OH WTB I need the Carb-Throttle Bracket for a 69-70 Kickdown Switch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70cst** · 06-09-2011, 10:21 AM

Ok...
I am getting close to getting the Kick Down Switch installed but there is one minor detail

I need the Bracket that mounts to the carb which the switch mounts to... I hope I am saying this right. There were two styles for the 69-70 BB engines. I found a new repop bracket for $40 which is more than I want to spend...
If you have a bracket please post a pic so Fine69 can verify it's the carb bracket that I need. If you have one and fine69 says go...then I will be ready to roll

Thanks Again...we will evenually get the Circuit Rider back on the road

**70cst** · 06-09-2011, 07:26 PM

ttt

**70cst** · 06-14-2011, 12:11 AM

ttt

Dano69c10 · 06-14-2011, 12:17 PM

I might have the bracket you are looking for. If it is you can have it for free. It is the one the kickdown cable hooks to, right? Will try to post a pic later.

**70cst** · 06-14-2011, 12:23 PM

Quote:

Originally Posted by Dano69c10

I might have the bracket you are looking for. If it is you can have it for free. It is the one the kickdown cable hooks to, right? Will try to post a pic later.

Yes...Thats the one (I think). Fine 69 can verify this. I'll trade you a 70's NOS T Shirt decal for the bracket. Its looks like the one on my Avatar.

Dano69c10 · 06-14-2011, 05:29 PM

Sorry the one I have is the intake manifold mount (early model) for the kickdown cable off a 69 c-10 with a sbc.

**70cst** · 06-14-2011, 07:17 PM

Quote:

Originally Posted by Dano69c10

Sorry the one I have is the intake manifold mount (early model) for the kickdown cable off a 69 c-10 with a sbc.

Oh well. Its the thought that counts

I'll find one some day.

*sharpie1972* · 06-14-2011, 07:29 PM

Something like this? Sharpie

7T2 · 06-14-2011, 07:39 PM

Quote:

Originally Posted by Dano69c10

Sorry the one I have is the intake manifold mount (early model) for the kickdown cable off a 69 c-10 with a sbc.

I might be able to use that...my 69 has a small block, and the kickdown cable is just hanging down by the transmission.

**Classic Heartbeat** · 06-14-2011, 08:13 PM

T-400s do not have kick down cables. They have electric kick downs, that is why they need the switch and bracket like sharpie1972 has pictured.
Hey sharpie1972, is that removed from a small block or big block? Looks just like the one on my 68 327 with 4BBL carb. WES

*sharpie1972* · 06-14-2011, 08:39 PM

Hi Wes, as far as I know SB & BB engines shared the same switch and bracket with the exception of the oddball 67 setup and straight/V6 setups.... but I could be blowing smoke! Sharpie

**70cst** · 06-14-2011, 09:46 PM

Quote:

Originally Posted by sharpie1972

Something like this? Sharpie

sharpie1972 ...I met with Fine69 tonite and its the bracket that mounts to the throttle linkage that when you put the pedal to the metal...the bracket hits the plunger part on the kickdown switch if I am saying it correctly. From my conversation with WES the Small Block and Big Block uses the same bracket. I didn't realize the bracket would be that hard to buy. I had the switch but am missing the bracket.

**70STOVEBOLT** · 06-15-2011, 12:13 PM

The one sharpie has should be the correct one, assuming a SB and BB use the same one.

**70cst** · 06-15-2011, 12:42 PM

Quote:

Originally Posted by 70STOVEBOLT

The one sharpie has should be the correct one, assuming a SB and BB use the same one.

I agree. I just need the little bracket and I will be all set. If I can't find one FS than Fine69 will have to make something up that will work. We are getting very close to getting the Circuit Rider back on the road.

Posted via Mobile Device

**70cst** · 06-15-2011, 07:07 PM

Mini Bump

VA72C10 · 06-16-2011, 12:25 AM

ttt for you!

**70cst** · 06-16-2011, 09:16 PM

Ttt

**70STOVEBOLT** · 06-17-2011, 07:49 AM

Is the one Sharpie posted the correct one? If so, I have one just like it I can ship to you for $15.

**70cst** · 06-17-2011, 08:03 AM

Quote:

Originally Posted by 70STOVEBOLT

Is the one Sharpie posted the correct one? If so, I have one just like it I can ship to you for $15.

Do you have the small bracket or the bracket that the switch is mounted to or both? I'm interested. Thanks

**70cst** · 06-17-2011, 02:43 PM

To the very ends of the earth I will search

**70STOVEBOLT** · 06-17-2011, 05:08 PM

I think I only have the large bracket the switch is mounted to, I will check tonight and let you know tomorrow.

**70cst** · 06-17-2011, 05:35 PM

Quote:

Originally Posted by 70STOVEBOLT

I think I only have the large bracket the switch is mounted to, I will check tonight and let you know tomorrow.

Ok Thanks 70STOVEBOLT...I think I need the small bracket which is the bracket that hits the plunger on the 400 kickdown switch. I Think.

I may have found a repop source for these...Again I think.

**70STOVEBOLT** · 06-18-2011, 11:31 AM

Yeah, I only have the large bracket. Good luck with your search.

**70cst** · 06-18-2011, 11:42 AM

Quote:

Originally Posted by 70STOVEBOLT

Yeah, I only have the large bracket. Good luck with your search.

Ok Thanks for the update....my search continues for the elusive bracket.

Posted via Mobile Device

VA72C10 · 06-18-2011, 02:14 PM

ttt

06-09-2011, 10:21 AM	#1
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	WTB I need the Carb-Throttle Bracket for a 69-70 Kickdown Switch Ok... I am getting close to getting the Kick Down Switch installed but there is one minor detail I need the Bracket that mounts to the carb which the switch mounts to... I hope I am saying this right. There were two styles for the 69-70 BB engines. I found a new repop bracket for $40 which is more than I want to spend... If you have a bracket please post a pic so Fine69 can verify it's the carb bracket that I need. If you have one and fine69 says go...then I will be ready to roll Thanks Again...we will evenually get the Circuit Rider back on the road __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 06-17-2011 at 09:05 PM.

06-09-2011, 07:26 PM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: HELP WTB I need the Carb Bracket for a 69-70 Kickdown Switch ttt __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-14-2011, 12:11 AM	#3
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch ttt __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-14-2011, 12:17 PM	#4
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch I might have the bracket you are looking for. If it is you can have it for free. It is the one the kickdown cable hooks to, right? Will try to post a pic later. __________________ '69 Fleet It ain't yours, if you didn't build it! Last edited by Dano69c10; 06-14-2011 at 12:19 PM.

06-14-2011, 05:29 PM	#6
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch Sorry the one I have is the intake manifold mount (early model) for the kickdown cable off a 69 c-10 with a *sbc*. __________________ '69 Fleet It ain't yours, if you didn't build it!

06-14-2011, 07:29 PM	#8
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch Something like this? Sharpie Attached Images

06-14-2011, 08:13 PM	#10
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch T-400s do not have kick down cables. They have electric kick downs, that is why they need the switch and bracket like sharpie1972 has pictured. Hey sharpie1972, is that removed from a small block or big block? Looks just like the one on my 68 327 with 4BBL carb. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

06-14-2011, 08:39 PM	#11
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch Hi Wes, as far as I know SB & BB engines shared the same switch and bracket with the exception of the oddball 67 setup and straight/V6 setups.... but I could be blowing smoke! Sharpie

06-15-2011, 12:13 PM	#13
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,284	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch The one sharpie has should be the correct one, assuming a SB and BB use the same one. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-15-2011, 07:07 PM	#15
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch Mini Bump __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-16-2011, 12:25 AM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch ttt for you! __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-16-2011, 09:16 PM	#17
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch Ttt __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-17-2011, 07:49 AM	#18
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,284	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch Is the one Sharpie posted the correct one? If so, I have one just like it I can ship to you for $15. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-17-2011, 02:43 PM	#20
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch To the very ends of the earth I will search __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-17-2011, 05:08 PM	#21
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,284	Re: WTB I need the Carb Bracket for a 69-70 Kickdown Switch I think I only have the large bracket the switch is mounted to, I will check tonight and let you know tomorrow. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

06-18-2011, 11:31 AM	#23
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,284	Re: WTB I need the Carb-Throttle Bracket for a 69-70 Kickdown Switch Yeah, I only have the large bracket. Good luck with your search. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-18-2011, 02:14 PM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: WTB I need the Carb-Throttle Bracket for a 69-70 Kickdown Switch ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.