SD Parting out 250 6 cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**fredm98** · 06-26-2011, 10:51 PM

Parts from a complete running 250 6-cyl. Prices do not include shipping. Paypal or Money orders.
This is a complete motor, if you dont see something you'd like let me know and I'll add it to the list.

intake manifold - $20

6 cyl fan shroud - $15 --SOLD
250 engine stands - $15 -- SOLD
250 script valve cover - $40 -- SOLD
6 cyl HEI distributor complete w/good cap, rotor, coil, and like new plug wires used only about 6 months. - $50 -- SOLD
250 motor mounts - $15 -- SOLD
250 upper & lower thermostat housings - $20 -- SOLD
1bbl rochester tag# 7025003 base# 7022945 - $10 -- SOLD
6 inch chrome air cleaner - $20 -- SOLD
oem air cleaner - $10 -- SOLD
exhaust manifold - $20 -- SOLD

**fredm98** · 06-26-2011, 10:52 PM

pics 1

**fredm98** · 06-26-2011, 10:54 PM

pics 2

RJGeister · 06-27-2011, 09:03 PM

Fredm98,
Price shipped on the valve cover please? Bonaire, GA 31098

Thanks,
Rich Geister

**fredm98** · 06-27-2011, 09:46 PM

RJGeister $51 shipped.

2002yanks · 06-27-2011, 10:13 PM

would you do $75 for the hei and chrome air cleaner?

68 IRON · 06-27-2011, 10:24 PM

Could I get a quote for the valve cover to 98501....thank you.
-John

**fredm98** · 06-28-2011, 12:43 PM

Quote:

Originally Posted by 2002yanks

would you do $75 for the hei and chrome air cleaner?

Yes, I'll do $75 shipped assuming your location is Auburn NY like in your profile. Please PM me your address and preferred payment method and I'll send you my details. Thanks.

**fredm98** · 06-28-2011, 12:47 PM

Quote:

Originally Posted by 68 IRON

Could I get a quote for the valve cover to 98501....thank you.
-John

$55 shipped. You're second in line.

68 IRON · 06-28-2011, 01:18 PM

Ok, sounds good.

**ScottH** · 06-28-2011, 01:44 PM

Is the thermostat housing (last one in pic #1) have a threaded port for temp sender (would be on bottom of housing in pic, opposite of heater hose connection)?

Thanks
Scott

2002yanks · 06-28-2011, 03:06 PM

pm sent.

**fredm98** · 06-28-2011, 03:56 PM

Quote:

Originally Posted by ScottH

Is the thermostat housing (last one in pic #1) have a threaded port for temp sender (would be on bottom of housing in pic, opposite of heater hose connection)?

Thanks
Scott

No it doesnt here are a couple of pics. I took it apart and it looks pretty strightforward if you wanted to drill/tap it for one. The material isnt real thick like it looks like from the outside.

**ScottH** · 06-28-2011, 04:16 PM

Thanks.....can u do $25 shipped?

2002yanks · 06-28-2011, 05:05 PM

you have $$$ for hei and chrome air filter housing. thanks!!

**fredm98** · 06-28-2011, 05:06 PM

Quote:

Originally Posted by ScottH

Thanks.....can u do $25 shipped?

OK, just PM me your address and let me know how you want to pay. Thanks

68 IRON · 06-28-2011, 08:28 PM

While I'm waiting, are there any dents, cracks or imperfections besides cleaning?

**fredm98** · 06-28-2011, 10:43 PM

Quote:

Originally Posted by 68 IRON

While I'm waiting, are there any dents, cracks or imperfections besides cleaning?

No cracks or dents. The mounting lip will need a little hammer/dolly work from overtightening bolts but that's very minor. For imperfections, it has a little pitting here and there. That might sand out or if not would fill easy with a coat of primer.

68 IRON · 06-29-2011, 04:34 PM

Fred, would you take 40.00 shipped for the valve cover?

camrycurt · 06-29-2011, 05:03 PM

What condition is the exhaust manifold in? What is your price on the manifold shipped to 20176?

Thanks!

**fredm98** · 06-29-2011, 07:15 PM

Quote:

Originally Posted by RJGeister

Fredm98,
Price shipped on the valve cover please? Bonaire, GA 31098
Thanks,
Rich Geister

Quote:

Originally Posted by fredm98

RJGeister $51 shipped.

Quote:

Originally Posted by 68 IRON

Fred, would you take 40.00 shipped for the valve cover?

I'll go as low as $50 shipped.
RJGeister has first dibs - Rich do you want this or let it go to 68Iron?

**qtip** · 06-29-2011, 07:36 PM

is the radiator core good and how much? thanks.

**fredm98** · 06-29-2011, 08:50 PM

Quote:

Originally Posted by qtip

is the radiator core good and how much? thanks.

No sorry I accidently poked a hole in it in storage.

**fredm98** · 06-29-2011, 08:55 PM

Quote:

Originally Posted by camrycurt

What condition is the exhaust manifold in? What is your price on the manifold shipped to 20176?

Thanks!

I'd call it good shape. No cracks or broken tabs. The bypass flapper is about gone but the shaft turns freely. I could do $45 shipped.

RJGeister · 06-29-2011, 08:56 PM

Quote:

Originally Posted by fredm98

I'll go as low as $50 shipped.
RJGeister has first dibs - Rich do you want this or let it go to 68Iron?

Fred,
I'll go $50 shipped. Please PM me your details.

Thanks,
Rich

06-26-2011, 10:52 PM	#2
fredm98 Active Member Join Date: May 2009 Location: Sioux Falls, SD Posts: 110	Re: Parting out 250 6 cylinder pics 1 Attached Images

06-26-2011, 10:54 PM	#3
fredm98 Active Member Join Date: May 2009 Location: Sioux Falls, SD Posts: 110	Re: Parting out 250 6 cylinder pics 2 Attached Images Last edited by fredm98; 06-28-2011 at 04:10 PM.

06-27-2011, 09:03 PM	#4
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: Parting out 250 6 cylinder Fredm98, Price shipped on the valve cover please? Bonaire, GA 31098 Thanks, Rich Geister

06-27-2011, 09:46 PM	#5
fredm98 Active Member Join Date: May 2009 Location: Sioux Falls, SD Posts: 110	Re: Parting out 250 6 cylinder RJGeister $51 shipped.

06-27-2011, 10:13 PM	#6
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Parting out 250 6 cylinder would you do $75 for the hei and chrome air cleaner?

06-26-2011, 10:51 PM	#1
fredm98 Active Member Join Date: May 2009 Location: Sioux Falls, SD Posts: 110	Parting out 250 6 cylinder Parts from a complete running 250 6-cyl. Prices do not include shipping. Paypal or Money orders. This is a complete motor, if you dont see something you'd like let me know and I'll add it to the list. intake manifold - $20 6 cyl fan shroud - $15 --SOLD 250 engine stands - $15 -- SOLD 250 script valve cover - $40 -- SOLD 6 cyl HEI distributor complete w/good cap, rotor, coil, and like new plug wires used only about 6 months. - $50 -- SOLD 250 motor mounts - $15 -- SOLD 250 upper & lower thermostat housings - $20 -- SOLD 1bbl rochester tag# 7025003 base# 7022945 - $10 -- SOLD 6 inch chrome air cleaner - $20 -- SOLD oem air cleaner - $10 -- SOLD exhaust manifold - $20 -- SOLD Last edited by fredm98; 02-06-2012 at 08:29 PM.

06-27-2011, 10:24 PM	#7
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: Parting out 250 6 cylinder Could I get a quote for the valve cover to 98501....thank you. -John

06-28-2011, 01:18 PM	#10
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: Parting out 250 6 cylinder Ok, sounds good.

06-28-2011, 01:44 PM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 250 6 cylinder Is the thermostat housing (last one in pic #1) have a threaded port for temp sender (would be on bottom of housing in pic, opposite of heater hose connection)? Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

06-28-2011, 03:06 PM	#12
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Parting out 250 6 cylinder pm sent.

06-28-2011, 04:16 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 250 6 cylinder Thanks.....can u do $25 shipped? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

06-28-2011, 05:05 PM	#15
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Parting out 250 6 cylinder you have $$$ for hei and chrome air filter housing. thanks!!

06-28-2011, 08:28 PM	#17
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: Parting out 250 6 cylinder While I'm waiting, are there any dents, cracks or imperfections besides cleaning?

06-29-2011, 04:34 PM	#19
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: Parting out 250 6 cylinder Fred, would you take 40.00 shipped for the valve cover?

06-29-2011, 05:03 PM	#20
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: Parting out 250 6 cylinder What condition is the exhaust manifold in? What is your price on the manifold shipped to 20176? Thanks! __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear



Register or Log In To remove these advertisements.

06-29-2011, 07:36 PM	#22
qtip Registered User Join Date: May 2011 Location: jordan minnesota Posts: 7	Re: Parting out 250 6 cylinder is the radiator core good and how much? thanks.

Register or Log In To remove these advertisements.