Headers Will they fit?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JasonWynn88 · 07-10-2011, 07:41 AM

I have a pair of headers that came off of a 77 chevy c10 and was wandering if they would fit my 65 c10? Getting ready to drop the 350 that came out of that same truck into my 65. Wanted to see if they would fit before i put motor in. Hoping they will that way i wont have to buy a new set lol.

61_FL_Apache · 07-10-2011, 08:06 AM

Are they long tube or block huggers?

JasonWynn88 · 07-10-2011, 08:24 AM

Long tube

61_FL_Apache · 07-10-2011, 08:43 AM

Hard to say with long tubes. Cant you set the motor in and test fit?

JasonWynn88 · 07-10-2011, 10:19 AM

Yeah i can, just thought i would ask to see if someone would know if they would. Havent put motor in yet just but i dont see why they wont fit isint the 77 and 65 frames and motor mounts about the same?

61_FL_Apache · 07-10-2011, 11:04 AM

I dont know if the frames are the same from 77 to 65.

kieth · 07-10-2011, 11:21 AM

the long tubes also hang down a lot, if you are lowering it a bunch you will want to use some shortys.

**Captainfab** · 07-11-2011, 12:57 AM

It depends on the brand of the headers. Most all of the headers for the '73-'87 trucks will fit the '63-'72 trucks. The issue will be whether or not they will work with the clutch bellcrank that is used in your truck. If you can post a pic of the drivers side header, I can give you somewhat of an idea. If you were switching to an autonmatic transmission, there would be no issue. Of course as Kieth mentioned, they will hang below the frame a little.

07-10-2011, 07:41 AM	#1
JasonWynn88 Registered User Join Date: Jul 2011 Location: Pooler, Georgia Posts: 20	Headers Will they fit?? I have a pair of headers that came off of a 77 chevy c10 and was wandering if they would fit my 65 c10? Getting ready to drop the 350 that came out of that same truck into my 65. Wanted to see if they would fit before i put motor in. Hoping they will that way i wont have to buy a new set lol. Last edited by JasonWynn88; 07-10-2011 at 07:42 AM. Reason: Spelling

07-10-2011, 08:06 AM	#2
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Headers Will they fit?? Are they long tube or block huggers? __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

07-10-2011, 08:24 AM	#3
JasonWynn88 Registered User Join Date: Jul 2011 Location: Pooler, Georgia Posts: 20	Re: Headers Will they fit?? Long tube

07-10-2011, 08:43 AM	#4
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Headers Will they fit?? Hard to say with long tubes. Cant you set the motor in and test fit? __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

07-10-2011, 10:19 AM	#5
JasonWynn88 Registered User Join Date: Jul 2011 Location: Pooler, Georgia Posts: 20	Re: Headers Will they fit?? Yeah i can, just thought i would ask to see if someone would know if they would. Havent put motor in yet just but i dont see why they wont fit isint the 77 and 65 frames and motor mounts about the same?

07-10-2011, 11:04 AM	#6
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Headers Will they fit?? I dont know if the frames are the same from 77 to 65. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

07-10-2011, 11:21 AM	#7
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: Headers Will they fit?? the long tubes also hang down a lot, if you are lowering it a bunch you will want to use some shortys.

07-11-2011, 12:57 AM	#8
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Headers Will they fit?? It depends on the brand of the headers. Most all of the headers for the '73-'87 trucks will fit the '63-'72 trucks. The issue will be whether or not they will work with the clutch bellcrank that is used in your truck. If you can post a pic of the drivers side header, I can give you somewhat of an idea. If you were switching to an autonmatic transmission, there would be no issue. Of course as Kieth mentioned, they will hang below the frame a little. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.