I need some small sport mirrors . . ... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 04-03-2003, 11:18 AM

for my 74. I'd like some very clean used or the correct GM part #'s to search for some NOS @ dealerships. Any help would be appreciated.

BigRed · 04-03-2003, 01:12 PM

I'll be looking for some of those too soon. The ones off my donor doors have been painted.

I did see that Cheyenne and Classic Industries both have the mirrors in their catalogs. Both are about $130 for a pair. Unfortunately, they don't list the GM part number.

SCOTI · 04-03-2003, 01:37 PM

I know a guy that can get me parts @ cost but I hate to make him chase down numbers.

I've seen LMC lists some in their catalog @ approx 30$ ea? (repops) & Brothers i think was around 120 for the pair but I can't remember if those were NOS or repros. If I find some I'll try for an extra set if possible.

I couldn't find anything through the classics link.

BigRed · 04-03-2003, 02:00 PM

Quote:

Originally posted by SCOTI
I know a guy that can get me parts @ cost but I hate to make him chase down numbers.

I've seen LMC lists some in their catalog @ approx 30$ ea? (repops) & Brothers i think was around 120 for the pair but I can't remember if those were NOS or repros. If I find some I'll try for an extra set if possible.

I couldn't find anything through the classics link.

These are the originals, not repros from my understanding. I dowloaded classic's full catalog in pdf format (it's HUGE). That's where I saw the mirrors.

I looked everywhere online and couldn't find the part numbers. gmpartsdirect.com is not up. I thought they would have them. Oh well.

Blue Beard · 04-03-2003, 02:03 PM

You might try:

http://www.gmpartsdirect.com
http://www.partszoneonline.com

If you can't find it online, give them a call.

78SilveradoSWB · 04-03-2003, 06:50 PM

I looked in my 73-78 GM parts illustration book and part number cross reference book and came up with these part numbers for the chrome sports mirrors.

Chevrolet OEM Part Number is 911582
GMC OEM Part Number is 23.4015

They may have been discontinued though and only reproductions available.

Part numbers above is for the mirror assembly only and not the mounting bracket or gasket or screws.

Hope this helps.

SCOTI · 04-03-2003, 07:40 PM

Thanks for the info. I'll get my parts guy to look it up & see what happens tomorrow.

SCOTI · 04-07-2003, 11:42 AM

ttt

kevhill85 · 04-07-2003, 08:00 PM

i have a set u can have if u want them . they r the small dsq ones. they where on ny truck when i got it . i'll throw them way when i'm done with my truck

SCOTI · 04-10-2003, 06:57 PM

kevhill85, I called & left you a message.

kevhill85 · 04-10-2003, 11:24 PM

a friend truck broke down . he blow a rad . lol.

SCOTI · 04-11-2003, 08:56 AM

I got your PM & the message on my cell. Leaking radiators & phone tag sucks...lol. No prob, I'll try again this afternoon( I'm usually through w/work around 5:30pm).

gldevall · 04-11-2003, 01:55 PM

Hey Kev, do you still have those mirrors?

kevhill85 · 04-11-2003, 10:58 PM

i think SCOTI going to get them tommrow . i don't likr to ship things . lol

SCOTI · 04-13-2003, 01:00 PM

Thanks KevHill.... just what I needed. It was great to meet you. I looked for a dash pad @ the swap meet but didn't find anything nicer than what you already had.

I'll keep an eye out when I'm @ any yards for one. I'll drive out one Sat. when I get the 74 ready.

ElGracho · 04-13-2003, 01:36 PM

I just bought a set of these mirrors from GM. The part number on the box is 00326174. I got a really good price and paid right at $50 a piece for them.

kevhill85 · 04-13-2003, 02:48 PM

thank u scoti. hope the bummper work out for u to . i statred on the dash after u left . we got one layer of fiberglass on it . the motor put back together. lol

04-03-2003, 11:18 AM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	I need some small sport mirrors . . ... for my 74. I'd like some very clean used or the correct GM part #'s to search for some NOS @ dealerships. Any help would be appreciated. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-03-2003, 01:12 PM	#2
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	I'll be looking for some of those too soon. The ones off my donor doors have been painted. I did see that Cheyenne and Classic Industries both have the mirrors in their catalogs. Both are about $130 for a pair. Unfortunately, they don't list the GM part number. __________________ Scott Shelbourne

04-03-2003, 01:37 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	I know a guy that can get me parts @ cost but I hate to make him chase down numbers. I've seen LMC lists some in their catalog @ approx 30$ ea? (repops) & Brothers i think was around 120 for the pair but I can't remember if those were NOS or repros. If I find some I'll try for an extra set if possible. I couldn't find anything through the classics link. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 04-03-2003 at 01:45 PM.

04-03-2003, 02:03 PM	#5
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	You might try: http://www.gmpartsdirect.com http://www.partszoneonline.com If you can't find it online, give them a call. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

04-03-2003, 06:50 PM	#6
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	GM Part Numbers for Mirrors I looked in my 73-78 GM parts illustration book and part number cross reference book and came up with these part numbers for the chrome sports mirrors. Chevrolet OEM Part Number is 911582 GMC OEM Part Number is 23.4015 They may have been discontinued though and only reproductions available. Part numbers above is for the mirror assembly only and not the mounting bracket or gasket or screws. Hope this helps. __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

04-03-2003, 07:40 PM	#7
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Thanks for the info. I'll get my parts guy to look it up & see what happens tomorrow. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-07-2003, 11:42 AM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	ttt __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-07-2003, 08:00 PM	#9
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i have a set u can have if u want them . they r the small dsq ones. they where on ny truck when i got it . i'll throw them way when i'm done with my truck __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

04-10-2003, 06:57 PM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	kevhill85, I called & left you a message. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-10-2003, 11:24 PM	#11
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	a friend truck broke down . he blow a rad . lol. __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

04-11-2003, 08:56 AM	#12
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	I got your PM & the message on my cell. Leaking radiators & phone tag sucks...lol. No prob, I'll try again this afternoon( I'm usually through w/work around 5:30pm). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-11-2003, 01:55 PM	#13
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Hey Kev, do you still have those mirrors? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

04-11-2003, 10:58 PM	#14
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i think SCOTI going to get them tommrow . i don't likr to ship things . lol __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

04-13-2003, 01:00 PM	#15
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Thanks KevHill.... just what I needed. It was great to meet you. I looked for a dash pad @ the swap meet but didn't find anything nicer than what you already had. I'll keep an eye out when I'm @ any yards for one. I'll drive out one Sat. when I get the 74 ready. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-13-2003, 01:36 PM	#16
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	I just bought a set of these mirrors from GM. The part number on the box is 00326174. I got a really good price and paid right at $50 a piece for them. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed



Register or Log In To remove these advertisements.

04-13-2003, 02:48 PM	#17
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	thank u scoti. hope the bummper work out for u to . i statred on the dash after u left . we got one layer of fiberglass on it . the motor put back together. lol __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

Register or Log In To remove these advertisements.