![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Drag Racer
Join Date: Nov 2006
Location: Mason City, Iowa
Posts: 1,276
|
need advice on which way to go...
ok so my plans are to lower my truck 4.5/6 and do 15x10 wheels out back with 315/60R15 tires, give it somewhat of a mini tubbed racey look, my question for you guys if when i lower it im definitely going to ditch the trailer hitch, and probably cut the exhaust back either ahead of rear axle and dump it OR cut it at the downward bend at the axle and dump it there. The reason i say probably cut exhaust is im not 100% which way to go depending on what i end up doing out back for a bumper, which leads me to my initial question regarding this post.
Do I:
Heres some pics of how it sits/looks out back now, and im thinking when i lower it.....its gonna have to change to look right. ![]() ![]() ![]()
__________________
Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79 |
![]() |
![]() |
![]() |
#2 |
Diggin The SquareLife
Join Date: Dec 2010
Location: garland,tx
Posts: 1,933
|
Re: need advice on which way to go...
get a sport bumper!!!
![]() |
![]() |
![]() |
![]() |
#3 |
Drag Racer
Join Date: Nov 2006
Location: Mason City, Iowa
Posts: 1,276
|
Re: need advice on which way to go...
ok so then do i keep exhaust how it is or still chop it back and dump it?
__________________
Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2010
Location: Fort Worth, TX
Posts: 727
|
Re: need advice on which way to go...
I like roll pans usually but on yours id second the sport bumper, and dump your exhaust before the rear axle.
|
![]() |
![]() |
![]() |
#5 |
Drag Racer
Join Date: Nov 2006
Location: Mason City, Iowa
Posts: 1,276
|
Re: need advice on which way to go...
thats kinda what im thinkin too but im still pretty undecided......ill let this boil over night and maybe tomorrow ill get a lot more hits with maybe new suggestions/ideas beyond what i have listed
__________________
Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79 |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Jul 2010
Location: memphis
Posts: 2,537
|
Re: need advice on which way to go...
Get a bumper...chop tha pipes flush with tha bumper & I think that hitch may hang to low with a 6in drop.
Posted via Mobile Device
__________________
1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse |
![]() |
![]() |
![]() |
#7 |
Diggin The SquareLife
Join Date: Dec 2010
Location: garland,tx
Posts: 1,933
|
Re: need advice on which way to go...
if u get a sport bumper looks like your exhaust is gona be low..i would have them dumped before axle.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2005
Location: Fort Lauderdale, FL
Posts: 30
|
Re: need advice on which way to go...
Nice truck. and
"Hey baby, Nice trailer hitch you got there." lmao Roll pan or stock bumper. Last edited by mentlmidget; 05-30-2011 at 08:23 AM. |
![]() |
![]() |
![]() |
#9 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: need advice on which way to go...
Sport bumper, and cut the exhaust behind the axle. That's how mine is done, and it's lower than what you have there. On my '79 with a 4/6 drop, I was able to run mine out the side in pretty much the stock location. My advice would be to do the drop, them make the tailpipes fit where you want them.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
![]() |
![]() |
![]() |
#10 |
Drag Racer
Join Date: Nov 2006
Location: Mason City, Iowa
Posts: 1,276
|
Re: need advice on which way to go...
So it looks like everyone was pretty much thinking the same as me with dumping the exhaust and going with a sport bumper. It almost seems like the days of rollpans are diminishing. Anyone else think that? Where's a good place to buy a sport bumper at?
Posted via Mobile Device
__________________
Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79 |
![]() |
![]() |
![]() |
#11 |
Junior Member
Join Date: Dec 2006
Location: Guymon, Oklahoma
Posts: 2,040
|
Re: need advice on which way to go...
Put a nice bumper on it, and gooo. That's one sharp little truck as is. Really an eye-catcher.
I'm old fashioned, tho. Cayoterun
__________________
Cayoterun Okla. Panhandle I think I'll do it myself and pay the extra $500. |
![]() |
![]() |
![]() |
#12 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: need advice on which way to go...
The current choice of most is the sport bumper. Remove the hitch, and tuck the exhaust for a really clean look.
Are you changing tires, or tires and wheels? If your going to change wheels too, consider a going with a 17 or bigger for a more contemporary look. The current "Pro Touring" is a hot look, and 315/40/18's would look really mean on the back of your truck.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#13 |
Drag Racer
Join Date: Nov 2006
Location: Mason City, Iowa
Posts: 1,276
|
Re: need advice on which way to go...
yeah but im not sure i have thje money right now for an 18" wheel.....
__________________
Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79 |
![]() |
![]() |
![]() |
#14 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: need advice on which way to go...
If it were me, I would wait till I did. If thats what you really want, save till you can afford them. You won't regret it in the end.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#15 |
Drag Racer
Join Date: Nov 2006
Location: Mason City, Iowa
Posts: 1,276
|
Re: need advice on which way to go...
i know that...but honestly i was kinda gonna go for the weld racing wheel look....
__________________
Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79 |
![]() |
![]() |
![]() |
Bookmarks |
|
|