PA 6 lug 15X10 and 15X8 CHROME spoke wheels

[Matty Wagz]

Here i have a set of driver quality chrome spoke wheels. I bought them for my truck, but have decided to stick with my steelies for now. Someone painted the spokes black which i think looks good, but it needs redone. There are a couple small spots of rust bubbles and a few scratches but all in all in good shape and perfect for a driver. All 4 center caps also with wheels. Would rather not ship, but am willing to meet if will make it easier for you. Wheels are in Lancaster County, PA zip 17543. Drop me a line if interested. Asking $150 OBO, also interested in trades... what you got???

thanks, Wagz

[Hottrucks]

does your truck have a c notch?? I'm bagged and wounder if they will rub/hit on my truck??

[Matty Wagz]

no C notch but i have bags on the back. my fender lip is trimmed short from before so i had clearance, BARELY. let me know, price is OBO, just want them off my garage floor.

Thanks, Wagz

[Hottrucks]

can you flip the back rim around and check spacing for me ...I'm not worried about the back space just the front ....if you could lay the rim face down and measure from the floor to the bolt flange it will give me something to work with ...dad is going south maybe we can do something..

how does the 8" one compare to a stock 8" rally on the off set....I think my stock rallies are going to be ok after I put the disc convertion on??

thanx
Jeff

[Matty Wagz]

I will get you more specific measurements tonight. I work in Harrisburg, right off route 81, not sure how far South your Dad is coming, but should be able to work something out.

Wagz

[Hottrucks]

thanx
he's heading to southern VA also there anotehr board member in VA that willbe coming home soon...if I think they will fit we'll figure it out

Jeff

[Matty Wagz]

here we go, with the rear wheels 15x10 face down on the floor the measurement to the bolt flange is 7 3/4". The front 15x8 face down on the floor are 7" to the bolt flange. Looks like regular 15x8 rally wheels are about 6 1/4".

let me know if you want them. really want them off my garage floor.

thanks,
Wagz

[Hottrucks]

I think I would be screwed on the fronts...when I add the disc breaks I'm going to add 3/4" to my width to start I think the extra 3/4" on each side is going to put the tires into the outer fender...dam!! theres no way I have 1 1/2" to give up...

thanx Wagz for taking the time..... I think these will be fine on a dropped truck but not bagged/tucked 67/72 bummer to I think they might have brought out a bit more of the Caddy in my truck!!

Jeff

[Matty Wagz]

no problem man, thanks for the interest. next step is to make hose hangers out of them.

have a good one, Wagz

[Hottrucks]

I hating you about now!!! I'm going to ask dad when he's coming home...I knows there not going to fit my truck but dam...not a hose reel someone must want these

[low79fx]

PM sent

[Matty Wagz]

Will sell for $100, that is what i paid. Wasn't saying hose reel to pi$$ anyone off. Just need off my garage floor. Wanting to start pounding on my truck and just picked up 84 regal that is dying to get some work done to it SOON.

let me know, would really rather NOT ship these things unless buyer arranges everything including packing them up........

Wagz

[ScottH]

Wagz, would these fit a stock 65 without any mods?

thanks
Scott

[Matty Wagz]

ScottH, shouldn't be a problem. you can see in the above pics how they BARELY squeezed inside the lip of my rear fender well with the bags aired out. They are a GM bolt pattern 6 x 5.5.

let me know, Wagz

[mikey531]

Originally Posted by Hottrucks

I hating you about now!!! I'm going to ask dad when he's coming home...I knows there not going to fit my truck but dam...not a hose reel someone must want these

I can grab them if you want them

[Hottrucks]

Originally Posted by mikey531

I can grab them if you want them

you where going to be my next call.....probably easier for you to call me since all I do is ride around anyway..

[ScottH]

I'll take them if they get to me. I have a friend in Lititz and he could stop by to pick them up for me. LMK.

Thanks
Scott

[Matty Wagz]

PM sent ScottH, let me know.

thanks, Wagz

[Matty Wagz]

Wheels are gone pending payment from ScottH, not getting turned into hose reels so rest easy................

thanks again ScottH

Wagz

[Matty Wagz]

SOLD, being picked up tonight, Please delete.

thanks, Wagz