Looking for a fuel pick up pre screen - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jcis4me · 06-21-2011, 12:33 AM

Aloha Guys
I am looking for a screen or sock that fits on the end of the fuel pick up in the gas tank. The one that is on mine is frayed and in dire need of being tossed in the trash.
I've looked at all the usuals like summit lmc brothers etc. anybody know where I might pick on up?
Mahalo (thanks)
Aloha
Marty

Clutch442 · 06-21-2011, 11:23 PM

The only place I have ever seen the sock for sale by itself is Classic Parts. www.classicparts.com. The part number is 23-598 for the 3/8 sending unit. I haven't seen one for the 5/16 sending untit available seperately. Crazy I was researching this myself awhile back and was actually able to find where I wrote it down!

**LockDoc** · 06-22-2011, 12:43 AM

-
I got mine from my local GM dealer. It was called a filter on the invoice.

LockDoc

cdowns · 06-22-2011, 07:26 AM

i have gotten generic replacements at local autoparts stores

i've also made my own using slainless steel mesh

Livrat · 06-22-2011, 11:15 AM

They were/are availiable at GM,
listed as:
Fuel tank gauge strainer/sock
#5651705 5/16”
#5651702 3/8”

jcis4me · 06-22-2011, 12:02 PM

Aloha Guys
I tried the local ap's but as always " year make model engine size 2 wheel drive auto then no got um brah maybe we can order from da mainland!" ! I hate computers at the ap stores. I'll try classic next.
Aloha
Marty

06-21-2011, 12:33 AM	#1
jcis4me Registered User Join Date: Aug 2010 Location: Jersey shore Posts: 115	Looking for a fuel pick up pre screen Aloha Guys I am looking for a screen or sock that fits on the end of the fuel pick up in the gas tank. The one that is on mine is frayed and in dire need of being tossed in the trash. I've looked at all the usuals like summit lmc brothers etc. anybody know where I might pick on up? Mahalo (thanks) Aloha Marty

06-21-2011, 11:23 PM	#2
Clutch442 Registered User Join Date: Dec 2010 Location: Ooltewah, TN Posts: 89	Re: Looking for a fuel pick up pre screen The only place I have ever seen the sock for sale by itself is Classic Parts. www.classicparts.com. The part number is 23-598 for the 3/8 sending unit. I haven't seen one for the 5/16 sending untit available seperately. Crazy I was researching this myself awhile back and was actually able to find where I wrote it down!

06-22-2011, 12:43 AM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,635	Re: Looking for a fuel pick up pre screen - I got mine from my local GM dealer. It was called a filter on the invoice. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

06-22-2011, 07:26 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Looking for a fuel pick up pre screen i have gotten generic replacements at local autoparts stores i've also made my own using slainless steel mesh __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-22-2011, 12:02 PM	#6
jcis4me Registered User Join Date: Aug 2010 Location: Jersey shore Posts: 115	Re: Looking for a fuel pick up pre screen Aloha Guys I tried the local ap's but as always " year make model engine size 2 wheel drive auto then no got um brah maybe we can order from da mainland!" ! I hate computers at the ap stores. I'll try classic next. Aloha Marty

06-22-2011, 11:15 AM	#5
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Looking for a fuel pick up pre screen They were/are availiable at GM, listed as: Fuel tank gauge strainer/sock #5651705 5/16” #5651702 3/8”



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.