NC Feeler: 70 Project Part Out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STOCKISH · 05-21-2011, 12:54 AM

Well guys, my priorities have changed a little and I need to part out my 70. I will not sell until I have buyers for everything. (at least most of it) I have a 1970 high hump cab with provisions for cab lights. It is nearly perfect. Only has one pencil sized hole to repair on passenger rocker under weatherstrip. Two pin holes in drivers floor that can just be welded up. Rockers, cab corners, floors and cab supports, roof, cowl, etc are perfect. Doors are complete and perfect. No dents, dings, rust etc... You will not be disappointed or find a nicer cab for this price on this coast.

Asking $2500 FIRM **REDUCED $2200 CASH** Need gone ASAP!

Totally rebuilt and powdercoated SWB chassis. New EVERYTHING in the suspension, steering and brakes. I was told by previous owner that the rear axle needs rebuilt but I havent looked into it. Lowered in front with 2" CPP springs and 2 1/2 McGaughys spindles. Doestech dropped shocks also. ALL steering and suspension and brake parts BRAND NEW. Lowered in rear with 6" CPP coil springs and Doestech dropped shocks. Comes with 15x10 Chrome hammer wheels for rollers.

Asking $1000 FIRM

Original SWB bedsides. No rust through anywhere I can find. Tops and sides straight as well. Trim holes filled with body filler but not welded shut so you can run trim if you like still. There was a roll pan tacked on when i bought it so there is some signs of that on the rear. They just need to be ground down with a flap wheel and they'll be good to go.

Asking $500 FIRM

I will try to get better pictures tomorrow but these are all I have for now.

STOCKISH · 05-21-2011, 12:55 AM

More

STOCKISH · 05-21-2011, 12:59 AM

Still more

DesertCat · 05-21-2011, 01:30 AM

I'd buy that frame right now if you were half the distance. I'll look into shipping and get back to you...

*67/72junkie* · 05-21-2011, 01:47 AM

I will take the frame and bed if you find someone who wants the cab.Send me a pm with your # I might buy all of it.

STOCKISH · 05-21-2011, 09:21 AM

PM Sent.

47thriftmaster · 05-21-2011, 09:50 AM

If it gets to me I'd take the bed, your just up the road from me.

STOCKISH · 05-21-2011, 01:45 PM

Just to be clear, it is just the bed sides, not an entire bed.

**72ironmike** · 05-21-2011, 03:05 PM

Interested in sides only if they make it to here. Thanks.

*67/72junkie* · 05-21-2011, 04:39 PM

Tried several tomes to call you.Check your messages and give me a call back when you get time.

STOCKISH · 05-21-2011, 04:49 PM

Sorry buddy. I was outside cutting grass and didnt hear the phone. Frame and bedsides are sold pending payment to 67/72junkie.

STOCKISH · 05-21-2011, 05:02 PM

i need a Cummins engine/trans for my crew cab build as well. Will trade the cab and doors for a good running Cummins engine/trans. Possibly just the engind depending on how nice it is. LMK, thanks.

STOCKISH · 05-22-2011, 09:47 AM

TTT for the morning crowd! Can help load if you have someone come by to pick up for shipping too.

oldblue1968chevy · 05-22-2011, 12:41 PM

Wow, thats some clean stuff for around here. A steal as well!!

STOCKISH · 05-22-2011, 01:28 PM

Thanks man, I had a guy interested so I sold the chassis and bedsides. Now he isnt sure... Really need this gone. Please pass the word fellas.

Liddy71 · 05-22-2011, 01:47 PM

can i get some pics of the bedsides pending pics

STOCKISH · 05-22-2011, 02:03 PM

Sorry man, I stated already the frame and bedsides are sold pending payment. If it falls through I will post pics for everyone. Thanks alot.

71 super · 05-22-2011, 08:19 PM

If the sides fall through I will take them and come get them next Saturday. Let me know if someone does not come through. Harold

STOCKISH · 05-22-2011, 09:04 PM

Will let everyone know if the bedsides fall through. Couls use some help unloading this cab and doors too. Will seperate cab and doors if I have buyers for both and price totals $2500.

**72ironmike** · 05-22-2011, 09:49 PM

Is there a pecking order on the bedsides ?

STOCKISH · 05-22-2011, 09:59 PM

67/72junkie said he is coming next weekend with cash. He has already try to pay me with pay pal and told him not to worry about it until he got here look at them. I am pretty positive they're sold but if he does not show up the order will be the order that is in the post.
Posted via Mobile Device

STOCKISH · 05-23-2011, 11:44 AM

Someone needs a great cab...

**72ironmike** · 05-23-2011, 12:01 PM

I've seen that cab & great is no exaggeration ! If I had storage it would be mine.

STOCKISH · 05-23-2011, 12:19 PM

Thanks Mike.

no moa · 05-23-2011, 12:26 PM

Thats going to make someone a great cab project. Wish it was me.

05-21-2011, 12:54 AM	#1
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Feeler: 70 Project Part Out Well guys, my priorities have changed a little and I need to part out my 70. I will not sell until I have buyers for everything. (at least most of it) I have a 1970 high hump cab with provisions for cab lights. It is nearly perfect. Only has one pencil sized hole to repair on passenger rocker under weatherstrip. Two pin holes in drivers floor that can just be welded up. Rockers, cab corners, floors and cab supports, roof, cowl, etc are perfect. Doors are complete and perfect. No dents, dings, rust etc... You will not be disappointed or find a nicer cab for this price on this coast. Asking $2500 FIRM REDUCED $2200 CASH Need gone ASAP! Totally rebuilt and powdercoated SWB chassis. New EVERYTHING in the suspension, steering and brakes. I was told by previous owner that the rear axle needs rebuilt but I havent looked into it. Lowered in front with 2" CPP springs and 2 1/2 McGaughys spindles. Doestech dropped shocks also. ALL steering and suspension and brake parts BRAND NEW. Lowered in rear with 6" CPP coil springs and Doestech dropped shocks. Comes with 15x10 Chrome hammer wheels for rollers. Asking $1000 FIRM Original SWB bedsides. No rust through anywhere I can find. Tops and sides straight as well. Trim holes filled with body filler but not welded shut so you can run trim if you like still. There was a roll pan tacked on when i bought it so there is some signs of that on the rear. They just need to be ground down with a flap wheel and they'll be good to go. Asking $500 FIRM I will try to get better pictures tomorrow but these are all I have for now. Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. Last edited by STOCKISH; 05-24-2011 at 08:25 AM.

05-21-2011, 12:55 AM	#2
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out More Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-21-2011, 12:59 AM	#3
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out Still more Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-21-2011, 01:30 AM	#4
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Feeler: 70 Project Part Out I'd buy that frame right now if you were half the distance. I'll look into shipping and get back to you... __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

05-21-2011, 01:47 AM	#5
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Feeler: 70 Project Part Out I will take the frame and bed if you find someone who wants the cab.Send me a pm with your # I might buy all of it.

05-21-2011, 09:21 AM	#6
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out PM Sent. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-21-2011, 09:50 AM	#7
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Feeler: 70 Project Part Out If it gets to me I'd take the bed, your just up the road from me.

05-21-2011, 01:45 PM	#8
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out Just to be clear, it is just the bed sides, not an entire bed. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-21-2011, 03:05 PM	#9
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,048	Re: Feeler: 70 Project Part Out Interested in sides only if they make it to here. Thanks.

05-21-2011, 04:39 PM	#10
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Feeler: 70 Project Part Out Tried several tomes to call you.Check your messages and give me a call back when you get time.

05-21-2011, 04:49 PM	#11
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out Sorry buddy. I was outside cutting grass and didnt hear the phone. Frame and bedsides are sold pending payment to 67/72junkie. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-21-2011, 05:02 PM	#12
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out i need a Cummins engine/trans for my crew cab build as well. Will trade the cab and doors for a good running Cummins engine/trans. Possibly just the engind depending on how nice it is. LMK, thanks. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-22-2011, 09:47 AM	#13
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out TTT for the morning crowd! Can help load if you have someone come by to pick up for shipping too. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-22-2011, 12:41 PM	#14
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Feeler: 70 Project Part Out Wow, thats some clean stuff for around here. A steal as well!! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

05-22-2011, 01:28 PM	#15
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out Thanks man, I had a guy interested so I sold the chassis and bedsides. Now he isnt sure... Really need this gone. Please pass the word fellas. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.



Register or Log In To remove these advertisements.

05-22-2011, 01:47 PM	#16
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Feeler: 70 Project Part Out can i get some pics of the bedsides pending pics

05-22-2011, 02:03 PM	#17
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out Sorry man, I stated already the frame and bedsides are sold pending payment. If it falls through I will post pics for everyone. Thanks alot. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-22-2011, 08:19 PM	#18
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: Feeler: 70 Project Part Out If the sides fall through I will take them and come get them next Saturday. Let me know if someone does not come through. Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

05-22-2011, 09:04 PM	#19
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out Will let everyone know if the bedsides fall through. Couls use some help unloading this cab and doors too. Will seperate cab and doors if I have buyers for both and price totals $2500. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-22-2011, 09:49 PM	#20
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,048	Re: Feeler: 70 Project Part Out Is there a pecking order on the bedsides ?

05-22-2011, 09:59 PM	#21
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out 67/72junkie said he is coming next weekend with cash. He has already try to pay me with pay pal and told him not to worry about it until he got here look at them. I am pretty positive they're sold but if he does not show up the order will be the order that is in the post. Posted via Mobile Device __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-23-2011, 11:44 AM	#22
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out Someone needs a great cab... __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-23-2011, 12:01 PM	#23
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,048	Re: Feeler: 70 Project Part Out I've seen that cab & great is no exaggeration ! If I had storage it would be mine.

05-23-2011, 12:19 PM	#24
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Feeler: 70 Project Part Out Thanks Mike. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-23-2011, 12:26 PM	#25
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: Feeler: 70 Project Part Out Thats going to make someone a great cab project. Wish it was me. __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

Register or Log In To remove these advertisements.