Finally, My 22s are HERE!!! Kind of... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muthstryker · 06-26-2011, 03:15 AM

So, I finally got to see the light at the end of the longest tunnel ever. (Had to wait 8 mos for the wheels to be made because I was the first to order them in 22s and they needed a special forging.)

These are the front wheels, I will be getting the rears next week they had a problem in the clear coat on the rear wheels so they were re spraying it. The rears will have a bigger lip.

Pictures do not do these wheels justice, they really need to be seen in person to appreciate the amount of detail in them. I tried to capture it the best as possible with my camera phone..

And a couple of teaser pics of the wheels on the back of the truck.. (YES, The truck is a shelf right now, ignore the stuff in the bed, I bought a 67 Cutlass and its taking up the garage right now and using up my trucks space..)

tantrumpipeline · 06-26-2011, 03:45 AM

I think they are going to look sweet, when do we see the final pics with rubber?

TheApocalyptican · 06-26-2011, 03:50 AM

Not too sure if I like the 22's part as I'm not typically a fan of anything over 20's but I'll reserve judgement til I see them on the truck with rubber. The design of the rims however are really good looking. Who makes 'em?

bigwheel15 · 06-26-2011, 04:05 AM

Too beautiful...I couldn't even drive on those lol.

juiceman650 · 06-26-2011, 04:37 AM

They look like Bonspeeds, am I correct?
Posted via Mobile Device

88Jimmy4x4 · 06-26-2011, 09:08 AM

wow those are nice...whats the brand and wheel name

well worth the wait

3r!c84 · 06-26-2011, 09:13 AM

Well worth the wait. Truck already looks great! This just topped it off... Again! Just need to adress that motor now

and get a built thread !
Posted via Mobile Device

pig rig · 06-26-2011, 09:25 AM

looks sweet I hope to see it and you at a couple of shows this summer

Pop's C-10 · 06-26-2011, 09:31 AM

they look good

muthstryker · 06-26-2011, 11:21 AM

They are made by Rushforth wheels, they are Concept I's. The fronts are 22x8.5 and the rears are 22x10. I wont be getting rubber on the wheels for awhile because I had the wheels made to fit Wilwood 14" disc brakes, and the front wont go on over my hubs. Kind of messing with the cutlass for a little bit. I was just excited they finally came!

As soon as I buy those brakes I will get put everything on right away, still need to get a tranny and have the rear end re built for the motor.

Cherub · 06-26-2011, 11:27 AM

oh yea they look killer, now wrap some rubber around them and get that thing on the road!

muthstryker · 06-26-2011, 11:32 AM

Quote:

Originally Posted by bigwheel15

Too beautiful...I couldn't even drive on those lol.

I want to use them as end tables in my living room

pig rig · 06-26-2011, 12:19 PM

Quote:

Originally Posted by muthstryker

I want to use them as end tables in my living room

you can goto target and get round glass that will fit them for CHEEP! its for a round table they sale
you should just put the glass on them in the living room to see how the little woman likes them

muthstryker · 06-26-2011, 12:29 PM

I actually have round glass tables that the glass is big enough, however, that "little woman" is my mother. I told her my idea and she wasn't having it...

broey · 06-26-2011, 01:41 PM

those wheels are sick!

bigsj · 06-26-2011, 06:14 PM

Love those wheels cant wait to see them on the truck.

meter swinger · 06-26-2011, 11:20 PM

Very nice. Rushforth makes top notch stuff. Let us know if youre hitting any shows this summer
Posted via Mobile Device

Jonboy · 06-26-2011, 11:28 PM

Quote:

Originally Posted by muthstryker

I actually have round glass tables that the glass is big enough, however, that "little woman" is my mother. I told her my idea and she wasn't having it...

It's a lot easier to ask forgiveness than permission.

Good looking wheels.

jrcaprai · 06-27-2011, 07:47 AM

Seriously, over a thousand dollars per Wheel ?

muthstryker · 06-27-2011, 03:23 PM

Quote:

Originally Posted by jrcaprai

Seriously, over a thousand dollars per Wheel ?

It was over that with my 20% off "friend discount"..

jrcaprai · 06-27-2011, 10:52 PM

Quote:

Originally Posted by muthstryker

It was over that with my 20% off "friend discount"..

Dang, Mr Deep Pockets

INSIDIOUS '86 · 06-27-2011, 11:23 PM

I could use some deep pockets myself haha

muthstryker · 06-28-2011, 12:53 AM

I had to spend big to make sure I was the only one with that wheel on a squarebody

BIG KRIS · 06-28-2011, 01:11 AM

Jason designs some nice wheels.

pig rig · 06-28-2011, 01:15 AM

Quote:

Originally Posted by muthstryker

I had to spend big to make sure I was the only one with that wheel on a squarebody

I hear ya I did the samething

06-26-2011, 03:15 AM	#1
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Finally, My 22s are HERE!!! Kind of... So, I finally got to see the light at the end of the longest tunnel ever. (Had to wait 8 mos for the wheels to be made because I was the first to order them in 22s and they needed a special forging.) These are the front wheels, I will be getting the rears next week they had a problem in the clear coat on the rear wheels so they were re spraying it. The rears will have a bigger lip. Pictures do not do these wheels justice, they really need to be seen in person to appreciate the amount of detail in them. I tried to capture it the best as possible with my camera phone.. And a couple of teaser pics of the wheels on the back of the truck.. (YES, The truck is a shelf right now, ignore the stuff in the bed, I bought a 67 Cutlass and its taking up the garage right now and using up my trucks space..)

06-26-2011, 03:45 AM	#2
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: Finally, My 22s are HERE!!! Kind of... I think they are going to look sweet, when do we see the final pics with rubber? __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project

06-26-2011, 03:50 AM	#3
TheApocalyptican Registered User Join Date: Jun 2010 Location: Las Vegas, Nv Posts: 312	Re: Finally, My 22s are HERE!!! Kind of... Not too sure if I like the 22's part as I'm not typically a fan of anything over 20's but I'll reserve judgement til I see them on the truck with rubber. The design of the rims however are really good looking. Who makes 'em? __________________ 1995 Suburban K2500 454.....off road & towing 1999 Astro, work van 2006 Silverado 2wd 5.3 w/4.5" lift and 33s

06-26-2011, 04:05 AM	#4
bigwheel15 Registered User Join Date: Feb 2010 Location: Fort Worth, TX Posts: 727	Re: Finally, My 22s are HERE!!! Kind of... Too beautiful...I couldn't even drive on those lol.

06-26-2011, 04:37 AM	#5
juiceman650 Registered User Join Date: Jan 2011 Location: San Bruno, CA. Posts: 348	Re: Finally, My 22s are HERE!!! Kind of... They look like Bonspeeds, am I correct? Posted via Mobile Device

06-26-2011, 09:08 AM	#6
88Jimmy4x4 Registered User Join Date: Oct 2003 Location: houston, texas Posts: 1,974	Re: Finally, My 22s are HERE!!! Kind of... wow those are nice...whats the brand and wheel name well worth the wait __________________ 2008 Silverado Z71 RCSB 1991 GMC Jimmy 4x4 1976 GMC Sierra C15 SWB

06-26-2011, 09:13 AM	#7
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Finally, My 22s are HERE!!! Kind of... Well worth the wait. Truck already looks great! This just topped it off... Again! Just need to adress that motor now and get a built thread ! Posted via Mobile Device __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

06-26-2011, 09:25 AM	#8
pig rig Registered User Join Date: Feb 2009 Location: washington the state Posts: 730	Re: Finally, My 22s are HERE!!! Kind of... looks sweet I hope to see it and you at a couple of shows this summer __________________ my sports car rolls on six wheels only because I'm to fat to get in and out of new corvette http://hubgarage.s3.amazonaws.com/ph...ped_detail.JPG

06-26-2011, 09:31 AM	#9
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Finally, My 22s are HERE!!! Kind of... they look good __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

06-26-2011, 11:21 AM	#10
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: Finally, My 22s are HERE!!! Kind of... They are made by Rushforth wheels, they are Concept I's. The fronts are 22x8.5 and the rears are 22x10. I wont be getting rubber on the wheels for awhile because I had the wheels made to fit Wilwood 14" disc brakes, and the front wont go on over my hubs. Kind of messing with the cutlass for a little bit. I was just excited they finally came! As soon as I buy those brakes I will get put everything on right away, still need to get a tranny and have the rear end re built for the motor.

06-26-2011, 11:27 AM	#11
Cherub Registered User Join Date: Feb 2008 Location: Houston Posts: 970	Re: Finally, My 22s are HERE!!! Kind of... oh yea they look killer, now wrap some rubber around them and get that thing on the road! __________________ 2014 LTZ Z71 Silverado 82 C15 LQ4/4L80E Conversion 78 Suburban build (SOLD) 83 4x4 Suburban(SOLD) 82 C15 (my first truck)

06-26-2011, 12:29 PM	#14
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: Finally, My 22s are HERE!!! Kind of... I actually have round glass tables that the glass is big enough, however, that "little woman" is my mother. I told her my idea and she wasn't having it...

06-26-2011, 01:41 PM	#15
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: Finally, My 22s are HERE!!! Kind of... those wheels are sick! __________________ Squarebody Syndicate

06-26-2011, 06:14 PM	#16
bigsj Registered User Join Date: Mar 2011 Location: Bowie Maryland Posts: 335	Re: Finally, My 22s are HERE!!! Kind of... Love those wheels cant wait to see them on the truck.

06-26-2011, 11:20 PM	#17
meter swinger Registered User Join Date: Apr 2009 Location: Kennewick WA. Posts: 1,437	Re: Finally, My 22s are HERE!!! Kind of... Very nice. Rushforth makes top notch stuff. Let us know if youre hitting any shows this summer Posted via Mobile Device



Register or Log In To remove these advertisements.

06-27-2011, 07:47 AM	#19
jrcaprai Registered User Join Date: May 2008 Location: Salt Lake City Posts: 365	Re: Finally, My 22s are HERE!!! Kind of... Seriously, over a thousand dollars per Wheel ?

06-27-2011, 11:23 PM	#22
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Finally, My 22s are HERE!!! Kind of... I could use some deep pockets myself haha __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

06-28-2011, 12:53 AM	#23
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: Finally, My 22s are HERE!!! Kind of... I had to spend big to make sure I was the only one with that wheel on a squarebody

06-28-2011, 01:11 AM	#24
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Re: Finally, My 22s are HERE!!! Kind of... Jason designs some nice wheels. __________________ Flowershop Hip Hop & Street Rods Dropmember 83 Custom Deluxe Almond on Almond 85 Silverado White on Red/Now Chevy LeMans Blue Rendering in Truckin magazine vol 36 no. 11,2010

Register or Log In To remove these advertisements.