighter than your door panel woodgrain in the picture. I had a set restored to match the gauge bezel, glovebox door, and the door pieces so they all match now. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-18-2011, 02:01 PM	#15
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: Cheyenne Super Guy's...Help me out! No one at all sells the correct pattern of woodgrain in vinyl. I have a roll of NOS 3m Di-Noc that is the correct grain dated 1975 or 76'. The color is darker, but sometime when I have enough coin, I am going to get it scanned and printed in the correct color, and will probably sell rolls of it for original resto guys. The assembly line glovebox doors and door panel pieces were transfered onto the aluminum and to my knowledge not vinyl overlayed. Every single original piece looks the same and just by cleaning it, it can remove the pattern. I prefer the vinyl approach because you can clean it. They make products to keep the vinyl from peeling. As far as gluing the trim back on to a glovebox door, Liquid Nails works best and looks similar to what the factory glue looked like. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-18-2011, 05:35 PM	#16
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Cheyenne Super Guy's...Help me out! Here is the Jerry Brown vinyl on an instrument cluster and a picture of the door insert (not vinyl): Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-18-2011, 05:42 PM	#17
tommy butler Registered User Join Date: May 2011 Location: deland fla Posts: 1	Re: Cheyenne Super Guy's...Help me out! hey special k i got 72 cheyenne front end damage frame horn drivers bent back to frame motor and transmision is at angle can you give me any info can this be fixed

05-18-2011, 06:45 PM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Cheyenne Super Guy's...Help me out! Here's the ones I got from Cheyenne Super Man (All matching-but all lighter than the factory style woodgrain but I was more concerned with it all matching) again-might want to price out CSM and Jerry brown since Jerry buys his made from Gary (CSM) I'm guessing Jerry's cost a lil bit more __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

05-20-2011, 02:54 PM	#19
sanford66 Registered User Join Date: Jun 2007 Location: Everest Ks Posts: 749	Re: Cheyenne Super Guy's...Help me out! Thanks for all the help guy's! I will keep my eyes open for some used trim and go from there. Thanks again, Joseph __________________ 1970 Chevelle Nomad station wagon 1966 C-10 lwb,250-six,granny 4speed 1966 C-10 lwb,factory A/C,Custom Cab 1954 Delray 2-door sedan [rat rod project]

05-20-2011, 03:51 PM	#20
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Cheyenne Super Guy's...Help me out! Can you guys share some contact info for them? Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

Register or Log In To remove these advertisements.